Quartzite Monolama Cutting Machine

The single blade machine is perfectly suitable for squaring marble blocks or cut big thickness slabs, installing one diamond blade. The machine is supplied with a fixed trolley for the blocks, in order to cut big thickness slabs; otherwise the machine is supplied with a rotating bench trolley, in order to square the marble blocks.

The operation of the machine is by a combined hydraulic and mechanical movements, which allows the best tensioning and movement of the blade, in order to raise the speed of cut and guarantee the best precision. On the BM Super model, the diamond blade has a linear stroke of 420 mm, on the BM Super 800 the diamond blade has a linear stroke of 800 mm.

They install the same motor, so with the same electrical consumption, the 800 mm model guarantee a higher cutting speed (downfeed) and so a bigger production.

800 mm STROKE

For greater production and lower consumption of diamond segments. It is ideal for defective and abrasive materials.Sprinkling system

The newly concivied water sprinkler ensures better distribution of the water over the sawing area.

Cooling system.

A new closed circuit cooling system using non recycled water to increase the life of the pistons and gaskets.

Automatic cutting programmer displayed on touchscreen, controlled by PLC.

Reasons for choosing BM SUPER over a monofil for sawing marble:

•Minor sawing costs as diamond blades are cheaper than diamond wires.

• Higher output – in square metres – with the diamond blade than with the diamond wire.

• Greater cutting precision.

• Optimal sawing speed to quality ratio.

• Less waste of material when squaring blocks.

• An extra 6 mm for every cut because diamond blades are thinner.

• Smaller investment costs of the machine.

• Inferior sawing time on blocks with small dimensions.

The machine adopts an advanced hydraulic tension device which is stable and reliable so that the blade is always in the best tightening state whilst maintaining high cutting precision and efficiency. Equipped with automatic walking and rotating material trolleys and Siemens PLC touch screen, the machine can work automatically and can cut the blocks precisely.
It is mainly used for the finishing of marble blocks, which can greatly facilitate the follow-up cutting, save costs, and improve the slab production rate.

The NARROW BELT BLOCK SAWS are full capacity production machines suitable for any
company small or large, with sizes to fit your individual requirements. Most saws are traveling
gantry machines which run on a fabricated steel track. The saws are designed to be size
efficient requiring a minimum amount of building space while delivering the maximum amount of
cutting capacity. All sizes of saws can be furnished as stationary units upon request by customer.
THE NARROW BELT SAWS ARE AVAILABLE IN THE FOLLOWING SIZES:
Capacity
(Max. Block Size)
Wide x High
Style Number
Overall Gantry Saw
Dimensions
Width x Height x Depth
Center to Center
of Tracks
9'-0 x 4'-3 (D5)
G9x4D5-50/5H/1/5
20'-9" x 12'-9" x 8'-8"
11'-0"
11'-0 x 6'-3 (D5)
G11x6D5-50/5H/1/5
27'-6" x 17'-0" x 8'-8"
13'-0"
11'-0 x 7'-3 (D5)
G11x7D5-75/5H/1/5
27'-6" x 19'-2" x 9'-3"
13'-0"
14'-0 x 7'-3 (D5)
G14x7D5-75/5H/1/5
31'-0" x 19'-2" x 9'-3"
16'-6 1/2"

The structure of machine is made up of two high quality steel columns and a cross beam, to ensure maximum stability during sawing. Sawing is done by a combined mechanical and hydraulic movement transforming the mechanical movement into a hydraulic one to obtain optimal tensioning, precise and regular sawing of block.
The hydraulic tensioning of blade is continuously maintained by electronic instruments fitted in control panel. The machine is supplied with fixed table trolley / rotating table trolley. The trolley runs on two flat and two prismatic wheels to ensure their precise displacement. The movement of trolley is governed by control panel. The machine is fully automatic and all safety factors are incorporated in the control panel. Once in operation, the machine does not require continuous presence of operator.

Versatile gangsaw both for squaring marble blocks and for sawing blocks in thick pieces, using a single diamond blade. The structure of the single-blade, in sturdy tubular carpentry, consists of two uprights and an upper cross connection. The blade movement is performed by a combined mechanical and hydraulic system. The tensioning unit is hydraulic and guarantees a homogeneous tension on the whole blade, assuring an excellent cutting precision.
Marble, Block, Blocks, Single blade, sawing