Stone Factory Machines in Spain

Multidisk cutter
Machine meant to work in an assembly line work. It can obtain one or more material strips from a specific width.
Headstocks can have either one axis with more than one disk or they can have several completely independent headstocks which can be mobile or fix.
Machine with a great production capacity, reliability and strength.
Several models depending on the number of headstocks and the width of the working area so it can easily adapt to every costumer’s needs.

The MEB Profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The trolley is 2.300 x 2.300 mm and has a maximum capacity of 30 Ton. The rotation is manual 360º and can be blocked every 90º

H600-CP / H600-L Single Blade Automatic Step Cross Cutting Machine
Cross cutting machine with single blade, transport belt and automatic multiple pass.
H600-CP cross cutting machine allows multiple pass cutting of hard and thick material up to 100mm(or up to 200mm in the H600-L version), guaranteeing at the same time the possibility of single pas cutting.

GH 788-
Place of installation: Colombia
Capacity: 10t
Span: 23m
Lifting height: 8m
GH 757
Place of installation: Thailand
Capacity: 32t
Span: 25m
Lifting height: 7m
GH, European leader in design and manufacture of Gantry Cranes (also referred to as Portal Cranes and Goliath Cranes).
The number of Gantry Cranes installed
turns us into the reference.
GH adapt his Gantry Cranes manufacturing process to the different customer´s requirements, taking care of which kind of work is going to performance.
Gantry cranes and portal cranes from GH Cranes & Components feature vertical legs on wheels that move along fixed runways, typically at floor level. They are highly efficient at moving heavy loads at high speeds, and are used largely outdoors.
Our gained experience from 1958 backed up as specialists in Portal and Semi Portal Cranes.
Lifting capacity: 400T.

The MEM Profiling machine from GRANI ROC is designed for a high precision dressing of blocks, slabbing and profiling production from stone blocks. The machine is mobile and all the movements are controlled by a CNC panel board. The friendly automation and control of all the systems of the machine along with the characteristic of being mobile, make the machine being very versatile and time saving in loading and
unloading operations as well as changing the thickness and shapes to be cut.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel is situated in the lateral part of the machine and moves with it. It has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.

The SPBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks.
The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board.
· The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· Once the profiling file has been input in the machine board, the operator will have the possibility of modifying parameters such as cutting speed, wire speed with a full system of security on possible water shortage, wire broken, wire short or any kind of failure the machine may have
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed.
· The structure of the pillars and beam is made of electrowelded and machined tubes. The trolley is composed of electrowelded tubes forming a framework protecting all sensitive parts of the trolley like rod screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out.
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.

The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
· The movements of the machine are controlled by a 5 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the production of complex shapes as balls, screws, etc.

The PBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 5 axes CNC panel board.
·The movements of the machine are controlled by a 6 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to design the pieces to be profiled, to transfer the *.dxf files to the CNC, to define the parameters of cutting in each step of the cut (speed of cutting, speed of the wire, etc.) and to simulate the path of the wire during the cut.
· The machine has an electric system for bringing closer the small guide wheels that allows the operator to adjust the cutting width until the one desired, reducing the arch value when cutting with diamond wire and thereby increasing its speed
· The guiding wheels are controlled by the CNC and independent motors which allows to position the wheels in the direction of the cut, permitting a faster speed of cutting when profiling.
· The structure of the pillars and beam is made of electro welded and machined tubes. The trolley is composed of electro welded tubes forming a framework protecting all sensitive parts of the trolley: screws, wheels, etc.
· The tensioning of the wire is made pneumatic and automatically with indication of wire breakage or shortage. In this way the machine controls automatically the down movement of the machine, adapting it to the optimum working tension of the wire, avoiding possible breakages and optimizing its behaviour.
· All the main pulleys –drive and tensioning– and guiding wheels are protected by rubber liners in order to get the necessary traction of the wire. Such liners can be easily changed once they are worn out
· The machine is equipped with an automatic cooling system for the diamond wire with detection of constant water pressure. This system stops the machine in the case of lack or insufficient water flow, protecting the tool and preventing possible deterioration or damage of the equipment.
· All the up and down screws are protected with hoods against dust and water
· The machines has an automatic greasing system that injects lubricating liquid in the critical parts of the machine ensuring their correct functioning and the long life of the spare parts.
· The control panel has all the drive and protection components and devices of all control and safety equipment of the machine. All these components are standard, allowing easy and quick maintenance and / or replacement.
· The motorised 360º turntable trolley is controlled by the CNC and has a “Backlash” system that permit the roduction of complex shapes as balls, screws, etc.

Automatic cross cutting with one disc HSA-1
Automatic cross cutting HSA is a cutter to improve the optimization and use of marble, granite, porcelain and sintered stone.
Cuts different width measurements in a single pass with precision and productivity.
Strong and robust structure to support and move heavy parts
Motorized rubber belt to move the pieces to be cut, with 2 speeds of forward. A fast one to reach the desired measure and another slow one to position the material to the exact measure.
Pneumatic clamps to fix the part during cutting
Belt motor head that allows the disc revolutions to be varied according to the material to be cut.
Manual height adjustment that allows adjusting the cutting depth of the blade on the belt
Inverter that regulates the cutting advance speed of the head. In the final stage of cutting, the feed is automatically reduced to eliminate breaks in the material.
It is completed with a rapid return of the head reducing machining times.
The machine is equipped with a PLC that controls the different processing phases.
By means of a touch screen the operator can regulate and control the work cycles
Cut to size via joystick display
The operator takes the material close to the disc to make the first cut, and performs the recognition of the measurement using the joystick. In this way the measure is entered into the machine. You can enter different lengths.
Sequential automatic cut to size
The operator can enter a measurement on the screen (maximum 6)
set one of the following sequences
cutting sequences of different sizes
cutting sequence of a single repeating quota or multiple repeating dimensions
Cutting sequences can be combined with different material widths, creating a useful database for the operator.

Do you need a jib crane for an industrial manufacturing or port application? Then consider a jib crane from GH Cranes & Components, one of the 5 largest crane manufacturer in the world.
Jib cranes from GH Cranes & Components come in four styles: wall jib cranes, column jib cranes, industrial jib cranes and port jib cranes.
Our jib cranes are the ideal solution when you must move loads in a circular direction next to a manufacturing station. They feature an integrated lifting mechanism, typically a chain or wire rope hoist that is either manual or motorized.
Jib Cranes from 125 kg to 20 ton.

The new NDF 6840/35 multiple diamond wire cutter is a multi-wire machine designed to produce panels and plates of variable thickness from large blocks of granite and natural stone. This new unit represents the most modern technology in terms of the primary sawing of stone blocks, becoming the alternative to traditionally used sawing methods, since it quantitatively improves production capacity, efficiently taking advantage of the energy resources necessary to the production of materials and significantly reducing the production costs of the cutting phase.
The multiple diamond wire cutter is a machine that stands out for its efficiency and high productivity, designed to obtain high yields, characterized by its great robustness, thanks to its particular design that forms a compact, balanced and compensated unit where all the movements are concentrated, and its proven reliability and that of the elements that compose it, all of it being designed to withstand the harshest working conditions.
The main structure of the machine is basically made up of two robust columns made up of mechano-welded steel structures, connected to each other by an upper crossbar. The structure of the main frame is mounted on both columns, which joins the two handwheel-carrying carriages, which move vertically supported by both columns on linear guides with recirculating linear roller skates and driven by a pair of laminated spindles with recirculating nuts. balls, synchronized and activated by two motor-reducers with independent servomotors for the ascent/descent of the wires with a smooth and precise displacement, located in the upper part of both columns, the entire guide assembly is perfectly protected by PVC bellows .
The Ø1800 driving drum is made up of a single pulley with multiple channels with grooves and connected to the main motor by means of a pulley and toothed belt transmission. The wires are positioned manually depending on the desired thickness, supported on one side of the machine on the drive drum, and in turn are tensioned from the opposite end by autonomous pulleys. The diamond wires are also guided by two multi-channel drums that help to significantly reduce the deflection produced by them. At the end opposite the drive drum, the diamond wires rest on the set of idler pulleys, designed with a particular pivoting extraction system, which significantly reduces maintenance times.
Once the threads are located, they are adjusted with the active tensioning device that acts individually on each one of the tensioning pulleys, independently ensuring that each one of the threads has the same tension regardless of the minimum differences in length that exist between them. each of the threads that are installed in the machine. The tensioning system manages to increase the useful life of the threads and therefore the profitability of the machine.
The entire machine is characterized by the robustness and reliability of the elements that make it up, all of it being designed to withstand the harshest working conditions, and in this aspect it is precisely where we can contribute all the experience accumulated over the years that we have been designing and manufacturing machinery for this sector.
The NDF 6840/35 multi-wire cutter stands out for the following characteristics:
– Reduced and optimized energy consumption.
– Mechanical robustness and absence of vibrations.
– Active and independent tensioning system, which manages to increase the useful life of the threads, increasing profitability and guaranteeing optimal surface finishes.
– Innovative pulley design, with pivoting extraction system that reduces maintenance times.
– Complete range of cutting thicknesses, thanks to its particular design of pulley packs and combination of grooves, without penalizing the useful life of the diamond wire.
– Excellent cutting precision and flatness, thanks to its particular linear slide guide system and its rigid bearing structure.
– Easy and comfortable access to the inside of the machine, thus facilitating the tasks of changing threads and their maintenance.
– Helical ball screws of large diameter in the vertical movement for a smooth and precise displacement.
– Servomotors synchronized by software in the vertical movements that ensure smoothness in the cut, low consumption, maximum precision and avoid clearances and problems of the central motorization with transmission and forwarding.
– Up to 35 threads with several possibilities for the combination of cutting thicknesses.
– Pre-installation for thread change from Ø7.3 to Ø6.3.

MILLENNIUM 420 CNC 4X Daytona Jumbo Work Center: It is our high-end work center. A unique machine and a benchmark in the market due to its characteristics, among which stand out a robust monoblock structure, all movement systems in an oil bath and a total protection system in stainless steel.
We make the MILLENNIUM420 CNC 4X Daytona Jumbo machining center in accordance with the highest quality standards for CNC machining centers, which guarantees maximum productivity and precision, high levels of finish, as well as high durability and minimum maintenance costs.

Single disc cutter to perform simple and easy cutting jobs, on slabs, steps, baseboards or curbs, in marble, granite, quartz or porcelain.
The surface that supports the piece to be cut is composed of idle nylon rollers to move the material easily. Mechanical stops always keep the piece tailored and aligned to obtain a square cut with precision.
Equipped with a motor that transmits to the shaft by belts. In this way, the revolutions of the disc can be varied, depending on the material to be cut.
It automatically reduces the feedrate of the head in the terminal phase of the cut to avoid material breakage. Making the return of the head quickly and automatically reducing cutting times.

Single-Girder Electric Hoists
Low-headroom hoists
Low-headroom hoists are perfect for using in the small under-beam space in single-girder cranes.
Choose between flat or angled wheels to suit your bottom flanges and running profile, to improve performance and increase the life of your hoist.
Low Headroom single girder hoists
Standard-headroom hoists
Our standard-headroom hoists are the perfect solution when the amount of space under your single-girder crane is not critical, or when you are moving loads between halls.
This configuration is suitable for 1/1 and 2/2 reeving hoists.
Choose between flat or angled wheels to suit your bottom flanges and running profile, to improve performance and increase the life of your hoist.
Normal headroom single girder electric hoists
Standard-headroom hoists ready for curves
This hoist is designed for applications that involve moving loads along paths with turns and changes of direction.
Choose between flat or angled wheels to suit your bottom flanges and running profile, to improve performance and increase the life of your hoist.
Normal headroom single girder electric hoists ready for curves
Double-Girder Electric Hoists
Compact hoists
GH compact hoists are the most compact double-girder hoists available today. Their simple yet robust design makes them ideal for multiple applications that require a compact hoist.
Compact double girder electric hoists
Hoists on end carriages
GH manufacturers a number of hoists that are designed for trolleys with two hoists, rotating trolleys, and other applications that involve end carriages.
Available options include a manual brake release, weighing system and additional safety brake.
Double girder electric hoists on end carriage
Nested hoists
Our nested double-girder hoist is ideal when little space is available between the top of the girders and your roof. We design the trolley to place the hoist between the girders.

It consists of the following elements:
- One roller blocks entry of 1.000 mm.
- One set goteron 4 hp.
- Six Polishers with drive motors and automatic stop programmatically de 2hp x 6 = 12h
- One top chamfering + One lower chamfering with drive and automatic stop programmatically.
- One roller block output 1.000 mm.
- All sealed oil bath heads.
- Heads in sealed boxes liquid fat.
- One conveyor belt with variator and regulation me chanical speed 2hp.
- Vulcanized conveyor belt drive pulley to ensure greater adherence.

- One stainless roller assembly with automatic pneumatic accompanying regulation up and down, depending on the thickness of the stone work. (For working different thicknesses continuously).
- One telescopic stand with wheels for long piece accompaniment.
- Thickness polish 6 cm.
- Dimensions of the machine: 6500 long x 1900 width x 1655 mm high ( with entry and exit rollers included ).
- Total installed power: 26hp

The HM-2 cross cutting machine combines the possibility of cutting with two units with the positioning precision of the mobile spindle, employing advanced technologies when cutting strips of marble and granite. It finds its application in consecutive cuts of different sizes and is ideal for recovering waste material.

Double Head MILLENNIUM Edge Polisher performs a wide variety of edges at high speed, with low tool cost and minimal maintenance.
Modern touch screen and EasyEdge software make the use of the Double Head MILLENNIUM easy and intuitive.
The Double Head MILLENNIUM has a calibrating motor for automatic tool pressure adjustment and a polishing motor with automatic tool wear control. The machine's work table is equipped with a roller system that allows the material to rotate 360°, a pneumatic system for reliable material fixing, and an intelligent safety system.

The new NDF 6870/70 multiple diamond wire cutter is a multi-wire machine designed to produce panels and plates of variable thickness from large blocks of granite and natural stone. This new unit represents the most modern technology in terms of the primary sawing of stone blocks, becoming the alternative to all traditionally used sawing methods, since it improves the productive capacity quantitatively, efficiently taking advantage of the necessary energy resources. for the production of materials and significantly reducing the production costs of the cutting phase.
The multiple diamond wire cutter is a machine that stands out for its efficiency and high productivity, designed to obtain high yields, characterized by its great robustness, thanks to its particular design that forms a compact, balanced and compensated unit where all the movements are concentrated, and its proven reliability and that of the elements that compose it, all of it being designed to withstand the harshest working conditions.
The main structure of the machine is basically made up of two robust columns made up of mechano-welded steel structures, connected to each other by an upper crossbar. The structure of the main frame is mounted on both columns, which joins the two handwheel-carrying carriages, which move vertically supported by both columns on linear guides with recirculating linear roller skates and driven by a pair of laminated spindles with recirculating nuts. balls, synchronized and activated by two motor-reducers with independent servomotors for the ascent/descent of the wires with a smooth and precise displacement, located in the upper part of both columns, the entire guide assembly is perfectly protected by PVC bellows .

The Ø1800 driving drum is made up of a single pulley with multiple channels with grooves and connected to the main motor by means of a pulley and toothed belt transmission. The wires are positioned manually depending on the desired thickness, supported on one side of the machine on the drive drum, and in turn are tensioned from the opposite end by autonomous pulleys. The diamond wires are also guided by two multi-channel drums that help to significantly reduce the deflection produced by them. At the end opposite the drive drum, the diamond wires rest on the set of idler pulleys, designed with a particular pivoting extraction system, which significantly reduces maintenance times.
Once the threads are located, they are adjusted with the active tensioning device that acts individually on each one of the tensioning pulleys, independently ensuring that each one of the threads has the same tension regardless of the minimum differences in length that exist between them. each of the threads that are installed in the machine. The tensioning system manages to increase the useful life of the threads and therefore the profitability of the machine.
The entire machine is characterized by the robustness and reliability of the elements that make it up, all of it being designed to withstand the harshest working conditions, and in this aspect it is precisely where we can contribute all the experience accumulated over the years that we have been designing and manufacturing machinery for this sector.
The NDF 6870 multi-wire cutter stands out for the following characteristics:
• Reduced and optimized energy consumption.
• Mechanical robustness and absence of vibrations.
• Active and independent tensioning system, which manages to increase the useful life of the threads, increasing profitability and guaranteeing optimum surface finishes.
• Innovative pulley design, with pivoting extraction system that reduces maintenance times.
• Complete range of cutting thicknesses, thanks to its particular design of pulley packs and combination of grooves, without penalizing the useful life of the diamond wire.
• Excellent cutting accuracy and flatness, thanks to its particular linear slide guide system and its rigid bearing structure.
• Easy and comfortable access to the inside of the machine, thus facilitating the tasks of changing threads and their maintenance.
• Large diameter helical ball screws in the vertical movement for smooth and precise movement.
• Servomotors synchronized by software in the vertical movements that ensure smoothness in the cut, low consumption, maximum precision and avoid clearances and problems of the central motorization with transmission and forwarding.
• Up to 70 or 72 threads with several possibilities for the combination of cutting thicknesses.
• Pre-installation for thread change from Ø7.3 to Ø6.3.
– STRONG POINTS:
The multiple diamond wire cutter is a multi-wire cutter designed to produce slabs and boards of variable thickness from large blocks of granite and natural stone. Traditionally in granite transformation factories, the sawing of blocks is being carried out to the same size with looms when the blocks are large, or with large diamond disc block cutters in stonework workshops when semi-blocks are cut.
The greatest aspect to highlight is that the multi-wire cutter, for an equivalent capacity, the effective energy consumption is lower compared to any of the methods used. This translates into significant energy savings both in implementation and in production costs. This difference in equivalent energy savings is mainly due to the difference in sawing technology, the multi-wire saw only uses up to 70 or 72 loops of diamond wire and water during this process, cutting continuously. These diamond wires are basically made up of a steel cable covered by diamond rings along the cable, The cutting effect on the stone block to obtain the slabs and boards is produced by the effect of the continuous dragging movement of the threads at a linear speed of about 30 m/sec. combined at the same time with the rotation of the rings, producing a very high cutting power, a differentiated effect with respect to large traditional looms where the cutting process can be defined as the effect of a jigsaw, made up of a frame that houses about 100-130 strips of steel in contact with the stone blocks at the same time moving c in combination with the rain of abrasive mixture of water, steel shot and lime, which produces the same number of incisions in the stone block as quantity of strapping
The multiple diamond wire cutter is the alternative to the primary sawing methods currently used, improving the productive capacity quantitatively, efficiently taking advantage of the energy resources necessary for the production of materials and significantly reducing the waste produced during the cutting phase.
Comparatively, the advantages of using this new technology applied to the multi-wire cutter are evident. The multi-wire cutter can cut any type of stone material compared to the looms that only cut granite or marble, but they are two different models and use different tools, the looms are only profitable when they cut sheets of 2-3 centimeters in length. thickness, but its greatest disadvantage is in energy consumption and the very high production of solid waste, since the water used is recovered in all cases, this waste, apart from assuming a higher purification cost, presents a problem of environmental pollution in case of the looms since it contains iron, and the lime that alters the acidity of the waters, In addition, at the moment it is not possible to separate or recover at this stage of the process. Compared to traditional block cutters, there is an important difference that lies in the cutting height, with a disc we can cut 1.50 meters compared to the diamond wire that can cut any commercial block, apart from the great productive difference that exists.
The water treatment and purification process for this new process is therefore cheaper and less complex.
It is also worth noting that the water needs, although similar to the traditional loom, diamond wire cutting practically eliminates the need to wash the load after sawing, this being much less demanding and both the needs and the water losses during the cutting process are lower.
Another aspect to highlight is that the multi-wire cutter, for an equivalent capacity, the effective energy consumption is lower compared to any of the methods used. This translates into significant energy savings both in implementation and in production costs.
Regarding the consumables, to say that in the multithread cutter there is only one; the diamond wire, of small volume, easy storage and simple supply. The costs derived from storage, stock scheduling and handling are also lower than the strap, shot and lime, necessary for the traditional loom.
In reference to the implementation costs, in the first place the simplicity and the consequent lower cost of the civil works stand out, while in the loom the necessary work constitutes an indispensable part of it, in the multi-wire cutter, this becomes a mere support for it. In addition, in the case of renewal or replacement of the machine, the loom forces the new implementation to be exactly the same model as the previous one, while in the case of the multi-wire cutter there is a high degree of possibility of being able to adapt the existing civil works. In any case, it is important to say that the space occupied by the multiwire cutter is less.
The simplicity of the multi-wire cutter is significantly greater, both in installation, use and handling, as well as in maintenance, both in the mechanical and electrical aspects. It is important to note that the NDF-6870 multi-wire cutter does not use the common solution for vertical movement consisting of a central motor with gearbox, transmissions and angular gearboxes. This is replaced by two independent and electronically synchronized servomotors without coupling between them. This solution, in effect, eliminates the drawbacks of the classic mechanical transmissions, the gaps and possible breakage due to wear and fatigue, and also allows us greater flexibility in the movements to be carried out. In this aspect, it should be noted that the system is capable of working at speeds as slow as one millimeter per minute,
As a practical effect, the NDF-6840/35 cutter is the fastest machine on the market capable of performing a vertical upward movement in the face of any contingency, avoiding undesirable diamond wire marks on the stone.
The surface of the final product sawn with the diamond wire, in addition to the fact that it practically does not need washing, much less the use of acids or harmful chemical products that are dangerous to handle, offers the important advantage that its surface condition can be assimilated to a certain honed In the event that the material must be polished later, a certain reduction in costs associated with the abrasives used in the polishing process and the consequent reduction in production times should be noted.
The high speed of the multi-wire cutter will also allow new users of this technology to schedule production with less notice and greater flexibility than the loom, even allowing a block to be partially cut and the rest to be reserved for a more appropriate time. .
The flexibility of production is also given by the need for clearly lower staff. Preparing the saw on a string saw for a cut consumes less than half the time and less than half the human resources of a traditional strap loom.
With this cutting unit it is intended to integrate the fully automated operation of the primary sawing of stone blocks, with minimal human intervention and therefore a significant reduction in product handling maneuvers, regularization and optimization of the work processes, the increase in production capacity thanks to the reduction of cycle times and the efficient use of downtime, the reduction of energy consumption and the production of waste during the cutting process, and finally the reduction of the associated risks for the personnel involved in the handling and machining of materials throughout each working day.

– WHY BUY OUR CUTTING MACHINE:
The use of diamond wire in primary sawing work has been used in the sector for not many years, and said wire is applied on known machines, normally made up of two pulleys on which a wire is installed. forming a closed loop with which the cuts are made on the stone blocks.
In recent years, machines that use several diamond wires have begun to be used, which are mounted on drums with multiple channels or made up of several pulleys, on which several wires are mounted in order to make several cuts at the same time on the stone blocks, thus obtaining significant productions.
The machines used up to now present different technical problems when it comes to correctly tightening and controlling the loops of wire, in addition to another more significant one, which lies in the possibility of easily varying the position of the pairs of wires with in order to obtain different thicknesses or vary them in the production of boards.
Taking these disadvantages into account, the N.6870 cutter stands out for its simplicity in the device for individual tensioning of the tensioning wheels, and at the same time the variation of processing thicknesses in the slabs and boards to be cut has been simplified in a simple and easy.
NODOSAFER offers its customers, in addition to all the intrinsic characteristics of any wire machine, important improvements such as:
• Architecture based on a robust and compensated structure to avoid vibrations.
• Maximum protection against the penetration of water and dust in the most sensitive parts.
• Helical ball screws of large diameter in the vertical movement for a smooth and precise movement.
• Linear roller recirculation guides on the columns to guarantee the absolute verticality of the cut.
• Servomotors synchronized by software in the vertical movements that ensure smoothness in the cut, low consumption, maximum precision and avoid clearances and problems of the central motorization with transmission and forwarding.
• Large diameter drive drum basic mechanism that prolongs line life.
• Automatic tensioning device by independent pulleys of each one of the threads, with control of position, arrow and tension of each one of the threads.
• Automatic and progressive speed reduction in case of excessive deflection in the line.
• Detection of wire breakage and controlled stop (rapid braking and rising at maximum speed)
• Controlled emergency stop to avoid marks on the cut block.
• Possibility of resuming a cut automatically or semi-automatically.
• Wide range of devices and program functions for operator and machine safety.
• Motorized trolley with optional position control.
• Color operator panel with great ease of use and multiple configuration possibilities.
• Compact electrical panel with the latest technologies.
• High power main motor driven by inverter.
• Button panel for movements in manual mode.
• Automatic lubrication.
- SECURITY
NODOSAFER machines are protected and provide a security closure around their perimeter in accordance with CE security standards.
– BLOCK TROLLEYS
The machine has TWO (2) standard built-in block carriers.

Slot/Kerf and drilling machine for cladding products KERF-2
Ref. 8503
The KERF-2 machine grooves and perforates coating products. It can have different finishes such as:
Kerf I continue
Kerf Reduced
Slot
Vertical drill
Horizontal drill
Incision

STRUCTURE AND DESIGN
The Multiple Diamond Wire Cutter N.6870/72 is a multi-wire machine designed to produce slabs and plates of variable thickness from granite and natural stone blocks.
The structure of the machine is basically made up of two robust columns made up of mechanically-welded steel structures, connected to each other by an upper crossbar. The structure of the flywheel-carrying main frame is mounted on both columns, which moves vertically supported by linear guides with
recirculating linear roller skates and driven by a pair of laminated spindles with recirculating ball nuts, synchronized and driven by two motors. -reducers with servomotors for raising/lowering the wires, located in the upper part of both columns, the entire guide assembly is perfectly protected by PVC bellows.
The entire machine is characterized by the robustness and reliability of the elements that make it up, all of it being designed to withstand the harshest working conditions, and in this aspect it is precisely where we can contribute all the experience accumulated over the years that we have been designing and manufacturing machinery for this sector.
MOTOR DRUM AND TAMBORINOS
The driving drum is made up of a single pulley with multiple grooves and connected to the main motor by means of a pulley and toothed belt transmission. The wires are positioned manually depending on the desired thickness, supported on one side of the machine on the drive drum, and in turn are tensioned from the opposite end by autonomous pulleys.
The drums, like the drive drum, are vulcanized, which increases their useful life and allows continuous work on the machine without delaying tire change downtimes. A movement in both directions of the tambourines allows the channel to be changed quickly and efficiently in the event that
a channel is excessively worn or a thread has not worked effectively. This method contrasts significantly with the change of tires that exists in other types of equipment since it significantly reduces the maintenance of the machine and allows work to be resumed in a considerably shorter period of time.
TENSIONING SYSTEM
The STA is a combination of tensioning systems patented by NODOSAFER that allows the useful life of the threads to be increased, also increasing profitability and guaranteeing optimum surface finishes.
The tensioning is characterized by the individual control of the deflection of each one of the threads, allowing the machine to automatically detect the arc described at all times and tend to equalize the horizontality of all the threads, so that the times block cutting completion times decrease and the consumption of the machine is uniform and balanced. This system also increases the useful life of each thread since, as significant arcs are not formed, all the threads work in a similar way without supporting excessive tensions.
The diamond wires are also guided by two small multi-channel drums that help to significantly reduce the deflection produced by them.
The Cutter N.6870/72 allows to cut a maximum of 2000 mm wide at 21 mm thick, allowing to obtain 71 sheets.
SYSTEM OF PULLEYS, TENSION PULLEYS AND FREE PULLEYS
Innovative pulley system, with pivoting extraction system, which considerably reduces maintenance times. The pulley change is carried out quickly and efficiently without having to disassemble the entire assembly, thanks to their design since with a small maneuver the desired set of pulleys is disassembled in record time.
Once the threads are located, they are adjusted with the tensioning device that acts individually on each one
of the tensioning pulleys, independently ensuring that each one of the threads has the same tension
regardless of the minimum differences in length that exist between each one . one of the threads that are installed on the machine.
HAIR COMB
CONTROL PANEL AND ELECTRICAL PANEL
In the electrical and control installation section, it is worth highlighting the installation of state-of-the-art automatons with programs custom designed by our technicians, so that the programming of the machine is as simple as possible, thus avoiding losses of unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on an operator terminal with a screen, where all the parameters of the cutting cycle are displayed.
A very intuitive and visual display and a radio control complete the maneuverability of the machine as well as the comfort for the operator to carry out his work safely and precisely.
VERSATILITY
The design of the N6870/72 allows, for everything described above, that the operation of the machine by the customer is very simple and intuitive. Each of the required parameters is controlled from the screen and when changing the thickness to be cut, the simple programming of the display indicates the position of each thread on the pulleys and drums without the possibility of error.
SECURITY
NODOSAFER machines are protected by a security closure around their entire perimeter, complying with CE security regulations.
BLOCK TROLLEY
The machine has a motorized block carrier carriage incorporated as standard.

Bridge Image CNC cutter: equipped with high technology that allows high-precision and fast cuts.
Machine of easy placement and assembly that allows its rapid transfer, also occupying a reduced space.
The Image CNC Cutter allows the complete quartering of boards with great precision and speed, since its CNC control manages the sequence of all the movements and cuts of the process, reducing work time, both in its execution time and in its programming.

Machine that allows to obtain holes and cuts with great flexibility. Ref. 8502
Machine for cladding KERF-1000
Ref. 8502 Technical characteristics:
The main feature of the KERF-1000 coating machine is the extreme flexibility in processing that allows to obtain holes and cuts, depending on the configuration required by the customer.
The different types of finish for each anchor can be obtained with a single machine:
Kerf, Slot cutting and drilling

REFERENCE

108 031 025 MACHINE FLAG MURAL ARM DONATI
FEATURES
TURN 180º
250 KG AND 500 KG OF ELEVATION
ELEVATION AUTOMATIC BY BUTTON
LONG ARM 4 AND 5 MT
EIGHT UNITS AVAILABLE.

REFERENCE 103 006 016
THICKNESS MAX A POLISH 100 mm
MACHINE PULICANTOS
DIAMETER PADS 130 mm
MARK / MODEL SSX MD.TE
PROGRAMMING DIGITAL
YEAR OF MANUFACTURING 2006
GREASE MANUAL
HEADS HYDRAULICS
OVERALL DIMENSIONS 7000 X 2300 mm
NUMBER OF POLISH 6
POWER 40 CV
CHAMFERING 1 TOP + 1 BOTTOM
SWING SISTEM BY RODS MAKES STRAIGHT EDGE AND ROUND

New Groover CNC of 12 axes for ventilated facades
HERSEN designs and manufactures special machinery, made to measure, for Large Format Porcelain, Porcelain Stoneware, Sintered Stone, Solid Surfaces, marbles and granites.
This automatic slotting machine makes incisions on the back of the pieces for the placement of the fixing system. In this case, for the STRONGFIX anchoring system. It is a 45 degree double groove in the shape of a dovetail. The aluminum profiles are inserted into these grooves and fixed to the piece with putty.
HERSEN has designed a router that performs a clean and precise cut, obtaining precise and defined incisions. It can slot parts from 100mm to 1600mm wide, which allows ENTIRE BOARDS to be slotted.
The material to be grooved enters through a motorized roller bed, and a controlled mobile guide correctly aligns the material before entering the machine and the heads begin to groove.
It is built with 6 motors installed on 3 bridges. Each bridge has an independent cutting head, composed of two motors with two discs, in this way it is possible to make 3 pairs of grooves at 45º at the same time and separated from each other to any size.
It performs the grooving both continuously and discontinuously. This discontinuous grooving makes it possible to groove parts where windows, doors or corner joints go without the grooving cut being seen by the edges. What makes the façade aesthetically improve and does not weaken the pieces by making unnecessary cuts.

It is also possible to build the machine for the transverse grooving of the board.
It has been equipped with an automatic control and measurement system for the wear of the diamond blades and the depth of the grooves to always obtain the desired measurement of the grooves. Another system automatically fans the diamond blades, optimizing the number of meters of cut and always allowing a clean cut in the incisions.
It has been implemented with custom made software to be able to manage the work orders and breakdowns of the architects. In this way, the execution of the pieces can be managed both from the machine and from the technical office. In this way, the pieces that are being made of each project and each facade are controlled at all times, as well as the pieces that still need to be done.

REFERENCE: 108 024 004
MACHINE: ARM FLAG ROTATING WITH PILLAR
MODEL: JAGUAR C4 Nº 0501027
FEATURES: ARM ROTATING OF 360º
YEAR OF MANUFACTURING 2009
TWIST MANUAL
FEATURES HEIGHT OF COLUMN 4 MT
LONG TOTAL 8,60 MTS
ROUTE USEFUL OF THE HOOK 6,5 MTS

The NRS350 bridge saw is a machine designed to cut any type of stone, both for mass production as well as for cutting exclusive, one-off pieces.
The machine’s entire manufacturing process, from the initial design until its final on-site installation, is carried out by HERSEN, including training in the use of the machine as well as any technical assistance.
The technologically advanced fusion between mechanics and electronics is so simple and efficient that it makes the NSR a high speed, high precision saw in all its movements. In order to ensure accuracy and durability of the machine over the years, the NRS350 Bridge saw is built on a mechanised steel structure, over which are mounted the different mechanical components such as linear cranes, reducers, bearing crowns, etc. For the electronic parts of the machine, HERSEN only installs components and materials made by leading world brands in this sector.
All the software for the NRS250 bridge saw is designed to make the programming for any type of job quick, simple and intuitive. HERSEN manufactures the NSR series for any diameter of disc.
The cutting area is 3.5m x 3.5 m and is made with power capacity from 10HP up to 35HP.

Equipped with high technology that allows high-precision and fast cuts. Machine of easy placement and assembly that allows its rapid transfer, also occupying a reduced space. The Europa CNC Cutter allows the complete quartering of boards with great precision and speed, since its CNC control manages the sequence of all the movements and cuts of the process, reducing work time, both in its execution time and in its programming

Characteristic Specification
NO MAXIMUM OF THREADS 39
WIRE DIAMETER (mm) 5.3
MACHINE HEIGHT (mt) 7.65
MACHINE LENGTH (mt) 11.40
MAXIMUM BLOCK LENGTH (mm) 3500
MAXIMUM BLOCK HEIGHT (mm) 2200
LENGTH OF WIRES (mt) 23.40
VERTICAL MACHINE TRAVEL (mm) 2400
FLYWHEEL DIAMETER (mm) 1800
MINIMUM CUTTING THICKNESS (mm) twenty-one
MAXIMUM CUTTING WIDTH (mm) 1003
DIAMOND WIRE SPEED (mt/sg) 0-40
MAIN MOTOR POWER (Kw) 185

Ideal600 Monoblock Bridge Saw. Machine with head rotation from 0º to 90º, to cut marble, granite, quartz and porcelain slabs. Ref. 8902
Bridge Saw Monoblock Ideal600
Ref. 8902 Technical characteristics:
One-piece self-supporting steel structure.
The structure does not need a foundation and is completely fixed to the ground.
Structure accompanied by tilting bench with wood and rubber surface.
Technical characteristics:
-Maximum cutting length (X axis): 3300mm
-Maximum cutting width (Y axis): 2000mm
-Max cutting thickness (Z axis): 150mm
-Max thickness cut to miter cut: 60mm
-Diameter of disc: minimum 400mm – maximum 600mm
-Max. Miter cut disc diameter: 400mm
-Diameter of disc shaft: 50mm
-Degrees of horizontal rotation of the head: Fixed positions of 0º / 90 °. This head does not interpolate.
-Table dimensions: 3200 × 2000 mm
-Tilt Table Tilt: 85 ° (Approx.)
-Manual table rotation 360 ° with locking of all positions
-Disk motor power: 15Kw
-Motor power (X axis): 2.2 Kw
-Motor power (Y axis): 1.5 Kw
-Power of the up / down motor (Z axis): 0.75 Kw
-Oil pump power 3Kw
-Total power: 23Kw
-Speed ​​of rotation of the disk motor 1440 rpm
-Required air pressure: 6 bar
-Weight of the machine 6500Kg
-Machine dimensions: 5800x3400x2300mm

Cutting machine multidisc with one axle HRG-60. Make one-pass cuts to different types of materials, thicknesses and sizes. Ref. 8701
Cutting machine multidisc with one axle HRG-60
The HERSEN HRG-60 multi-disc cutter is designed to perform longitudinal cutting in a single pass of different types of materials, thicknesses and sizes. In this way we can obtain baseboards, skirting boards, cut samples or recover material with stability and precision.
The material to be cut is placed on the conveyor belt, and with a guide to keep the material aligned during the cutting process.
The disc holder shaft allows us to install several discs and separate them to different sizes to obtain different width measures in the pieces. Equipped with a powerful belt driven motor (not direct drive).
It has motorized vertical regulation to adjust the depth in the cut, diameter and wear of the disc during the cutting process.

Semi-automatic bridge cutter designed to cut boards to size. It can work with a wide range of materials including marble, granite, synthetics and artificial compact porcelain materials.
Thanks to its design and operating processes, the VICTORY NICE has become the benchmark automatic Bridge Cutter on the market.
This cutter is made up of a bridge whose Y axis moves through guides located on two walls.
The variability of disc size and the rotation of the table allow flexibility in carrying out the work, as well as the possibility of making miter cuts at 45º, both manually and automatically (optional).
The rotating and folding table can be fixed in any position thanks to its hydraulic brake. It also has a wedge brake in established positions every 45º of rotation, which ensures a total fixation of the desired position and the stability of the table during the cut.
An advanced user-friendly program and an intuitive 10” touch screen allow easy handling of the VICTORY NICE Bridge Disc.

Characteristic Specs
NO MAXIMUM OF THREADS 60-62
MAXIMUM MACHINE HEIGHT 7.65 meters
MACHINE LENGTH 11.40 meters
MAXIMUM BLOCK LENGTH 3500mm
MAXIMUM BLOCK HEIGHT 2200mm
THREAD LENGTH 23.50m
MACHINE VERTICAL TRAVEL 2400mm
FLYWHEEL DIAMETER 1800mm
WIDTH OF CUT 1600mm
MINIMUM CUTTING THICKNESS 21mm
DIAMOND WIRE SPEED 0-40m/sec
DIAMOND WIRE DIAMETER 6.3-5.3mm
MAIN MOTOR POWER 355kw

The HXL-1 Cutting Machine Performs multiple simultaneous cuts in marble slabs to obtain small strips.

The HD-1 type single axis cutting machine, with one pass, allows the longitudinal cutting of strips and tiles, trimmed after the polishing line; to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
allows the longitudinal cutting of strips and tiles, finding today application in various sectors and processing phases: to cut after the finished line to square pieces without shape; to make baseboards; for mosaics and stone bases in the ornamental field.
Technical characteristics:
It is built with a single shaft for diamond discs;
Ensures quick replacement of both the complete removable disk sleeve, which of each individual disk, thanks to the front opening and upper part of the structure and the particular construction of the spindle;
It is equipped with spacers between the disc and the disc to measure cuts to execute;
It has a support surface made of motorized thick rubber tape, with adjustable advance speed according to thickness and type of material to be cut;
It works by motor / spindle with belt transmission, with the possibility of speed variation; It guarantees a perfect longitudinal cutting precision by particular lateral guides of the conveyor belt;
It has the motor of the shaft of the disc holder positioned so that as much as possible protected from any waste from processing and melting of water, guaranteeing safety, durability and reliability;
It allows the raising and lowering of the spindle support bridge to adjust the depth of cut, to compensate the diameter of the wear of the diamond discs;
It is completed with a wide adjustable lateral material guide bar, equipped, in the insertion part, with clamps that hold the material adhered to the belt and pressed against the guide bar;
Gives the operator complete control of the controls (spindle support lock, disc depth adjustment, guide bar positioning).

The HD-2 type cutting machine with one pass allows the longitudinal cutting of strips and tiles, to make baseboards, mosaics and all kinds of stone bases. By having two axes it allows cutting high thicknesses.

Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it.

The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.

The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.

One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .

By means of the NDF-1289 automatic loading car (optional), we will feed the longitudinal cutter with the material coming from a stevedore, the boards are collected by this automatic feeder, through the use of suction cups connected to a vacuum pump that lowers them until put them in a horizontal position, prepared for their advance towards the cutting unit. The boards are picked up from the horizontal stacker and positioned waiting to enter the production line in
such a way that in successive boards the alignment is maintained and it is not necessary to adjust the starting point of the cutter.

The intermediate roller table constitutes the point of union between the feeding car and the longitudinal cutter. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The longitudinal cutter with 5 heads on mobile bridge N.8000-L-5C and the transverse cutter with 7 heads N.8000-T-7C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks. By alternating the positioning of the cutting heads we can achieve a multitude of measures depending on the needs of the client.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle
with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
The Robot – Palletizer N-3530 (optional) with vacuum suction cup, is specially designed to perform automated palletizing tasks, based on the same operating principles applied in standard Nodosafer palletizing, and offers multiple advantages, optimization of work process , reduction of cycle times and efficient use of downtime. The reception suction cup, of particular design, is made up of a rectangular plate, capable of supporting horizontal loads of up to 120 Kgs.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.
The cutting line N.2990/2200-5+7C basically consists of:
– 1 Intermediate table with motorized plastic rollers, model N.2274.
– 1 Transversal cutter with 7 Ø600 heads and mobile bridge, model N.8000-T-7C.
– 1 Longitudinal cutter with 5 Ø600 heads and mobile bridge, model N.8000-L-5C.
– 2 Cutting tables with motorized band, model N.2304.
– 1 buffer table for sheet metal selection, model N.2590.
– 1 Double displacement table with motorized rollers, model N.2585.
– 2 Motorized band tables for material output, model N.2426.

VICTORY Bridge Cutter with Rotating Head equipped with an automatic head rotation system of 0° and 90°. The head movements in 3 axes plus the inclination of the head for miter cutting, allow high-speed cutting of boards and increase productivity by more than 30% compared to conventional bridge discs.
With the automatic head tilt, the 45° miter cut can be done very quickly and simply.
Automatic work programs for complete exploded views of boards thanks to rotation and the new software.
Automatic adjustment of the tool rotation speed depending on the type of material to regulate tool wear and energy consumption.
All this makes the VICTORY Bridge Cutter with Rotary Head V2 a practical solution that offers high productivity and space savings.

Cutting machine multidisc HR-2
Ref. 8704
The HR-2 type cutting machine performs a single pass longitudinal cut to materials of different thicknesses and different sizes.
By having 2 axes it allows cutting high thicknesses.

Parallel cutting multiheads HLS
Ref. 8601
HLS multi-head parallel machine has high precision and waste reduction.
Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing.
The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.

– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Motorized trolley support rails welded to the structure.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to withstand loads of 35 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.

– Platform with a robust oversized structure to guarantee a long life in extreme load and environmental conditions.
– Trestle with double stowage for boards or slabs, which allows the automatic feeding or stowage of the same from the production lines from one side of the stowage and the manual loading or removal by the operators simultaneously from the other side of the stowage. With this application, machine downtime is reduced, achieving a higher degree of operability and therefore of production of the work lines.
– Swivel base on a toothed slewing ring and support wheels, driven by an electric motor-reducer and with turns positioned at 0o and 180o.
– The operator's position is protected, limiting access to work areas by photoelectric barriers, to avoid any risk of accident.
– The entire structure is oversized and calculated to support loads of 20+20 tons.
– The slewing ring and the bearings installed in the wheels have been sized to withstand radial and axial loads at the time of load and rotation.

Our cutting line N.2995-4C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the toughest working conditions, and it is precisely in this aspect that we can contribute all the experience accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this cutting line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The motorized roller loading table constitutes the feeding point to the cutting unit. In addition, it acts as an intermediate warehouse so that the downtime of the cutting unit is minimal.
The cutter with 4 heads on mobile bridge N.8500, is a machine equipped with the latest technological advances in terms of its mechanical and electronic design. Above all, the linear guidance systems of the headstock bridge supported by two beams parallel to the cutting table stand out, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on which it moves, to carry out the work. cutting.
The movable disc-holder heads supported on linear guides on the bridge, with recirculating linear ball slides, also carry out the vertical movement guided on recirculating ball slides and driven by a spindle.
laminated with ball recirculation nut, to be able to position with great speed and precision, leaving the whole assembly perfectly protected by PVC bellows.
Headstock equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The whole machine and the heads are equipped with an implantation system with centralized greasing for easy maintenance.
Automatic rotary cutting table, it is built on a steel structure with a rectified upper plane, on which the conveyor belt rests with the outer surface covered with rubber to prevent the sheets from slipping during the cutting phase.
The unloading table with band has a frame built based on steel profiles with a transport band for unloading the cutting table simultaneously, while the cutting unit already receives the next board and is ready to cut.
In the electrical and control installation section, it is worth highlighting the installation of state-of-the-art automatons with programs custom designed by our technicians, so that the programming of the machine is as simple as possible, thus avoiding losses of unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on an operator terminal with a screen, where all the parameters of the cutting cycle are displayed.
The cutting line N.2995-4C/2200-G basically consists of:
– 1 Motorized plastic roller table N.2274
– 1 Cutter with 4 Ø600 heads and mobile bridge, model N.8500-800/4C
– 1 Rotating and motorized band table, model N.2304-G
– 1 Motorized band table for material outlet, N.2426.
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
forward speed 11.5m/min
Drive motor power 1.5 hp
CHARACTERISTICS ROTATING TABLE WITH BELT N.2304/2200

Characteristic Specification
table width 2957mm
length max. of the table 4044mm
width max. worked 2200mm
Belt displacement speed 11.5m/min
Drive motor power 4 hp
CHARACTERISTICS OF MOTORIZED BELT TABLE N.2426/2200

Characteristic Specification
table width 2929mm
length max. of the table 3500mm
width max. worked 2200mm
Roller advance speed 11.5m/min
Roller drive motor power 3 hp

Our cutting line N.2405/2200 has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that make it up.
The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained.
The entire line is characterized by the robustness and reliability of the machines that make it up, all of which are designed to withstand the harshest working conditions, and it is precisely in this aspect that we can contribute all the experience
accumulated over the years that We have been designing and manufacturing machinery for this sector.
One of the great advantages that we can highlight of the machines of this production line is that they are models with designs that have already been evaluated in their operation, and that they only differ from our series machines in their fundamental dimensions, but not in all the components that they incorporate. .
The longitudinal cutter with 2 heads on a mobile bridge N.8500-2C and the transversal cutter with 2 heads N.8500-2C, are machines equipped with the latest technological advances in terms of their mechanical and electronic design. What stands out above all are the linear guide systems of the headstock bridge supported by two beams parallel to the cutting table, the first and perpendicular to the second, with precision linear guides and high-precision, high-rigidity recirculating ball slides, on the that it displaces, to carry out the cutting tasks.
The movable disc holder heads supported on linear guides on the bridge, with recirculating ball sliders, also carry out the vertical movement guided on recirculating ball sliders and driven by a laminated spindle with recirculating ball nut, to be able to position very quickly. and precision, leaving the entire assembly perfectly protected by PVC bellows.
Head holders equipped with translation movement through a displacement motor reducer controlled by a frequency converter and a magnetic rule for positioning on the X axis, and a head driven by a spindle and an electric motor reducer for vertical positioning of the cut on the Z axis. The positioning of the heads is simultaneously thanks to the independent converters of each head.
The N.2304 cutting tables are built with a steel structure with a rectified upper plane, on which the motorized transport belt rests with a rubber-coated outer surface to prevent the displacement of the material during the cutting phase. A device to stop the stone, located on the table of the second crosscutter, allows to greatly reduce the times during the crosscutting process.
The table N.2590, located at the exit of the longitudinal cutter, has a system of physical stops, actuated pneumatically, that allows the selection of the strips that have been previously cut according to the width for their subsequent processing in the longitudinal cutter.
The second table N.2585 has a dragging device to join and align the strips prior to their processing in the transversal cutter, as well as the removal of longitudinal waste.
The unloading tables with band N.2426 have a frame built based on steel profiles with a transport band for unloading the cutting table, simultaneously, while the crosscutter already receives the next board and is ready to cut.
Work areas are protected, limiting access to risk areas by means of protection fences and photocells, to avoid any risk of accident.
All machines and heads are equipped with an implantation system with centralized greasing for quick and easy maintenance.
In the electrical and control installation section, it is worth highlighting the implementation of state-of-the-art automatons with programs custom designed by our technical department, so that the programming of the machines is as simple as possible for the operators, avoiding thus wasting unnecessary time. The programming of the work cycle and the visualization of its sequence is carried out on two operator terminals with a screen, where all the work parameters are displayed, as well as the cutting cycles.

The cutting line N.2405/2200 is made up of:
– 1 Longitudinal Cutter Model N.8500/800-2C.
– 1 Transverse Cutter Model N.8500/800-2C.
– 2 Motorized band tables Model N.2304.
– 1 Double displacement table with driver and motorized rollers N.2585.
– 1 Table with N.2590 plate selection stops.
– 1 plastic roller table N.2274-J.
– 1 motorized band table for material output Model N2426.
– 1 motorized band table with hatch.
– Security fencing.
LONGITUDINAL CUTTER CHARACTERISTICS N.8500/800-2c

Characteristic Specification
Machine width 5500mm
Raceway length 5500mm
Maximum separation between discs 2200mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
CHARACTERISTICS TRANSVERSE CUTTER N.8500/800-2c

Characteristic Specification
Machine width 5950mm
Raceway length 5500mm
Maximum separation between discs 3500mm
minimum separation between discs 200mm
Cutting disc diameter 800mm
Maximum height pieces to be cut 300mm
Disc motor power 30 hp (2)
Total installed power 67.5 hp
Water consumption per disc 30 – 40 l/min
TABLE CHARACTERISTICS WITH BAND N.2304/2200

Characteristic Specification
table width 2957mm
max length of the table 4044mm
width max. band 2200mm
Belt displacement speed 6.5m/min
Drive motor power 4.5 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE N.2274/2200

Characteristic Specification
table width 2929mm
max length of the table 3500mm
width max. worked 2200mm
forward speed 6.5m/min
Drive motor power 1 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3700mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp
Centering displacement speed 3.1m/min
Motor power after cross 2 hp
CHARACTERISTICS OF MOTORIZED ROLLER TABLE WITH DOUBLE DISPLACEMENT N.2585/2200

Characteristic Specification
table width 2929mm
max length of the table 3900mm
width max. worked 2200mm
Roller advance speed 6.5m/min
Roller drive motor power 1.5 hp