Granite

Bridge Saw-Gamma

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Bridge saw Gamma suited for processing sandstone, limestone, marble and granite. Peripherical speed steplessly regulated by frequency regulator Programmation: For fully automatic sawing, PLC with operator panel which is suited for adjusting; One strip width The number of strips The loss due to sawing The saw head can be rotated in vertical plane (mitre) 0, 45 and 90 degrees and in horizontal plane 90 degrees. There is also a possibility for profiling; with the use of a scan table a drawing is sc

Portable Single Arm Built up Saw

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

This machine works fully manual, the special design of this machine allows to move it where ever we want. We can move the table manual, the disk moves also manual, and we can move up and down, toward and backward.

Gpw-218 Wet Air Polisher / Sander (5000rpm)

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

Low vibrate and noise with excellent performance. Gravity casting housing carries long duration of tool. Centre water feed function reduces dust, and improves environment protection. Water valve can be adjusted for variable water-flow. Includes a reversible side handle, exhaust muffler, air hose adapter and water valve with hose adapter. Both 3" and 4" pads are available. Light weight and compactable design are also suitable for single-hand operation. Rubber sleeve keeps hands from getting cold.

Polywire 5/34 Stationary multiple diamond wire saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stationary multiple diamond wire saw to cut up to 34 slabs at the same time. Complete with a PLC and CNC system.

Benetti TL 920 Quarry Wire Saw Machine

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

TL 920 is a machine with powerful chassis. With compact and simple operation and maintenance, it rotates electrically around its axis and can cut at any angle. A separate panel for movement and automation, 10 m distance from the main machine ensures operator's safety. The start is made through star / delta, the promotion with motor of controlled speed while it has a kit of keys and 2 exemption's pulleys.

Brazing Machine for Core Drill

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Artificial Stone, Basalt

Machinery Function Features:

Brazing Machine for Core Drill Copper Solder Brazing (87% Cost saving from Silver Solder) Fully Automatic Process Minimized tolerance against heat transformation

Filter Press - Water Filtration System

Type: Stone Factory Machines › Stone Factory Cleaning Equipments › Water Treatment Equipment

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

Water Purification, Filtering and Decanting Muds: FILTER PRESS series PC - Made in Italy

SPL COMPACTLINE - PROFILING MACHINE

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Profiling Line Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SPL is the new profiling machine suitable to create different profiles on the edge of porcelain, marble and granit material.

Simec DECO-NET - System for distributing reinforcing mat

Type: Stone Factory Machines › Resin Line Machines › Stone Reinforcement Net Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Automatic distributors of reinforcing net for tiles or slabs

WYMJ-4000 Horizontal Column Polishing&Cutting Machine

$14,500 - $15,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Balustrade Lathe Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

Function：The machine is designed to process column base&cup, solid columns, Roman column, tapered column and arc slabs.

Giant Disc Bridge Saw Machine - Masterline Series

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Bridge Saws Machinery - Masterline Series MASTERLINE BS/FH saw diameter from 2000 to 3500 mm; suitable for blocks of 3500 x 1500 mm, up to a height of 1550 mm; adjustable height via two pillars; timer for automatic step cutting; guide for saw blade holder made from ultra durable steel; block wagon for loads op to 25,000 kg; PLC control; automatic execution of sawing assignments; program for adjusting the block length;

MLC/6 - EDGE POLISHING MACHINE

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Machine to polish and bevel the edge of marble, granite, agglomerates. It is made of 4 polishing spindles and 2 spindles at 45° for chamfering. The spindles have a higher power and they are able to mount any tool, both abrasive and diamond ones. The water injection comes from the centre of tool for a better efficiency. All spindles have a pneumatic control, driven by P.L.C.

Gpw-7 Wet Air Polisher / Sander (4500rpm)

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

Low vibrate and noise with excellent performance. Gravity casting housing carries long duration of tool. 3-section-shifting knob enables user to adjust frequency of air for reducing free speed. Section 1. 700 rpm, <0.1HP Section 2. 3800 rpm, 0.25 HP Section 3. 4500 rpm, 0.43 HP Centre water feed function reduces dust, and improves environment protection. Water valve can be adjusted for variable water-flow. Includes a reversible side handle, exhaust muffler, air hose adapter and water valve with

Simec VU 2200 -Resin Line Vacuum station- Vacuum Resin-Treating Plants

Type: Stone Factory Machines › Resin Line Machines › Vacuum Resin-Treating Plants

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

These machines facilitate the penetration of the resin, previously deposited on the surface of the slabs, into the micro-cracks and pores. The process is achieved by housing the slab in a vacuum chamber.

Polywire 20 Multiwire saw Blocks Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Multiwire saw with a big multi-groove drum (2.35 mt diameter) on the motor side and twenty big independent tensioning flywheels (2 mt in diameter), each tensioned by the patented Multipull system to manage at best the cutting conditions and optimize the life of the diamond wires. The plant is complete with a multi-groove guide drum (0.6 mt diameter) on the tensioning side to ensure further cutting precision. The motor drum, the tensioning flywheels and the guide drum are covered with replaceable

Vacuum Sintering Press with Carbon Punches & Segment Assembly

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Sintering Press Vacuum Sintering with carbon punches & segment assembly Precise control of pressure & temperature Option: Automatic loading & unloading device with servo control

Cross Cutting Machine 1

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

This machine is automatic. It is used to cut boards into a certain size. It is compact in structure, stable in performance, convenient in installation, operation and maintenance. Disk diameter: 400-500 mm Thickness of slab to be processed: 80 mm Useful cutting width: 650 mm Main motor power: 6 kw One Gearbox to move the Head of the disk: 0.75 kw One brakes Gearbox: 0.5 kw General power: 7.25 kw Overall dimensions (LxWxH): 3000x1400x2100 mm

Benetti Gamma 875 Quarry Wire Saw Machine

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Strong, compact and easy to use machine, manufactured with a special steel frame connected to the flywheel rotation group. It is designed to perform large primary cuts and block squaring on marble, granite and abrasive stones. The model with vectorial inverter control system allows to vary the diamond wire speed from 0 to 40 m/sec. The machine moves on rails by means of rack/pinion system. The feed system consists of a super card device, that allows a constant tension and control of the diamond

YMJ-2000(I//II)Automatic Column-cutting&Polishing Machine

$14,500 - $15,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Arc Slab Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

Main Technical Parameters Diameter of Blade：Φ600mm Process arc slab size：（Φ400-Φ2000 mm）×1500mm(H) Overall Dimensions: 4500mm(length)×3000mm(width)×3500mm(height) Total Power: 12.75kw Total Weight: 4.8t Function： The machine is used for processing column base&cup，cutting and polishing arc slab& solid column. Also can trim up-down edge of arc slab.

AXIA 38 TS3 Automatic CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

AUTOMATIC ELECTRONIC BRIDGE SAWING MACHINE Large machine ideal for small,medium and large companies for cutting stone, marble and granite, both in manual and automatic cycle. This machine also performs complex profiles and shapes on a very large cutting surface. Max blade size of 1050 mm (41.3 in) - 1200 mm (47.2 in) optional. Machine built in cast iron and protection covers in stainless steel. The standard machine is supplied with the following: - motorized tilting and programmable head for mar

Benetti CSM 962 Chain Saw Machine vertical and horizontal cuts in limestone, marble, and travertine

Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

The Benetti's chain saw model CSM 962 is an extremely robust design machine, which can perform primary vertical and horizontal cuts in limestone, marble, and travertine, even in dry conditions. All movements of the machine are controlled by means of reversible hydraulic transmissions systems, which allow a continuous speed adjustment.

Gpw-A02a 90 Degree Edge Wet Air Polisher

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

Fix the clamp width and avoid overtightening when facilitates moving. Polishing Depth Control (Max. 5mm): Enable to adjust / control the polishing depth, to avoid over-polishing which may cause uneven surface on the workpiece. 18 rolling wheels to facilitate moving. Designed to fit various GISON's sanders / polishers /grinders, simply by changing the clamp. Quick change the abrasive / polishing pad while working. GPW-A02 90 degree edge polishing auxiliary base is used together with GISON's wet a

POLYONE Multiwire Marble, Granite Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

A unique and patented feature of the POLYONE series consists of a special wire winding geometry that allows two cuts in the block for each diamond wire. With the POLYONE 20 version it is therefore possible to obtain 20 cuts in the block with 10 wires to realize 1 cm thicknesses, 14 cuts of 2 cm with 7 wires, and 10 cuts of 3 cm with 5 wires. The compactness of the machine and its geometry allow a minimum need of manpower for the management of the wires, an optimized use of the diamond wire for e

GENIUS ONE - System for the drying and catalysis of blocks to be reinforced

Type: Stone Factory Machines › Resin Line Machines › Stone Drying, Catalysing Oven

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

System for the drying and catalysis of blocks to be reinforced

MVB/4 AMINEUS - Automatic Machine for Kitchen and Bathroom Tops, Steps, Bullnose profiling

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The new MVB/4 is an automatic machine able to carry out both the cutting and the profiling of skirting pieces, doorsteps and window sills, with bullnose and half bullnose edges, in a single passage and with just one movement of the piece. Alternatively, it can make45° mitering for production of kitchen and bathroom top and steps. MVB/4 makes the production of high quality elements possible on ceramic, gres porcelain, marble, granite and agglomerate materials, in a fast and simple way, with just

Gravimetric Cold Press-Automatic Cold Press Machine for Stone Tools

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Gravimetric Cold Press-Automatic Cold Press for Stone Tools Automatic Cold Press Automatic Dosing & Charging

YFJ-2000 Column Bases&Crowns Profiling&Cutting Automatic Mac

$11,000 - $11,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Balustrade Lathe Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

Function： The machine is designed to process column base&cup

Edges Polishing Machines-Super Pro

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

The automatic controlled edge polishing machine Super pro is suited for sawing, milling and polishing edges of marble and granite materials. The machine is equipped with facet units, which makes processing under angle possible. Number of units 8+2+2 Processing grinding/ polishing and optional sawing/ polishing Units 8x horizontal, 2+2 facet Head hor. unit 130 - 150 mm Polishing facet at top 2 x 45 degrees Polishing facet at bottom 2 x 45 degrees Head facet 130 mm Slab thickness till 100 mm Table

5.mini-column cutting machine

$4,000 - $5,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Balustrade Lathe Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

5.mini-column cutting machine The machine is designed to process the baluster into the shape of a vase.

Block carriages

Type: Stone Factory Machines › Stone Handling, Loading Machines › Block Turnover-Tilting Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Standard block carriages on railway for any use. Used with single and multiple wire diamond wire saws, for 40 or 60 ton blocks.

Benetti Tunnel Jet Belt 940 Diamond Belt Chain Saw Machine

Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sin

MRC - Bevelling, Rectifying Machine for marble, granite, gres porcelain

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Leveling Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

MRC is an automatic machine designed to finish the edge of squared or rectangular material and to bevel the upper edge. It is ideal for marble, granite, gres porcelain, single and double firing, agglomerates and brick.

Gpw-4500 Stone Engraving Air Hammer (4500bpm)

Type: Stone Hand Held Machines › Hand Held Carving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

With a Tungsten Steel Chisel Light Weight Built-in Regulator Adjustable Direction for Air Exhaust Shock Absorbance by Spring with percussion strength control, very precise single-percussion control Ideal hammer for all lettering and ornamental works. Used for fine masonry work like chopping scripts out of stones.

SIMEC 1 INT/0 - Single-disc cross-cutting machine for strips

Type: Stone Factory Machines › Stone Tile Cutting Machines › Single Disc Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The 1 INT/0 boasts the quality of solidity, precision and cutting capacity of SIMEC’s products but its characteristic is the non-automatic running of work. With the 1 INT/O the operator manually and easily selects the cutting dimension to be done with the help of different stop bars and starts the run of the motorized spindle.

Bridge Saw-Sigma

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Bridge saw Sigma is suited for processing sandstone, limestone, marble and granite. The CNC version has the possibility for profiling; linear, convex and concave. Peripherical speed: steplessly regulated by frequency regulator. Programmation: For fully automatic sawing, PLC with operator panel which is suited for adjusting; One strip width The number of strips The loss due to sawing CNC control consisting of: Drawing table 1.5 x 1.0 mtr complete with foot, drawing machine and digitizer CNC hardw

Circular griding and cutting machine /table making machine

$4,300 - $4,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

This machine adopt gantry structure, though motor drive disc rotating , use cylinder compress slab, first cut slab into round, then polishing edge. One time can finished,enhance efficiency. Parameter: Disc diameter: 1000mm Processing size: 500-1600mm Main motor power: 5.5kw Speed motor: 1.5kw Gross weight: 1300kg Full size: 2550X1200X1750mm

Benetti Super Jet Belt 950 Diamond belt Chain sawing machine for vertical-horizontal cuts

Type: Stone Quarry Machines › Stone Chain Saw Machines › Beam Chain Saw Machines

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Diamond belt sawing machine for vertical and horizontal cuts. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling. The system can really be considered “ecological”, because no grease or oil are used during the working phase, so that to prevent dust production and grease pollution. The SUPER JET BELT 950 is electric driven, with electronic control of speed and advance; it can cut up to 40

Gp-824lgr Air Die Grinder

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

Rear Exhaust, Safety Lever Composite Body, Light and Handy Low Run-out, High Stability

MVB/5 AMINEUS - Automatic Machine for Kitchen and Bathroom Tops, Steps, Bullnose profiling

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The new MVB/5 is an automatic machine able to carry out both the cutting and the profiling of skirting pieces, doorsteps and window sills, with bullnose and half bullnose edges, in a single passage and with just one movement of the piece. Alternatively, it can make45° mitering for production of kitchen and bathroom top and steps. MVB/5 makes the production of high quality elements possible on ceramic, gres porcelain, marble, granite and agglomerate materials, in a fast and simple way, with just

TRIMWIRE Mobile single wire saw for squaring and cutting thick slabs

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine. Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source. The machine is designed to be easily configured for transport from quarry to quarry on trailer. Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired