Granite Multi Wire Saw Machine in Turkey

Every wire control with special hydraulic system wtih special sensor; it is control cutting speed with PLC and also you can see all the details life of the wires e.t.c from the touch screen and control your machine from your computer.
Number of wire : 5-10-20-34-40-72 Pieces
Cutting Thickness : Variable 2-3-4-5-6-7-8-9 cm....

Karann Multi Wire Saw Machine
Our different machine models between 10-36 wires
Made by Turkey
There are 3 different versions of our machine
5 wire 2 cm slabs
10 wire min 5 cm slabs (for thick stone with separate hoops each)
36 wire 2 cm slabs

SCHINDMACHINES SMW10 MULTI WIRE GRANITE & MARBLE BLOCK CUTTING MACHINE
Natural stone block cutting machines have gained a quite different level with the latest technology. Wire gang saw or, in other words, multi wire block cutting machine, has become the first need of factories.
Schind has succeeded in being a solution partner for cutting granite blocks or cutting marble and travertine blocks for manufacturers who want fast production.
Thanks to its strong chassis structure and separately pneumatic wire tensioning, you can cut plates of different thicknesses with high precision.
We proud of to say we have high demands received for the Schind multi wire gang saw that we have developed in-house from the domestic and international markets.
Supporting the cutting group with a hydraulic cylinder has increased the life of the system 5 times by reducing the load on the nuts and reducer system to 10% during the up and down movement of the machine.
Linear rays are completely protected by bellows.
With our SCHIND SMW10, SCHIND SMW15, SCHIND SMW38 models, we have succeeded in being the supplier of manufacturers who make slabs from block with these cutting-edge multi-diamond wire block cutting machines. With this diamond wire stone cutting technology, we succeeded in overcoming difficulties such as precision in multi-plate cutting, ability to move independently of the vein structure of the stone, and faster product removal with less breaking from the gang saw.
The cost of diamond wires is around 30% more than that of the saw blades. These values ​​may differ depending on the type of stone and the quality of the diamond wire.
Based on the same number of blades and wires, multi-wire cuts 3 times faster than the gangsaw blades.
Minimum slab thickness is 18 mm at lamella gangsaw block cutting machine. Minimum slab thickness is 8 mm thin with the shifting technique in the multi-wire block cutting machine.
Since the lamellar gang saw works with back and forth movement, it makes a hydraulic impact to the stone block and the cracked stone slabs can be easily broken. This does not happen in multi-wire gangsaw, the stone is cut without impact.
If we explain mathematically so that our customers can make correct calculations and compare the machines;
The energy consumption of the Multiple Wire Block Cutting machine is 110 KW.
Let’s say our block is 3 meters. Cutting speed is 60 cm/hour.
3mt x 0.6 = 1.8 m² x 44 diamond wires then we can get max = 79.2 m² / hour
110 Kw / 79.2 m² = 1.38 Kw / hour / m²
The energy consumption of the 80 Blades Gang-Saw Block Cutting Machine is 160 Kw.
Let’s say our block is 3 meters. Cutting speed is 20 cm/hour.
3mt x 0.2 = 0.6 m² x 80 = 48 m² / hour
160 Kw / 48 m² = 3.33 Kw / hour / m²
Result: We spend 1.38 Kw/hour cutting 1 m² of plate with diamond wire block cutting method… We spend 3.33 Kw/hour when cutting 1 m² with a gang saw block cutting method …

Simple and Strong Structure: Özteknik multiwire machine has an open frame structure which is both strong and functional. All parts undergo thorough structural checks with the aid of Computer Aided Engineering (CAE) software. Two columns are robustly fixed to foundation and one connecting transversal beam that have been built with wide closed section in large thickness normalized steel work. The weight on nuts, which are caused by the effect of the operational elements connected to sliders, are supported with N2 pistons in the columns. Utilizing two columns makes accessing the machine very convenient. The wires can be replaced or moved to obtain different thickness requirements very quickly and smoothly as the machine can be easily accessible from all sides.
Low Maintenance Cost: Özteknik multiwire cutting machine possesses low operating and maintenance costs and our company ensures the delivery of spare parts to meet the needs of the user at reasonable prices. Due to the design practices employed during the

TOKSEL MULTIWIRE BLOCK-CUTTING MACHINE: MEGALODON
Megalodon which offers various wire thickness options, is first launched with 5.3mm. wires in İstanbul Marbletech fair. Thin wires provide high cutting speed and less waste of raw materials. The precision cut feature of the machine transforms raw stones in the quarries into high value added products.
With hot-dip-galvanizing and epoxy paint MEGALODON is firm in any condition. It has TOKSEL’s traditional all-over-auto lube system as well.
Compared gangsaw machines, Megalodon allows changing thickness settings more practically when needed. You can produce from 15 to 65 cm. slabs, now with much higher performance with Megalodon.
Industrial Advantages of MEGALODON
High cutting speed
Minimum waste of raw materials
Lower foundation expenses
Less space
Cuts both marble and granite
Energy saving up to 25%
Less need for workforce
Able to cut slabs