2024-11-11 15:40:14
Match Your Image Post Your Needs

Quartzite Quarry Hydro-Bags, Rock Splitter

( 47 )

Stone quarrying hydro bags are widely used in natural stone (marble, granite, basalt) quarrying to separate blocks from large masses in quarries. Hydro bags allow blocks of 1000 tons or more to be scrapped without the need to prepare slots to house jacks. The original thickness of the water bag is only 2 mm (0.08"), it can easily slip into a wire saw cut. Quarry Hydro bags, also known as Water Bags, are expanding hydraulic cushions composed of two high tensile steel plates. The water bags expand under the pressure of pumped water at 30-40 bar, allowing a maximum expansion of 25-30 cm (approximately 1') and a thrust of up to 1000 tons. The Hydro-bag is environmentally friendly as only running water (not oil as in hydraulic jacks) is the dilatation fluid. It is safe, even if the hydro-bag's cushion blows due to excessive inflation pressure there is no deflagration because water, not air, is the inflating media. The Hydro-bag does not require any maintenance, throw it away when it is no longer usable. The thrust that can be obtained for a pillow can be up to 1000 tons. Combine two or more pads to achieve higher performance; side by side or together in packs. The quarry hydraulic rock splitter consists of splitting cylinders and a power unit. Cylinders are powered by the high pressure power unit. Fuel tank piston and wedges are the main component of the cylinder. It needs a pre-drill hole of required depth down on the material for movement of the middle wedge. There is a valve on the top of cylinder to control piston work, when the power unit give pressure make the piston work, piston will pressure middle wedge move into bottom, and at the same time, middle wedge will push counter wedges move to sides, a huge horizontal splitting force is produced against to the hole wall, when the tension increases beyond the tensile strength of the material, a split will occur.

More Hide
  • Red Polymer Marble Block Push Air Bag For Various Quarry
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    FOB Price:$145-850

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    red polymer marble block push air bag for various quarry
    1.Air pushing bag 
    2.put into the aperture easily 
    3.Strong pushing power 
    4.Max capacity:200 tons 
    5.can be used for many times
    Pushing air bag is often used in stone quarrying after cutting by wire saw. High-materials
    and special processing technique.
    The characters of our air bags:
    1. Less than 7mm thickness
    2. Strong pushing power
    3. High-tech materials and special processing techniques
    4. No frequent problem in split and damage
    5. Can be reused
    It's max pushing capacity could reach to 200 tons.
    IT CAN BE USED FOR MANY TIMES; SOME OF OUR CUSTOMERS JUST USE ONE BAG
    ONE YEAR!
    Technical Data
    Model Specification Theoretical pushing capacity weight(kg)
    BL1010 1.0m×1.0m 50tons 4.5kg
    BL1015 1.0m×1.5m 75tons 6.8kg
    BL1020 1.0m×2.0m 100tons 9.0kg
    BL1515 1.5m×1.5m 115tons 10.2kg
    BL2015 2.0m×1.5m 150tons 13.5kg
    BL2020 2.0m×2.0m 200tons 18.0kg
    BL3030 3.0m×3.0m 450tons 40.5kg
    Control platfrom for above air bag air pressue 0-6bar,3 outlet 30.0kg
  • Stone Quarry Air Pushing Bags
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    FOB Price:$200-600

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Suitable for pushing over the quarry stone after the cut is made by the diamond wire;
    Extremely slim makes it easy to be put into the cut made by diamond wire;
    Reusable for cost savings
  • G15 Air Rock Picks Pneumatic Hammer
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydraulic Jacks

    FOB Price:$60-100

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    It's widely used in coal mining, soft rock, digging pits for post brackets, digging slots, breaking concrete, frozen earth in construction and installation engineering or constructing works in casting industries.
    G7 G10 G15 G20
    Weight 7.2 kg 10 kg 15 kg 20 kg
    Length 456 mm 570 mm 580 mm 485 mm
    Cylinder Diameter 35 mm 38 mm 42 mm 40 mm
    Stroke 120 mm 155 mm 155 mm 165 mm
    Working Pressure 0.4~0.5 MPa 0.5~0.63 MPa 0.5~0.63 MPa 0.63 MPa
    Impact Energy 30 J 43 J 55 J 60 J
    Impact Frequency 21.6 HZ 16 HZ 16 HZ 16 HZ
    Air Consumption 1 m3/min 22 L/s 26 L/s 23 L/s
    Air Pipe Diameter 19 mm 16 mm 16 mm 16 mm
  • CO2 Quarry Rock Blasting
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydraulic Jacks

    FOB Price:$14000-24000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    1. Gas is safer than explosives. It is not a civil explosive product, and transportation, storage, and use do not require approval.
    2. There is no need for cumbersome procedures for the approval of explosives and strict supervision by the public security department.
    3. There is no destructive vibration and short wave during the blasting process, the proportion of dust is reduced, and there is little impact on the surrounding environment.
    4. It can be used in complex operating environments, such as coal mines and mines.
    5. Carbon dioxide gas is easy to purchase, and some devices can be reused.
    6. Multiple blasting cylinders can be connected in parallel at the same time, the blasting power is large, and the rocks after blasting are large.

    CO2 rock-breaking system is a new type of rock-breaking equipment that can replace explosive blasting. There is no vibration, shock wave, open flame, or harmful gas during the construction of a CO2 rock-breaking system, which is very safe and convenient. And it can be reused, which significantly reduces the construction cost. The emergence of a CO2 rock-breaking system perfectly solves the problem of the prohibition of blasting in mines and rock excavation and the low efficiency of hydraulic breakers! It has been widely used in mining, quarrying, highway construction, construction foundations, tunnel excavation, and other fields.

    How does it work:
    Carbon dioxide gas blasting uses the principle of volume expansion of high-pressure carbon dioxide gas to break rocks.
    01: Use a rock drill to drill a hole with a specified diameter and depth on the object to be blasted.
    02: Put the Rilong brand rock blasting system into the hole and connect the line to the detonator.
    03: The operator starts the detonator to blast according to the on-site conditions.
    04: When the blasting is completed, remove the Rilong brand rock blasting system from the site.
    05: Repeat the process until the entire structure is divided into sections, the sizes of which vary according to the operator’s needs and equipment, ready for dismantling and disposal.
  • Stone Block Polymer Quarrying Pushing Air Bag
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    FOB Price:$100-500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Bestlink Factory Price Quarry Block Air Bag Pushing for Marble Granite
    Quarry block pushing air bag is used to separate the marble, granite, stones (rock mass) block from the basic rock achieving a maximum opening of 45-120cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces. The standard configuration set contains two air bags, with one set of air hose & air control panel.
    Our air pushing bag is manufactured with high-tech materials and processed by special techniques, no frequent problem happened in split and damage.
    Owe to its high-efficiency, reusable, economical and capable to separate, even overturn the blocks easily, tidily and without damage, BESTLINK pushing air bag is displacing the traditional equipments like hydraulic jack and steel hydro-bag in quarries of marble, granite, limestone and so on, no matter blocks cutting by wire saw, blade saw or chain saw.
    We always keep innovating and improving to be the leader of pushing air bag products. Our unique design and advanced tachnique make it easier to put the air bags into the gap after diamond wire saw cutting.
    Through our experiment and co-operation with hundreds of quarries all over the world, bringing in Italian advanced production euiqpments and super level raw material, especially adopting our new technology, Sansung made pushing air bag has got big progress on the quality. With same thickness less than 7mm, but more powerful and safe in long term use.
  • 70ton Four Blades Hydraulic Sawn Stone Splitting Machine Guillotine
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $14000-16000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Hydraulic splitting machine
    It suitable for splitting all types of natural and artifical stones,used for the production of large and small materials for mosaic and stone flooring.and characterized by high reliability and easy handling,every splitting machine can be integrated in a production line,especially designed according to your needs.
    Using our splitting machines you could produce a wide range of products like: Cobble stones, Paving stones, Tiles for paving and cladding, Wall stones and Kerb stones, etc. Our machines are known also as splitters, hydraulic splitting machines, stone splitter or stone cutter (for rustic products).
    The hydraulic system of our machines mainly uses the hydraulic components of German Bosch Rexroth with stable performance, no oil leakage, low noise and long service life and so on.
    Electrical system of our machines is safe, reliable, convenient and flexible and the components are from the brands ofSchneider and Omron.
    The machines can be operated automatically or manually and move continuously or single-step. Equipped with a separate control cabinet, the electric control part can be operated by a total station and a button box. The start-up and operation is very convenient.
    The character of the machine is of intelligent gear cutting head, can adjust itself according to the condition of the stone face, and then, generate hydraulic power to split the stone down in a spot. Therefore it is of high speed, good quality, low consumption and so on, which can improve products quality and production efficiency in a high degree. 
  • Safe Easy Operation Stone Pushing Tool Air Bags for Quarrying
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $180-1000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Safe Easy Operation Stone Pushing Tool Air Bags for Quarrying
    Application:
    Bestlink Polymer blocks air pushing bag is used to separate the marble, granite, stones(rock mass) block from the basic rock achieving a maximum opening of 45cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces. It performs primely and is suitable for blocks splitting after wire saw cutting in quarry.
    And the small air bags also can be used for stone factory to seperate stone slabs after multi-blade saw cutting.
  • Rock and Concrete Block Hydraulic Splitter for Quarry and Construction
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $2000-5000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Rock and Concrete Block Hydraulic Splitter for Quarry and Construction
    Instruction
    1. The hydraulic rock and concrete splitter is a kind of hand-hold splitting and demolition too
    2. It can controllably split rock or concrete
    3. Especially suit for cabined area where large machine can not work
    4. Wodely use in the place where need non-explosive and blast forbidden

    Description:
    1. Hydraulic rock splitter is maninly composed of power pump pack and hydraulic cylinder.
    Mainly applicable to the secondary breaking.
    2. First drill hole in stone, then insert hydraulic cylinders which is contain wedge and feathers,
    Start engine to provide hydraulic pressure.
    3. Repeat the process until the whole structure is fractured into smaller sections and ready for
    Removal.
    Advantages:
    1. Enormous splitting force up to 500 tons & vibration free
    2. Dust free and near silent operation & Light weight and Easy handling
    3. Different sizes of counter wedge and center wedge can use on the same splitter
    Application:
    1. Split all kinds of natural stones, rock, granite, marble mining & quarrying
    2. Remove redundant reinforced concrete structures, concrete machine beds and plinths etc.
    3. Underwater demolition & Demolition in a restricted space
    4. Controlled demolition of pillars, concrete and walls where heavy equipment is impractical
  • Electric/Diesel Hydraulic Rock Stone Concrete Splitting Machine
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $2000-5000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Quartzite, Sandstone

    Machinery Function Features:

    Electric/Diesel Hydraulic Rock Stone Concrete Splitting Machine
    It is our newly developed products for quarrying and civil construction, which is mainly applicable to the secondary breaking of large boulders, squaring breaking of large boulders ,squaring blocks. Driven Mortor: Electric / Diesel / Gasoline / Pneumatic.
    BS36/38/40 uses Iron Cylinders, BS42/45 have both Iron and Aluminium Alloy cylinders. Aluminium Alloy cylinder is ighter and stronger. Besides, we already successfully copied the same cylinder from German Darda, and the model no. is C12 (N), it is with the same shape,same parts and same performance as the original one.
    Features:
    1)Enormous splitting force up to 410 tons
    2)Dust free and near silent operation
    3)Vibration free
    4)Light weight
    5)Precision work
    6)Always controllable
    7)For use in close quarters and hard to access places. 
    8)Easy handling
  • Bestlink Factory Directly Custom Size Quarry Blocks Pushing Air Bag for Mining
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $142-850

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Factory directly custom size quarry blocks pushing air bag for mining
    Advantages:
    1.Less than 7mm thickness
    2.Strong pushing power
    3.High-tech materials and special processing techniques
    4.No frequent problem in split and damage
    5.Can be reused
    6.After inflation by air compressor, the pushing power of the air bags can reach 50 tons to 450 tons according to different sizes of the pushing bags.
    Polymer blocks pushing air bag is used to separate the marble, granite, stones(rock mass) block from the basic rock achieving a maximum opening of 45cm at the top.The air bag can separate the block (rock mass) which is having all side wire saw cut faces.
  • Block pushing air bag  1.0m*1.5m for sandstone, limestone quarry
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $140-850

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Manufacturers of Mining Equipment China Gold Quarry Stone Machine Block Pushing Air Bag
    Quarry block pushing air bag is used to separate the marble, granite, stones (rock mass) block from the basic rock achieving a maximum opening of 45-120cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces. The standard configuration set contains two air bags, with one set of air hose & air control panel.
    Our air pushing bag is manufactured with high-tech materials and processed by special techniques, no frequent problem happened in split and damage.
    Owe to its high-efficiency, reusable, economical and capable to separate, even overturn the blocks easily, tidily and without damage, Bestlink pushing air bag is displacing the traditional equipments like hydraulic jack and hydro-bag in quarries of marble, granite, limestone and so on, no matter blocks cutting by wire saw, blade saw or chain saw.
    We always keep innovating and improving to be the leader of pushing air bag products. Our unique design and advanced tachnique make it easier to put the air bags into the gap after diamond wire saw cutting.
    Through our experiment and co-operation with hundreds of quarries all over the world, bringing in Italian advanced production euiqpments and super level raw material, especially adopting our new technology, Bestlink made pushing air bag has got big progress on the quality. With same thickness less than 8mm, but more powerful and safe in long term use.
    Quarry block pushing air bag is used to separate the marble, granite, stones (rock mass) block from the basic rock achieving a maximum opening of 45-120cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces. The standard configuration set contains two air bags, with one set of air hose & air control panel.
    Our air pushing bag is manufactured with high-tech materials and processed by special techniques, no frequent problem happened in split and damage.
    Owe to its high-efficiency, reusable, economical and capable to separate, even overturn the blocks easily, tidily and without damage, Bestlink pushing air bag is displacing the traditional equipments like hydraulic jack and hydro-bag in quarries of marble, granite, limestone and so on, no matter blocks cutting by wire saw, blade saw or chain saw.
    We always keep innovating and improving to be the leader of pushing air bag products. Our unique design and advanced tachnique make it easier to put the air bags into the gap after diamond wire saw cutting.
    Through our experiment and co-operation with hundreds of quarries all over the world, bringing in Italian advanced production euiqpments and super level raw material, especially adopting our new technology, Bestlink made pushing air bag has got big progress on the quality. With same thickness less than 8mm, but more powerful and safe in long term use.
  • Hydraulic Rock Splitter - Stone Splitting Machine
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $5000-55000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Our Hydraulic stone splitting machine is suitable for splitting all types of natural and artificial stones, cube stone/curb stone/wall stone/blockstone/tiles/pavingstone/countertops/vanity tops.
    It has floating teeth up and down,we also called it individual chisels which can make Hydraulic stone splitting machine tch the natural surface of the stones perfectly.
    Every splitting machine can be integrated in a production line, especially designed according to your needs.
    The main characters of our machines are:
    1. The electrical control cabinet adopt the French Schneider, with internal layout reasonable and neat, and
    through the senor switch to facilitate rapid signal to make the movements of the machine consecutive and accurate.
    2.The hydraulic system adopts from German Bosch Rexroth, providing sustainable,stable and sufficient
    power to the machine.
    3.With intelligent gear cutting head, itcould adjust itself according to the smooth condition of the stone surface.
    4. We can design a wonderful stone cutting line from blocks to paving stone, wall stone, mosaic, cobble stone, etc, upon the demand of customers
  • Quarry Air Pushing Bags
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $180-800

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Owe to its high-efficiency, reusable, economical, and capable to separate and even overturn blocks easily, tidy and not damaged, our air pushing bags are displacing equipment like hydraulic jack and hydro bags in quarries of marble, granite, limestone and so on, no matter blocks cutting by wire saw, blade saw, chain saw, flame jet or cracking powder. We keep innovating and improving to be a leader of air pushing bags, our unique design without an air hose inside makes it easier to put air pushing airbags into cracks between blocks.
    Through our experiment and cooperation with thousands of quarries around the world, introducing Italian advanced equipment and raw material, especially adopting our new technology and new materials, quality of air pushing bag has a new qualitative leap, thickness is same as less than 8mm, but more strength, more reliable quality and longer designed life-span more than half a year, especially more safety.
  • DARDA Hydraulic Rock and Concrete Splitters
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $1800-5800

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    DARDA hydraulic Rock and Concrete Splitters
    The hydraulic rock and concrete splitter is a kind of hand-hold splitting and demolition tool. It can controllably split rock or concrete. Especially suit for cabined area where large machine can not work.Such as hydraulic breaker and place where is strictly limited of noise, dust, flying debris, shake, exhaust gas, also widely use in the place where need non-explosive and blast forbidden.
    Hydraulic Splitter models and parameters: BS36/38/40 BS42/4546/48
    Driven Mortor: Electric / Diesel / Gasoline / Pneumatic.
    BS36/38/40 uses Iron Cylinders,
    BS42/45 have both Iron and Aluminium Alloy cylinders.
    Aluminium Alloy cylinder: Lighter and stronger! !
    Besides, we already successfully copied the same cylinder from German Darda, and the Model No. Is C12 (N), ithave the exact same shape, same parts and same performance as the original one.
  • 2021 Granite Block Pushing Air Bag
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $150-900

    Warranty: 12 Months

    Usage: Granite, Basalt, Quartzite

    Machinery Function Features:

    Products Features
    The Pushing Air Bag is manufactured with high-tech materials and processed by special techniques, no frequent problem in split or damage reusable.
    The standard configuration set: Each set contains two air bags, with one set of air pipe & air control panel.
    Application
    It performs primely and is suitable for blocks splitting after wire saw cutting in quarry. Polymer blocks pushing air bag is used to separate the marble, granite, stones(rock mass) block from the basic rock achieving a maximum opening of 45cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces.
    Technical Data
    Specification ----------------Pushing capacity
    50×50 cm --- 15tons
    100×50 cm ---25tons
    100×100 cm---50tons
    100×150 cm---75tons
    100×200 cm---100tons
    150×150 cm---115tons
    200×200cm---200tons
    200×220cm 220tons
    Advantages
    1,Thickness less than 7mm
    2,Pushing power can be 20 to 200 tons
    3,Durable and repairable
    4,Price is economic
  • Pneumatic Rock Splitter-Pnuematic Splitting Device Rock Breaking Air Hammer for Quarry
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite

    Machinery Function Features:

    Pneumatic splitter is also called pneumatic hammer, air hammer, pick hammer, etc.
    It's specially designed for block secondary splitting or squaring, it can complete instead of the dynamite blasting or traditional manual splitting device.
    It can be used for reinforce concrete breaking or removing, such as the construction building part demolition, bridge dismantling, demolishing underwater.
    To use the light-weight pneumatic hammer and suitable Plug and feathers for splitting the blocks, it will be more efficiency and less cost than the traditional hand splitter.
    Product Feature:
    1 wedge and shims for rock, stone and concrete breaking or removing
    2 world popular shape design
    3 durable raw material
    4 various size
  • Silent Splitting Hydraulic Splitter for Concrete Rock Demolition
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $1000-5000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    The hydraulic Rock & Concrete splitter is our newly developed Product which is a powerful and extremely cost-effective alternativeto other conventional demolition techniques. It functions according to theproven wedge principle where by a strong force is applied in an extremely constricted space.
    Rock and concrete put up considerable resistance to forces applied externally. By comparison the resistance of rock and concrete to force applied internally is 90% less, with the result that they disintegrate relatively easily.
    The hydraulic rock & concrete splitter is the most suitable tool for demolition It has many advantages: small cubage, light, easy to operate, high efficiency etc. Now it is widely used in stone quarry, mineral mining and capital construction. It is also an indispensable tool in clearing the barrier in city construction, river dredging, salvation etc.
  • Concrete Demolition Stone Block Silent Crack Hydraulic Rock Splitter
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $1000-5000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    The powerful and economic way to split rock and demolish concrete. Hydraulic rock and concrete splitters provide a powerful and extremely cost-effective alternative to other conventional demolition techniques. Hydraulic splitting means controlled splitting, and its method eliminates shock waves, vibrations, dust and noise that large impact and concrete splitters have been used with great success in over 100 countries for the past 40 years. The high quality, reliability and durability of the equipment is unsurpassed
    The hydraulic splitters work according to a safe and proven wedge principle, or through working principle of hydraulic piston.
  • Air Bag For Mines -Quarry Air Pushing Bags
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $20-30

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone

    Machinery Function Features:

    The capstone airbag is one of the special tools for pushing or knocking down large blocks of blocks after cutting with a diamond wire saw in stone mining. The thickness of the capstone airbag is less than 7mm, and it is easy to put into the seam after cutting by the diamond wire saw. Use the mine air compressor to inflate the airbag, and the airbag expands, and the large stones are easily pushed away and pushed unscathed. It can be used many times; the company has long-term cooperation with many mines, and the products are constantly upgraded and improved, which is a powerful helper for mining.Air Pushing Bag is manufactured with High-tech materials and processed with special techniques, with no frequent problems with split and damage.
  • Quarry Stone Block Displacement Bag Or Cushions, Quarry Air Pushing Bags
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $180-350

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    It can be used to used to separate the marble, granite, stones(rock mass) block from the basic rock achieving a maximum opening of 45cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces.
    The thickness of our air bag is less than 7mm. It can be put into the cutting aperture easily. Aerated the air bag with the air compressor, the inflation of air bag can bring pushing power which can be from 20 to 200 tons according to different size of bag. This pushing power can push over big blocks easily. Our air bag's raw materials are imported from Japan. Our air bag is durable and repairable. It is one of the lowest cost pushing tools.
  • Hydraulic Rock Splitter
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    Warranty: 12 Months

    Usage: Granite, Marble, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    Working on the wedge principle the Hydraulic splitter is the most powerful hand operated tool where splitting force of 350 Ton overcomes any amount of binding strength of rock or concrete cracking it in just seconds.
    Demolition by Splitter is the only solution where blasting is prohibited. Controlled cracking, noiseless - environ friendly operation, user friendly operating techniques, portability, speedy demolition etc. turns hydraulic splitting as an economical substitute in the field of excavations & demolitions.
    The Splitter is inserted in a pre-drilled hole of diameter 48-mm & depth 18 inch. The Hydraulic pressure of 450 to 500 bar (45 MPA) forces a center wedge between the two counter wedges pressing them apart with splitting force of 350 Ton. The force is further transferred to the walls of the hole in the rock and cracks the material in just seconds.
  • Hydraulic Stone and Rock Splitter Splitstone S100 for Quarry
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Basalt, Quartzite

    Machinery Function Features:

    SplitStone is hydraulic stone and rock splitter for block and dimension quarry
    The multi unit is typically mounted to tractor or excavator boom or to crane, where the zoom type hydraulic boom is recommended for the longest reach. Each unit has the client specified number of hydraulic wedges. At granite industry for primary splitting up to 20, secondary splitting typically around 12 and like at limestone applications 8.
    Also at the granite quarries the unit is typically equipped in the middle one or two “Opening Wedges”, which after the initial split will be dropped deeper in to cracked hole and from there used to separate the rock totally loose. Every wedge cylinder is mounted to tool balancer. This allows effortless installation of the wedges in to the holes and when the split is done, the loosened cylinder will rise automatically. Hydraulic recommendation is up to 250 bar (3600 psi) and the unit is either radio or remote cable controlled. The cross bar can be equipped with 360 deg. hydraulic rotator to add convenience. S 100 is patented and meets European CE- safety requirements.
    Tecnical details:
    Cylinder diameter 100 mm
    Wedge diameter 29 mm
    Bore size 30 - 32 mm
    Minimum drilling depth 700 mm
    Wedge length 400 mm
    Total length with wedges 1125 mm
    Weight of single wedge 30 kg
    Total weight ~950 kg
    Maximum required
    hydraulic pressure 250 bar
    Flow requirement 50 - 60 l/min
  • Special Air Bag For Quarrying- Stone Quarry Air Pushing Bags
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    $200-750

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Suitable for pushing over the quarry stone after the cut is made by the diamond wire;
    Extremely slim makes it easy to be put into the cut made by diamond wire;
    Reusable for cost savings.
  • SOOSAN SB81 Hydraulic Breaker for 18-26 ton Excavator
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydraulic Jacks

    $1000-10000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Our hydraulic breaker could fit to any brand excavator from 0.5-70 ton
    Chisel from 35-210 mm
    Unit price with spare parts as below:
    1: With plywood box package
    2: With standard spare parts
    2 chisels
    2 oil piping
    1 N2 gas bottle
    1 tool box
    1 N2 pressure gauge
    Deliver time: 7-15 days after down payment
    Deliver method: By sea or by air based on your request
  • Quarry Hydro Bags - expanding steel cushions
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Hydro Bags are expanding steel cushions whose technological brilliance lies in their basic ability to move slabs or blocks of up to 1000 tons or more without the need to prepare slots to house the jacks.
    Hydro Bags have a thickness of just 2mm and can easily be slipped into the diamond wire saw cut.
    They consists of two sheets of high tensile steel welded together using the latest laser techniques.
    Water is hydraulically pumped in at a pressure of 30-40 bar expanding them up to 25-30 cm resulting in a thrust force of up to 1000 tons.
    By coupling two or more cushions side by side or combined together in packs it is possible to obtain greater displacement.
    It must be pointed out that our Hydro Bags only use running water as an expansion fluid and not oil as with other hydraulic systems. It is for this reason that Hydro Bags are classified as environmentally friendly.
    NB! Hydro Bags don’t require any maintenance for the simple reason that they are only used once.
    To summarise, Hydro Bags are a simple, versatile and economical tool that have revolutionised the moving of quarry slabs.
    All this means savings from the following:
    Elimination of the time necessary for the preparation of the slots for jacks
    The blocks of stone are obtained with their sections intact
    Total elimination of explosives which can potentially damage the product
    Partial or total elimination of hydraulic jacks
    Less noise and dust caused by the presence of pneumatic hammers
    Respect for the local environment
    Increased safety for the operators
    Limited maintenance
  • Pompa Hydro Bag
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Hydrobag is a pump for filling cushion with water, for borrow material excavation.

    Hydro bag is composed by:

    - pressure power unit Hydro bag with electric engine 5,5 Hp

    - supported wheelbarrow and water reservoir

    - safety and distribution valves

    - aspiration and pressure pipes and aspiration filter

    - Series of fast couplings - thrust up to 1000 tonnes, dilatation 25-30cm

    - supply plug and engine - saver interrupter.

    Cushions are available: CM 50x50, CM 80x80, CM 50X100, CM 100x100, CM 150x150.
  •  Pump For Hydrobag Quarry Equipment
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone

    Machinery Function Features:

    Pump for hydrobag.

    Datasheet:
    Pressure 30 bar
    Max pressure (50 bar Max)
    Scope litres / min 11
    Time filling cushion 100×100 – H = 20 cm. 19 minutes
    Power installed 1.1 kW (1.5 hp)
  • Quarry Hydro Bag with Motor
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    THE HYDRO (WATER) BAG IS MANUFACTIRED FROM THE FINEST HIGH QUALITY TENSILE STEEL , HEREBY QUARANTEEING FLAWLESS PERFORMANCE .THE BAG IS INSERTED IN THE CRACK IN THE BLOCK AND IT SEPARATED THE BLOCK AS S0ON AS WATER IS INSERTED IN THE BAG WITH THE HELP OF THE WATER PUMP.
    DIMENSION
    1 * 1 MTR
    1 * 0.5 MTR
  • 90Mm Rock Blasting Splitting Tube Rock Demolition Pipe
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $5-7

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Product Overview
    The 90mm O₂ Rock Demolition System Splitting Tube is a specialized component used in the liquid oxygen rock blasting system, designed to efficiently and safely initiate rock demolition with high explosive power. This tube plays a critical role in the O₂ rock blasting technology, which uses liquid oxygen as a gas expansion agent to generate controlled explosions for rock fragmentation. With a diameter of 90mm, it is optimized for use in drilling operations with hole diameters ranging from 90mm, providing a powerful and environmentally friendly alternative to traditional explosives.

    Key Features
    High-Performance Blasting: The 90mm splitting tube utilizes liquid oxygen, which, when mixed with combustibles, rapidly expands and ignites to create a powerful explosion. This results in a highly effective and efficient blasting process that provides 50-150% more explosive power than conventional mining explosives, at a significantly lower cost.

    Safe and Environmentally Friendly: Liquid oxygen as the primary blasting agent is non-polluting and environmentally friendly, making it an ideal choice for mining and construction operations focused on sustainability. The technology reduces pollution and minimizes the need for large amounts of explosives, offering a safer alternative to traditional blasting methods.

    Flexible and Lightweight Construction: The splitting tube features a unique structure made from a special paper tube, with accessories that enhance safety during operation. The tube's exterior is typically made from soft plastic or glass, which reduces the need for heavy steel structures, decreasing overall blasting costs and improving operational efficiency.

    Durability and Safety: The 90mm splitting tube is designed to withstand the harsh conditions of rock drilling and blasting. Its internal structure is carefully engineered to ensure safety during the blasting process, minimizing the risks associated with accidental explosions.

    Customizable Length: The length of the splitting tube can be customized based on the specific requirements of the blasting operation. Typically, the tube lengths range from 2 meters to 15 meters, ensuring compatibility with various hole depths and sizes.
  • Titano Oleodynamic Quarry Bench Pushing Unit
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydraulic Jacks

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    A pair of hydraulic cylinders for bench tipping. The unit composed of:Oleodynamic device equipped with a two stages pump for use 700 atm. That can be powered either by tree phase 3 HP electric motor 220/380 Volts with reversing (Tiatano/E Model) or by compustion engine 5 HP and automatic adjuster (Titano/SC model) or by pneumatic motor 3.5 HP(Titani/PN). The unit is composed of: two jacks manufactured in specially treated stell whit chromed cylinder and complete with quick couplings, safety valves and limit switch; each jack ton pushing capacity.

  • 127Mm O2 Rock Breaking Tube Stone Demolition Pipe
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $7-9

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Product Overview
    The 127mm O₂ Rock Demolition System Splitting Tube is a revolutionary component designed for the gas expansion rock demolition technology, offering a safe and environmentally friendly solution for rock fragmentation. This advanced tube harnesses the power of liquid oxygen and combustible materials to generate controlled explosions, making it an ideal choice for mining, construction, and demolition projects.

    Key Features
    Controlled and Efficient Demolition: The 127mm splitting tube utilizes the principle of gas expansion to break down rock formations. By combining liquid oxygen and combustible materials, such as rolled paper, the tube creates a rapid and controlled explosion, effectively fracturing the rock without the need for traditional explosives.

    Reduced Environmental Impact: Unlike conventional blasting methods that rely on explosives, the gas expansion rock demolition technology employed by the 127mm splitting tube significantly minimizes environmental harm. It eliminates the use of hazardous materials and greatly reduces vibrations and other harmful effects associated with traditional blasting techniques.

    Superior Safety: The absence of explosive materials in the gas expansion rock demolition system enhances overall safety during transportation, handling, and operation. This feature makes the 127mm splitting tube an attractive choice for projects where safety is a top priority.

    Customizable Dimensions: The splitting tube is designed to accommodate a wide range of drilling operations, with a diameter of 127mm optimized for hole sizes ranging from 60mm to 150mm. Additionally, the tube length can be customized to meet specific project requirements, typically ranging from 2 meters to 15 meters.

    Robust and Durable Construction: Constructed from specialized materials, the 127mm splitting tube is built to withstand the extreme conditions of rock demolition operations. Its complex internal structure ensures reliable performance and longevity, minimizing the risk of malfunctions and maximizing operational efficiency.
  • Iron Retractor Stone Quarry Hydrobags
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    For every requirement, from quarry to the job site, to lift 200 tons with only 1/2 m3 of water. Small thickness of hydrobag allows the use in small cracks of only 10 mm. The reduced weight allows high hand transportability. To satisfy all lifting requirements it is also available in double or triple sheet.
    Datasheet:
    Size Weight Pressure Thrust Max Open
    500×500 mm. 2,9 Kg. 30 bar 75 ton. 20 cm.
    750×750 mm. 6,6 Kg. 30 bar 169 ton. 20 cm.
    500×1000 mm. 5,9 Kg. 30 bar 150 ton. 20 cm.
    1000×1000 mm 11,7 Kg. 30 bar 300 ton. 20 cm.
    1500×1500 mm. 26,3 Kg. 30 bar 675 ton. 20 cm.
  • Pneumatic Tipping Cushion Quarry Air Pushing Bag
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Air Pushing Bags

    Warranty: 12 Months

    Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Splitting cushions in polyester material spread with PVC and FH sealed. Instertable in size of 9mm with adequate protective sheet. Maximum inflated pressure 3 Atm. Max. split to a limit of 45 cm.Complete with an inflatable centre suitable for the use of maximum of 3 cushions simultaneously.
  • O2 Rock Demolition System Plastic Gas Filling Pipe
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $1-2

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    O₂ Rock Demolition System Plastic Gas Filling Pipe
    The O₂ Rock Demolition System Plastic Gas Filling Pipe is a critical component that serves as the essential connection between the gas filling tank and the splitting tube. This disposable consumable plays a vital role in the safe and efficient transmission of liquid oxygen during rock demolition operations.

    Key Features
    Efficient Liquid Oxygen Transfer: The primary function of the plastic gas filling pipe is to facilitate the seamless transfer of liquid oxygen from the gas filling tank to the splitting tube. Its specialized design ensures an uninterrupted flow of liquid oxygen, enabling smooth and effective rock demolition processes.

    Superior Sealing Capabilities: Constructed from high-quality materials, the plastic gas filling pipe boasts exceptional sealing properties. This feature guarantees minimal loss of liquid oxygen during the transfer process, optimizing the system's efficiency and minimizing waste.

    Customizable Lengths: To accommodate the diverse requirements of various job sites, the plastic gas filling pipe is available in different lengths. Customers can specify the desired length, ensuring a perfect fit for their specific rock demolition operations.

    High-Pressure Compatibility: The plastic gas filling pipe is engineered to withstand the high pressures associated with liquid oxygen transfer. Its robust construction ensures safe and reliable operation, even under demanding conditions.

    Disposable Design: As a consumable component, the plastic gas filling pipe is designed for single-use applications. This disposable nature eliminates the need for complex maintenance procedures, reducing operational costs and ensuring optimal performance with each use.
  • HYDROSPLIT HS-230 Hydraulic rock splitting cylinders
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Special double acting hydraulic cylinder that drives a wedge, mounted upon the shaft, which, when inserted between a pair of lateral feathers, creats a considerable pressure agains the sides of the hole into which the conical assembly has been placed, thus achieving the breakage of the material.

  • HYDRO BAG Tipping cushions using high pressure water
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterQuarry Hydro-Bags

    Warranty: 12 Months

    Usage: Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    HYDRO BAG Tipping cushions using high pressure water

    HIDRO-BAG offer the following advantageous:

    features:

    -doesnt ruin the block

    -weight a mere 8 kg

    - it is only 2mm thick

    -can be iserted in the diamond r helicoidal saw cut

    -has a thrust development of 300 tons

    -works with water, at 30 atm only.

    -it is provided whit rapid coupling

    -does not required maintenance

    -can be thrown after use
  • O₂ Rock Blasting System Technology: A Powerful And Sustainable Solution
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $6-8

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    O₂ Rock Blasting System Technology: A Powerful and Sustainable Solution
    The O₂ Rock Blasting System Technology revolutionizes the rock breaking and demolition industry by offering a powerful, safe, and environmentally friendly alternative to traditional mining explosives. This cutting-edge technology harnesses the explosive potential of liquid oxygen absorbed into solid combustibles, delivering superior blasting power while minimizing environmental impact and operational costs.

    Unparalleled Blasting Power
    The explosive power and intensity of the liquid oxygen rock blasting system far exceed that of current mining explosives by a staggering 50-150%. This remarkable performance is achieved through the controlled combustion of liquid oxygen and solid combustible materials, generating a powerful and controlled explosion that effectively fractures even the toughest rock formations.

    Cost-Effective Solution
    One of the key advantages of the O₂ Rock Blasting System Technology is its cost-effectiveness. Compared to traditional ammonium nitrate explosives, the liquid oxygen rock blasting system offers significant cost savings, with prices as low as one-quarter of conventional methods. This economic advantage makes it an attractive choice for mining operations, quarrying, and construction projects seeking to optimize their budgets while maintaining high productivity.

    Enhanced Safety and Environmental Friendliness
    Safety and environmental sustainability are at the forefront of the O₂ Rock Blasting System Technology. By eliminating the use of hazardous explosives and relying on liquid oxygen as the primary blasting agent, this technology significantly reduces the risks associated with handling and transporting explosive materials. Moreover, the system's low pollution profile and minimal environmental impact make it an ideal choice for projects with stringent environmental regulations and a commitment to sustainable practices.

    Versatile and Adaptable
    The O₂ Rock Blasting System Technology is highly versatile and adaptable, suitable for a wide range of applications in the mining, quarrying, construction, and demolition industries. Its modular design allows for customization to meet specific project requirements, ensuring optimal performance and efficiency in various rock breaking and demolition scenarios.

    Key Components and Operation
    The O₂ Rock Blasting System Technology comprises three main components:

    Paper Splitting Tube (Consumable): This specialized tube is composed of a complex internal structure designed to ensure safe and effective rock blasting. The tube's diameter and length can be customized to accommodate different drilling bit sizes and project requirements.

    O₂ Filling Tank (Reusable): This tank is used to fill liquid oxygen into the paper splitting tube. With capacities ranging from 500kg to 2 tons, these tanks can be tailored to meet the specific needs of each project.

    Air Booster (Optional): An air booster can be incorporated into the system to increase the pressure of the liquid oxygen reloading process, enhancing the blasting effect for more demanding applications.

    The system's operation involves installing the paper splitting tube into the drilled hole, filling it with liquid oxygen from the filling tank, and initiating the controlled combustion process. This results in a rapid expansion of the gas, generating immense pressure that effectively fractures the rock formations.

    Conclusion
    The O₂ Rock Blasting System Technology represents a groundbreaking advancement in the rock breaking and demolition industry, offering a powerful, safe, and environmentally friendly solution. By leveraging the explosive potential of liquid oxygen and solid combustibles, this technology delivers unparalleled blasting power while minimizing environmental impact and operational costs. With its versatility, adaptability, and modular design, the O₂ Rock Blasting System Technology is poised to revolutionize the way we approach rock demolition projects, paving the way for a more sustainable and efficient future.
  • Diesel Fuel Hydraulic Rock Splitting Rods
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $9500-10500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Introduction
    At Gaea Rock, we are proud to present our advanced Hydraulic Rock Splitting Rod, a cutting-edge solution for precision rock breaking, demolition, and material separation across multiple industries. This innovative tool represents a significant leap forward in rock demolition technology, offering a safe, precise, and environmentally friendly alternative to traditional blasting methods.

    Technical Principle
    The Hydraulic Rock Splitting Rod harnesses the power of high-pressure hydraulic liquid to generate extraordinary splitting force. By carefully inserting the rod into a target object and applying controlled hydraulic pressure, the tool creates a powerful internal force that systematically breaks materials along predetermined fracture lines. This unique mechanism allows for unprecedented precision in rock breaking and demolition operations.

    Key Advantages
    Unparalleled Safety
    Unlike traditional explosive rock blasting methods, our Hydraulic Rock Splitting Rod eliminates the risks associated with explosives. The tool provides a controlled, predictable rock breaking process that significantly reduces operational hazards.

    Exceptional Precision
    Our advanced design enables operators to adjust force magnitude and direction with remarkable accuracy. This precision ensures minimal collateral damage to surrounding structures and environments during rock demolition projects.

    Environmental Sustainability
    Gaea Rock's Hydraulic Rock Splitting Rod produces zero harmful emissions, making it an eco-friendly solution for rock breaking and demolition. The technology aligns perfectly with sustainable development principles, reducing environmental impact compared to traditional blasting techniques.

    Comprehensive Application Fields
    Mining Engineering
    Stone crushing and processing
    Rock separation and extraction
    Precise mineral extraction operations
    Construction Engineering
    Controlled demolition of concrete structures
    Precise wall and bridge deconstruction
    Infrastructure modification projects
    Demolition Engineering
    Removal of concrete pavements
    Sewer and infrastructure deconstruction
    Urban renewal and reconstruction projects
    Rock Engineering
    Rock embrittlement techniques
    Crack expansion and controlled fracturing
    Geological investigation and manipulation
    Innovative Technologies
    Intelligent Control System Our latest Hydraulic Rock Splitting Rod integrates advanced sensors and intelligent controllers, enabling:
    Automated operation monitoring
    Real-time performance tracking
    Enhanced operational safety and efficiency
    Lightweight Ergonomic Design Utilizing cutting-edge materials and structural innovations, our rock splitting rod offers:
    Reduced operational weight
    Improved portability
    Enhanced user comfort and maneuverability
    Energy-Efficient Technology Gaea Rock's commitment to sustainability is reflected in:
    Low-noise hydraulic systems
    Reduced energy consumption
    Minimized environmental footprint
    Conclusion
    The Gaea Rock Hydraulic Rock Splitting Rod represents a paradigm shift in rock breaking and demolition technology. By combining advanced hydraulic engineering, intelligent design, and a commitment to safety and sustainability, we have created a tool that exceeds industry standards and opens new possibilities in rock demolition and material separation.

    Our innovative approach ensures that professionals across mining, construction, and demolition industries can achieve their objectives with unprecedented precision, safety, and environmental responsibility.

    Experience the future of rock breaking with Gaea Rock's Hydraulic Rock Splitting Rod – where technology meets innovation.
  • Electric Power Rock Splitter Machine Hydraulic Rock Splitter Rod
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $9500-10500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Electric Hydraulic Rock Splitter Operating Instructions
    Introduction
    The electric hydraulic rock splitter, proudly manufactured and distributed by Yantai Gaea, represents a revolutionary advancement in rock-breaking technology. Combining the immense power of hydraulic force with the convenience and environmental benefits of electric power, our splitter is the ideal choice for mining, construction, and civil engineering applications where reliable and efficient rock breaking is required.
    Product Overview
    Our electric hydraulic rock splitter consists of two main components: a hydraulic pump station and a splitting rod. The splitting rod is driven by high-pressure oil from the pump station, which activates a cylinder to generate substantial driving force. After mechanical amplification, this force allows the object to be split in a predetermined direction with precision and efficiency.
    Advantages of the Electric Hydraulic Rock Splitter
    Powerful Performance: Capable of splitting rocks in approximately 5-12 seconds, significantly increasing productivity.
    1.Environmental Benefits: Electric power eliminates emissions associated with fossil fuels, offering a cleaner operation.
    2.Safety: Incorporates advanced safety features such as safety interlocks, emergency stop functions, and protective guards.
    3.Low Noise Emissions: Electric motors contribute to a quieter and more comfortable working environment.
    4.Versatility: Suitable for silent mining of various hard rocks, including granite, volcanic rock, quartzite, basalt, sandstone, limestone, marble, dolomite, and more.
    Operating Steps
    1.Prepare the Free Surface:
    Before splitting, a free surface (also known as a volley surface) must be created.
    Methods include drilling oblique holes or using a core drilling machine.
    2.Drilling Holes:
    Drill holes on the side of the free surface where splitting is desired.
    Use a drilling machine to create holes with a diameter suitable for the splitting rod (commonly 120mm) and a depth of at least 1.2 meters.
    3.Insert the Splitting Rod:
    Fully insert the hydraulic splitting rod into each drilled hole, ensuring proper placement.
    4.Connect Hydraulic Hoses:
    Attach the high-pressure oil hoses to the splitting rod.
    Hoses are color-coded: blue for high-pressure and black for low-pressure.
    5.Fill Hydraulic Pump Station:
    Add anti-wear hydraulic oil to the pump station, filling it to the required level as indicated by the dipstick.
    6.Power Connection:
    Connect the hydraulic pump station to a three-phase four-wire 380V power supply.
    Ensure the motor rotates clockwise (forward rotation).
    7.Activate Splitting Process:
    Start the power supply.
    Shift the manual directional valve towards the blue high-pressure hose to initiate oil flow.
    The splitting rod extends, generating force towards the free surface, causing the rock to split.
    8.Monitor Pressure:
    Observe the hydraulic oil gauge until it reaches 120 MPa.
    At this point, the hydraulic station stops and holds pressure, indicating the splitting process is complete.
    9.Retract and Remove Splitting Rod:
    Shift the manual directional valve towards the black low-pressure hose to retract the rod.
    Manually remove the splitting rod from the hole.
    10.Repeat as Necessary:
    Continue the process for each hole to achieve the desired rock fragmentation.
    Safety Precautions
    Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection.
    Ensure all connections are secure before operating the equipment.
    Keep bystanders at a safe distance during operation.
    Regularly inspect equipment for signs of wear or damage.
    Customer Support and Service
    At Yantai Gaea, customer satisfaction is our top priority. We provide comprehensive after-sales support, including:
    Installation Assistance: Our technical team can guide you through the setup process.
    Training: We offer training sessions to ensure safe and effective use of the equipment.
    Maintenance and Troubleshooting: Our experts are available to help maintain optimal performance.
    Spare Parts Availability: We maintain an inventory of spare parts to minimize downtime.
    Conclusion
    The electric hydraulic rock splitter by Yantai Gaea offers a breakthrough solution for efficient and environmentally friendly rock breaking. With its robust construction, exceptional performance, and safety features, it stands out as a reliable tool in mining, construction, and civil engineering projects.
    Contact Us

    For detailed information, technical specifications, or personalized assistance, please do not hesitate to contact us. We are dedicated to meeting your specific requirements and exceeding your expectations.
  • CO2 Rock Demolition System Rock Blasting Technology
    favorites
    Add To Compare

    Type: Stone Quarry MachinesQuarry Hydro-Bags, Rock SplitterHydraulic Rock Splitter

    $25000-30000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    CO2 Rock Demolition: A Revolutionary Approach to Rock Blasting
    Introduction
    CO2 rock demolition is an innovative technology that offers a safe and efficient alternative to traditional explosive rock blasting methods. By utilizing the expansive properties of liquid carbon dioxide, this method achieves effective rock fragmentation without the associated risks and environmental concerns of conventional explosives.
    The Need for a Safer Rock Blasting Method
    Traditional explosive rock blasting has long been associated with major safety hazards, including gas explosions, structural damage, and environmental pollution. Explosive blasting can generate powerful shockwaves (exceeding 1000-5000 MPa) that cause significant vibrations, potentially leading to accidents such as building collapses, transmission line destruction, and even loss of life. Moreover, explosive rock blasting can trigger secondary disasters like gas outbursts, water inrushes, and induced seismic activities.
    Principles of CO2 Rock Demolition
    CO2 rock demolition technology harnesses the rapid expansion of liquid carbon dioxide when it transitions from a liquid to a gaseous state upon sudden heating. This process generates a strong but controlled impact force (approximately 200-400 MPa) that fractures the rock. The expansion is slower compared to explosive rock blasting, with detonation velocities around 3 m/s, significantly reducing vibrations and the risk of collateral damage.
    Advantages of CO2 Rock Demolition Over Traditional Rock Blasting
    1.Enhanced Safety
    Non-Explosive Process: CO2 rock demolition is an endothermic reaction that absorbs heat, reducing the risk of igniting combustible gases or causing explosions.
    Reduced Vibration and Noise: The lower impact force and slower expansion minimize vibrations and noise pollution, protecting nearby structures and environments.
    No Harmful Byproducts: The process emits only gaseous carbon dioxide, an inert gas, eliminating the production of toxic gases associated with explosive rock blasting.
    2.Environmental Friendliness
    Utilization of Industrial CO2: This technology repurposes carbon dioxide, often a waste product from industrial processes, contributing to waste reduction.
    Minimized Environmental Impact: With less dust, noise, and vibrations, CO2 rock demolition is more environmentally friendly than traditional rock blasting methods.
    3.Operational Efficiency
    Controlled Rock Blasting: Allows for precise rock fragmentation, improving operational efficiency and reducing the risk of over-break.
    Scalable Application: Suitable for various projects, including open-pit mining, road construction, tunnel excavation, and underwater blasting.
    4.Cost-Effectiveness
    Lower Overall Costs: Reduces the expenses associated with safety measures, environmental remediation, and anti-terrorism concerns inherent in explosive rock blasting.
    Ease of Transportation and Storage: Liquid CO₂ is easier and safer to transport and store compared to explosives.
    Applications of CO2 Rock Demolition
    CO2 rock demolition technology is versatile and can be applied in numerous rock blasting scenarios:
    Mining and Quarrying: Efficiently breaks rock formations without the hazards of traditional explosives.
    Construction Projects: Ideal for foundation excavation, trenching, and demolition in urban areas where vibrations must be minimized.
    Tunnel Excavation: Enhances safety in tunneling operations by reducing the risk of gas explosions and structural damage.
    Underwater Rock Blasting: Suitable for dredging and underwater construction where explosive use is restricted.
    Conclusion
    CO2 rock demolition represents a significant advancement in rock blasting technology, offering a safer, more environmentally friendly, and efficient alternative to traditional explosive methods. By embracing this innovative approach, industries can enhance safety, reduce environmental impact, and improve operational efficiency in rock blasting applications.
    Experience the Future of Rock Blasting with CO2 Rock Demolition Technology
    Adopting CO2 rock demolition technology transforms the way we approach rock blasting. Its numerous advantages over traditional methods make it the ideal choice for modern engineering and mining projects seeking safety and efficiency.

Have a Question? Ask our expert

FAQ icon
Ask now

Questions & Answers on Quartzite Quarry Hydro-Bags, Rock Splitter

What is Quarry Hydro-Bags maximum thrust force?

Posted by Visitor

reply icon Reply to this question

1Reply
Post ReplyCancel

The hydro bags expand under the pressure of water pumped at 30-40 bar, permitting a maximum dilatation of 25-30 cm (approx. 1’) and a thrust force up to 1000 tons. Couple two or more cushions to obtain higher performances; side by side or combined together in packs.

Answered by StoneContact

Like

What is the average size of hydro bags?

Posted by Visitor

reply icon Reply to this question

1Reply
Post ReplyCancel

Its average dimensions vary from 500*500 mm to 2300*2300 mm.

Answered by StoneContact

Like

What are the average weights of Quarry Hydro-Bags?

Posted by Visitor

reply icon Reply to this question

1Reply
Post ReplyCancel

Quarry Hydro-Bags average weight vary from 3 kg to 15 kg.

Answered by StoneContact

Like

How do quarry rock splitters work?

Posted by Visitor

reply icon Reply to this question

1Reply
Post ReplyCancel

The working principle of quarry rock splitter is based on two counter wedges inserted in a pre-drilled hole. A hydraulic cylinder pushes out a centre wedge between the counter wedges to spread them apart and the rock is forced to crack.

Answered by StoneContact

Like

Clear All
Compare (0/4)
StoneContact
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!