Post Your Needs
4355

Quartzite Limestone

(4,355)Have Prices
Special Shape Countertop- Table Top Edge Profiling, Polishing Machine

Special Shape Countertop- Table Top Edge Profiling, Polishing Machine

¥4,200 - ¥4,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite

Machinery Function Features:

Edge Profiling & Polishing in One Pass This machine completes the whole edge working process in one setup — rough grinding, fine grinding and mirror polishing. Operators can go from a raw cut slab edge to a smooth, glossy finished profile without moving the workpiece between different machines, saving time and handling cost for daily countertop production.

Sand Making Machine

Sand Making Machine

$19,500 - $20,000

Type: Stone Quarry Machines › Rock Crushers, Jaw Crushers

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Sand Making Machine takes one-time sand making process, eliminates the need for material return, offering high cost-effectiveness, large production capacity, and long hammerhead lifespan. The investment in fine crushers is 35%-50% lower than that of traditional equipment of the same scale. It is widely applicable to the fine crushing of various minerals such as granite, basalt, limestone, river pebbles, cement clinker, quartz, iron ore, and bauxite. Model: PXJ800*400 Feed Inlet: 400*185mm Maximu

5 Axis Stone Carving JTRF-6060-1D

5 Axis Stone Carving JTRF-6060-1D

$22,000 - $28,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Small vertical five-axis engraving machine, mainly making three-dimensional small pieces, granite, marble, foamed ceramics can be done, and finished products can be directly produced after finishing.

Dry Shot Blasting Sandblasting Machine For Concrete Pavers And Tiles

Dry Shot Blasting Sandblasting Machine For Concrete Pavers And Tiles

$5,000 - $8,000

Type: Artificial Stone Machines › Artificial Stone Polishing, Calibration Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Fully Dry Process, Zero Waste Water – Surface texturing is done by steel shot impact alone, so there is no water to recycle, no waste water to treat and no wet slabs to dry before packing – a cleaner, cheaper alternative to wet bush-hammering lines. Bush-Hammered Look At Higher Throughput – Four high-chromium cast iron blasting wheels throw shot at 65–70 m/s (4 × 250 kg/min) to reproduce a coarse bush-hammered finish on concrete interlocks, pavers and tiles, with far higher output and better uni

Thin Veneer Saw Stone Corner Cutting Machine For Marble Tile

Thin Veneer Saw Stone Corner Cutting Machine For Marble Tile

$19,000 - $22,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone

Machinery Function Features:

About This Machine This stone bridge saw is built for workshops that cut slabs every day. It handles granite, marble and engineered stone with the same setup, and its working area of 3200 x 2000 mm keeps full-size slabs comfortably inside the machine. The cutting depth reaches 480 mm, so both 20 mm tiles and thick countertop blanks are cut in one pass. What It Cuts Marble, Limestone, Granite, Quartzite, Sandstone slabs and tiles, countertops, stair treads, window sills and cladding panels. The b

Double Roll Rock Crusher

Double Roll Rock Crusher

$4,153

Type: Stone Quarry Machines › Rock Crushers, Jaw Crushers

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Model: 2PG400*250 Feed Size: <16mm Discharge Size: 2-5mm Capacity: 2.3-2.5m3/h Motor Power: 5.5kw*2 Dimensions: 2245*940*718mm Weight: 3600kg ............................................................................... Model: 2PG610*400 Feed Size: <36mm Discharge Size: 2-9mm Capacity: 3-9m3/h Motor Power: 11kw*2 Dimensions: 1785*2365*1415mm Weight: 3800kg ............................................................................... Model: 2PG750*500 Feed Size: <40mm Discharge Size: 2-10mm C

CNC Engraving Machine JT-1325-1D

CNC Engraving Machine JT-1325-1D

$9,000 - $10,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Bumblebee stone carving machine features a heavy-duty, rigid structure, is specifically designed for granite work, has a 7.5 kW main shaft, and an intelligent Weimong system. Its main functions include support for flat carving, relief processing, and hollow cutting. Essentially, it can handle any type of stone work, offering stability and efficiency.

Laminator Machine

Laminator Machine

$5,000 - $8,000

Type: Artificial Stone Machines › Printing, Decorating Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Laminator Machine Application: Used to laminate various protective films on flat plates, such as: metal plates, decorative boards, stone, wooden boards, glass, plastic rolls/plates, sheets, etc. Used for surface coating with decorative films (PVC, PET, etc.), decorative paper, kraft paper, etc., such as glass plates, metal panels, wooden boards, etc.; Used to press explosion-proof film on the surface of lenses, glass, etc.; Used for laminating and compacting sheets and coils after they are coate

Box Type High Pressure Filter Press 4930Mm 4Kw Slurry Treatment

Box Type High Pressure Filter Press 4930Mm 4Kw Slurry Treatment

$20,000 - $30,000

Type: Stone Factory Machines › Stone Handling, Loading Machines › Finishing, Cleaning Systems

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Product Overview This stone handling, loading machines is supplied by Quanzhou DAFON Machinery as a working production machine for stone workshops and quarries. It is configured to the buyer's own working size and voltage before shipment, and it is run from its own control panel. On this configuration: installed power 4 kw, machine weight 2100 Kg. How It Works The operator sets the working values on the machine panel, loads the workpiece, and the cycle runs without further adjustment. Feed and s

4+3 Monoblock Bridge Saw Machine For Marble Granite

4+3 Monoblock Bridge Saw Machine For Marble Granite

$12,000 - $20,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

4 AXIS BRIDGE SAW including milling head with suction and camera This series of models are suitable for slab, tile, marble, artificial stone, granite, cement products and other building materials of special-shaped edge or multi-function cutting, is the most for suitable specialcutting factory deep processing equipment 4+3 CNC bridge saw can achieve cutting of various shapes, we have added milling cutter with suction and camera on the basis of the 4-axis stone cutting machine, which can be profes

Stainless Steel Safety Cover For Stone Cutting / Wire Saw Machine

Stainless Steel Safety Cover For Stone Cutting / Wire Saw Machine

$100 - $247

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stainless Steel Water Cover for Stone Cutting Wire Saw Machine. Designed for use with stone cutting equipment, effectively prevent water splash and stone debris splashing, reduce cutting dust, protect operators and machine. Made of stainless steel, great sealing performance, excellent resistance to water erosion and stone‑chip abrasion, not easy to deform or crack for long‑term stable service. Remark: Other specifications are available upon request.

Stone Engraving CNC Router For Headstone Tombstone Lettering

Stone Engraving CNC Router For Headstone Tombstone Lettering

$8,100 - $11,900

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

About This Machine This stone bridge saw is built for workshops that cut slabs every day. It handles granite, marble and engineered stone with the same setup, and its working area of 3200 x 2000 mm keeps full-size slabs comfortably inside the machine. The cutting depth reaches 280 mm, so both 20 mm tiles and thick countertop blanks are cut in one pass. What It Cuts Granite, Marble, Limestone, Slate, Onyx, Travertine, Sandstone, Quartzite, Basalt, Artificial Stone slabs and tiles, countertops, st

5 Axis Stone Carving, Engraving Machine JTRF-3015-2D

5 Axis Stone Carving, Engraving Machine JTRF-3015-2D

$30,000 - $35,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Five-axis vertical engraving machine, which can support plane processing, lettering, relief, curved surface modeling and three-dimensional parts processing, is fully functional.

Jade Precious Stone Carving Machine

Jade Precious Stone Carving Machine

$6,500 - $8,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Small pendants, handicraft processing, tea trays, etc., to realize the automation of relief/engraving/hollowing out.

Stondeck Machine - Water‑Based Finishing Machine

Stondeck Machine - Water‑Based Finishing Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Waterjet Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone

Machinery Function Features:

The Stondeck is MAEMA’s patented water‑based finishing machine for natural stone, based on a controlled surface‑erosion process. It uses ultra‑high‑pressure water jets up to 2,000 bar (29,000 PSI) with a 40‑liter capacity, generating a wide range of decorative effects, from light textures to deep grooves. All components are fully hot‑dip galvanized and carefully finished to ensure long service life. The system relies on a next‑generation intensifier powering a patented multi‑nozzle rotating head

Heavy-Duty Stone Carving Machine

Heavy-Duty Stone Carving Machine

$33,000 - $38,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Multi-head circular carving machine, which can be used for batch processing, 360 solid parts processing, multiple materials loading at one time, fast speed and double efficiency, is suitable for processing a variety of stone materials.

5-Axis Intelligent CNC Bridge Saw Machine

5-Axis Intelligent CNC Bridge Saw Machine

$27,000 - $28,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

This machine is made of heavy materials, with a solid bed, which is durable and does not deform. The whole machine is processed by a large five-sided milling machine for guide rail surface and drilling. The key parts of the machine are imported high-quality accessories, with high processing precision, large production capacity and higher degree of automation. It adopts imported high-precision ball screw transmission, and the screw is highly heat-treated. The wear resistance is more durable and t

4 Axis CNC Bridge Cutting Machine

4 Axis CNC Bridge Cutting Machine

$15,700 - $15,850

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

This machine is made of heavy materials, with a solid bed, which is durable and does not deform. The whole machine is processed by a large five-sided milling machine for guide rail surface and drilling. The key parts of the machine are imported high-quality accessories, with high processing precision, large production capacity and higher degree of automation. It adopts imported high-precision ball screw transmission, and the screw is highly heat-treated. The wear resistance is more durable and t

Automatic 15-Head Multi-Function Straight Edge Stone Polishing Machine

Automatic 15-Head Multi-Function Straight Edge Stone Polishing Machine

$27,000 - $30,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Travertine

Machinery Function Features:

HLCM-15D 15-Head Multi-Function Straight Edge Stone Polishing Machine PLC Horizontal Edge Grinder | One-Pass Finish · Pneumatic Compensation · Replaces 15 Manual Workers The HLCM-15D is a heavy-duty PLC-controlled horizontal edge polishing machine for high-volume stone fabrication. It features 15 precision grinding heads, continuous conveyor feeding, and completes rough grinding, fine polishing, back grooving and R-radius forming in a single pass. Built with Taiwan Delta PLC, Schneider inverters

CNC Stone Carving, Engraving Machine

CNC Stone Carving, Engraving Machine

$11,500 - $13,600

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Bumblebee stone carving machine features a heavy-duty, rigid structure, is specifically designed for granite work, has a 7.5 kW main shaft, and an intelligent Weimong system. Its main functions include support for flat carving, relief processing, and hollow cutting. Essentially, it can handle any type of stone work, offering stability and efficiency.

Three-In-One Circular Carving Machine

Three-In-One Circular Carving Machine

$16,600 - $18,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

One engraving machine with three functions can be used for three purposes, such as plane engraving, lettering and relief, processing of three-dimensional parts, figurines, and thickening of stone materials, with multiple purposes.

Swing Head Stone Carving,Engraving Machine

Swing Head Stone Carving,Engraving Machine

$18,000 - $24,600

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stone edge profiling, stone chamfering, curved edge polishing, stone countertop processing, multi-angle head swinging and milling and polishing are integrated.

Three-In-One Circular Carving Machine

Three-In-One Circular Carving Machine

$17,800 - $21,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

One engraving machine with three functions can be used for three purposes, such as plane engraving, lettering and relief, processing of three-dimensional parts, figurines, and thickening of stone materials, with multiple purposes.

Vertical Rock Crusher

Vertical Rock Crusher

$4,615

Type: Stone Quarry Machines › Rock Crushers, Jaw Crushers

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

It is widely applicable to the fine crushing of raw and clinker materials in cement plants, as well as in the building materials and mining industries. It can also be used for the fine crushing of medium-hardness materials such as dolomite, coke, lead-zinc ore, serpentine, blast furnace slag, gangue, and phosphate rock. Model: PFL-600 Capacity: 5-10m3/h Feeding Particle Size: <100mm Discharge Material Size: <0-5mm Spindle Speed: 934r/min Motor Power: 15kw Dimensions(L*W*H)(mm): 1800*720*1600mm .

5 Axis Intelligent CNC Bridge Saw For Stone Cutting

5 Axis Intelligent CNC Bridge Saw For Stone Cutting

$25,350 - $25,500

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

This machine is made of heavy materials, with a solid bed, which is durable and does not deform. The whole machine is processed by a large five-sided milling machine for guide rail surface and drilling. The key parts of the machine are imported high-quality accessories, with high processing precision, large production capacity and higher degree of automation. It adopts imported high-precision ball screw transmission, and the screw is highly heat-treated. The wear resistance is more durable and t

NEWAlpha Awp-158 5" Wet Stone Polisher

Alpha Awp-158 5" Wet Stone Polisher

€278

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Our Price: $277.77 Shipping: Free Shipping Status: In Stock - Usually Ships in 24 Hours Condition: New Alpha AWP-158 5" Wet Stone Polisher Manufacturer: Alpha Tools PRODUCT FEATURES The the AWP-158 is a portable electric polisher designed for polishing, shaping, core drilling and light grinding. This 7.8 amp, 800-watt, 3,000 RPM machine is a powerful workhorse suitable for use in the shop or on the job site.The AWP-158 features several improvements over previous generations of polishers. In addi

Master Wholesale Inc.Master Wholesale Inc.United StatesUnited StatesContact Supplier
NEWAquajet - Cnc Waterjet Cutting Machine- CNC Working Center

Aquajet - Cnc Waterjet Cutting Machine- CNC Working Center

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Waterjet Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

In comparison to the other cutting technologies that have limitation in materials that can be processed with, waterjet cutting does not have such handicap. Water Jet cutting technology is applied for cutting extremely hard materials such as granite, titanium, bullet proof glass, but also very soft materials such as composites, sponge, foam, frozen food. One of the most important advantages that waterjet technology offers is very low energy amount added to the material, so there is no thermal tre

NEWElectrical Cranes- Jib Cranes

Electrical Cranes- Jib Cranes

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Crane

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Electrical cranes with continuous rotation through 270 degrees. Capacity up to 1000kg

P. Elenis Marble MachinesP. Elenis Marble MachinesGreeceGreeceContact Supplier
Let suppliers know exactly what you want to buy