Sandstone

SIMEC 1 INT/L - Single-disc cross-cutting machine for slabs

Type: Stone Factory Machines › Stone Slab Cutting Machines › Automatic Edge Trimming Line for Slabs

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This head-cutting machine for slabs with width up to 2200 mm. optimizes the polishing work, eliminating any possible abrasive waste and useless points due to the natural asymmetry of the slab. The 1INT/L can be equipped with different optional accessories as the 4,5-meter long motorized roller conveyor, the vertical pneumatic pressures and the waste unloading container.

Edges Polishing Machines-Marathon

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

The automatic edge polishing machine is suited for sawing, milling and polishing edges of marble and granite materials. The machine is equipped with facet units, which makes milling under angle possible. Number of units 6+2+1 Processing grinding and polishing, optional sawing and milling Units 6x horizontal and 2+1 facet Head 130 mm Polishing facet at top 2 x 45 degrees Polishing facet at bottom 1 x 45 degrees Head facet 100 mm Slab thickness up to 100 mm Table 3500 x 140 mm Motion driven

Circular Sawing Machines-Titaan

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

The Titaan is circular sawing machines which are suitable for sawing plates and slabs of marble and granite or comparable materials. Saw movement manual.

MTB/3 ANTIMUS BABY - Automatic Machine for Cutting and Edge Bevelling

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

AUTOMATIC MACHINE FOR CUTTING AND EDGE-BEVELLING MTB/3 ANTIMUS baby is the first and only compact, automatic machine able to cut and profile skirting pieces in a single passage! It is a revolutionary machine that meets the needs of ceramic, marble and stone laboratories, with small to medium productions. Until now such workshops either had to use two separate manual machines (one for cutting and one for edge-profiling) or rely upon external service companies, with an incredible loss of time. MTB

TRIMWIRE Mobile single wire saw for squaring and cutting thick slabs of marble and granite

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine. Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source. The machine is designed to be easily configured for transport from quarry to quarry on trailer. Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired

Monoblade Intertrade

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The structure of machine is made up of two high quality steel columns and a cross beam, to ensure maximum stability during sawing. Sawing is done by a combined mechanical and hydraulic movement transforming the mechanical movement into a hydraulic one to obtain optimal tensioning, precise and regular sawing of block. The hydraulic tensioning of blade is continuously maintained by electronic instruments fitted in control panel. The machine is supplied with fixed table trolley / rotating table tro

AT1 - Automatic single-disc cross-cutting machine for strips

Type: Stone Factory Machines › Stone Tile Cutting Machines › Single Disc Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This cross cutting machine for strips of width up to 650 mm has a very sturdy structure and boasts sophisticated electronics. With the AT 1 RX a sensor system recognizes the strip outline, the PLC which the machine is equipped with elaborates the information, choosing the right cutting positions and in such a way the presence of the operator is no longer necessary. Optional: double polarity motor for marble/granite.

V Voorden Portick Saws-HP 1/2

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Quarry Pneumatic and Hydraulic Drilling Machines

Type: Stone Quarry Machines › Quarry Drilling Machine › Pneumatic Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

TBC 90/2 HD-TBC 90/2 Heavy duty drilling machine for one or two hammers, with automatic thrust adjustment, air motor for travel on the rail and air oiler. can be used for both vertical and horizontal drilling.

Simec 210 INT - 350 INT - Transversal cutting machines for strips

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

These cutting machines, which are structurally identical, process strips up to a width of 620* mm. and thanks to their powerful motors, they cut in a single passage thicknesses up to 40 mm. on granite and 60 mm. on marble. The INT 350 cuts strips up to 3500 mm. long (2000 mm. for the INT 200 model), can mount up to 12 spindles (7 for the INT 200) and it is recommended in high productivity lines.

Dim-Net 3d Mixer for Any Kind Of Powder

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

3D Mixer for any kind of powder Fast & Uniform mixing machine for any kind of powder Rotation and Impact movement to plastic container 1 Liter & 10 Liter models are available

Sirma Stationary single diamond wire machine for squaring stone block, cutting slabs

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stationary single diamond wire machine for squaring stone block or cutting slabs of any thickness. Strong steel structure with two flywheels of 2.100mm diameter. Motorized tensioning system with automatic control for stable operation and the extends the wire life, minimizing the breakages. Optional inverter for driving speed wire between 10-44 m/sec. Motorized block carrying and rotating trolley controlled by inverter.

Benetti Arrow 715 Stationary Diamond Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stationary Diamond Wire Machine Model Arrow 715 for squaring and obtaining thick slabs from marble and granite blocks.Built with a stiff and strong structural steel frame, the machine is equipped with 2 big flywheels diameter mm 2000/ea. which facilitate the rotation of the diamond wire and prevent its fatigue.The machine is equipped with an inverter allowing the operator to vary the speed of the diamond wire from 0 to 40 m/sec.The tensioning of the diamond wire is obtained by means of a hydraul

DIABLO 72 Diamond Wire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Our slogan is "one shot, one block": the machine has been in fact designed allowing to process in one single drop the maximum commercial block loadable on a truck, suitable for very high production. The new plant is able to combine the flexibility shown so far in terms of various thicknesses achievable in the same drop and different materials allowed. The opened machine structure is in fact constituted of two columns as the other units of the same range, and this solution, together with presence

STRATOS 625 CNC Bridge Sawing CNC Machine with Rotating Head

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Numerical control bridge saw with 5 interpolated axes for cutting slabs of marble, granite and agglomerate up to 200mm thick by means of a disc with max. diameter of 625mm.

Bridge Saw BS1600

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

BS1600 is suitable for cutting sandstone, limestone, marble and granite. Peripheral speed can be adjusted using inverters Bridge Length 5 m Automatic height adjustment 1200 mm PLC to set: width of cut, cutting some strips, cutting waste

Simec SW 2000 High Performance Mutli-Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The multiwire SW is definitely innovative both in appearance and performance. It is a machine with a two-column structure made using top-class solutions and components in order to provide the highest reliability standards.

Double Top Multi Wire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Machine to cut slabs, for up to 2 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).

Pedrini Singlewire Jupiter GS200 Machine squaring marble and granite blocks and for thick cuts

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SINGLEWIRE JUPITER GS200 is an open frame single and two wires machine for squaring blocks of marble and granite and for thick cuts. The machine structure is made of two columns strongly fixed to foundations and one connecting transversal beam built in large thickness normalized steel work. Sliders vertical movement is driven through synchronized precision screws, coupled with nuts with anti_drop system and equipped with wear and tear control device. One slider supports both the main motor contr

Helios Circular Saw Bridge Type Giant Disc Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Sandstone, Travertine

Machinery Function Features:

The Helios Circular saw is for sawing square blocks and slate production out of sand stone, lime stone, marble en granite. With this machine you are able to produce automatically without operator. Blade diameter 600 1200 1600 2000 2500 2700 3000 3500mm Saw depth 210 450 630 800 1025 1125 1200 1450mm With stationary bridge and moveable saw car or Moveable bridge over rails Saw reach 1.2 x 2.0 m up to 5.5 x 7.0 m Saw car 5000 x 2500 mm 25 ton load capacity Suitable for fully automatic production

Gpw-A02b 90 Degree Edge Wet Air Polisher

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

GPW-A02B 90 degree edge polishing auxiliary base is used together with GISON's GPW-7/7L wet air sanders / polishers to accurately polish straight edges while keeping the slab flat on fabrication table. This new product will remove the guess work and inconsistency normally exist when fabricators polish stone edges with diamond polishing pads. It accepts maximum 4" back holder and 4" diamond polishing pads. Caution: Although the rollers for the base are made of nylon, it is possible that they may

Bidese Impianti- Poker CNC Diamond Wire Shaping and Squaring Block Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Developed Software which allows easy programming without requiring the presence of the operator during operation. The diamond wire operated motor which controls the inverter, for a change in the speed of the wire if needed. CAD-CAM allows to create the working file and to convert it in the machine language for the working execution.

Bridge Saw-BS900

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Bridge saw BS900 suited for processing sandstone, limestone, marble and granite. Peripherical speed: steplessly regulated by frequency regulator Bridge length 3.5 m Rise and fall 450 mm by means of short circuited motor Programmation: For fully automatic sawing, PLC with operator panel which is suited for adjusting; One strip width The number of strips The loss due to sawing The saw head can be rotated 90 degrees in horizontal plane, electrically driven. There is also a possibility for profiling

Simec SW 1200 High Performance Mutli-Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SW-1200 is a stationary multi-wire machine directly derived from the larger SW2000, with which it shares most of the technology solutions, but which is characterized by the useful cutting width reduced to 1200mm and for the smallest number of usable wires.

Polywire 20 Multiwire with 20 Wires Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Polywire 20 Multiwire with 20 wires to obtain slabs of different thicknesses in the same cut.. Multiwire saw with a big multi-groove drum (2.35 mt diameter) on the motor side and twenty big independent tensioning flywheels (2 mt in diameter), each tensioned by the patented Multipull system to manage at best the cutting conditions and optimize the life of the diamond wires. The plant is complete with a multi-groove guide drum (0.6 mt diameter) on the tensioning side to ensure further cutting prec

Saw Blade Brazing Machine

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Saw Blade Brazing Machine

Mach 700 Series Waterjet Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Waterjet Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Mach 700 Series Think Big The Mach 700 waterjet is the ideal cutting solution for heavy industry. Available with a dual bridge, the Mach 700 series is a large format waterjet designed for demanding environments and exacting expectations. The ideal combination of size, speed, and accuracy: make a big impact on your bottom line with the Mach 700. Sized for Production The Mach 700 excels in demanding, heavy industry environments. Cut large parts and heavy materials with ease, load and unload ef

Orion Water Jet Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Waterjet Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

The Orion Water Machine is suitable for cutting arbitrary shapes of marble, granite and similar materials. The machine is CNC controlled and consist of servo motors. System CNC servo system, including CAD / CAM software Materials marble, granite, ceramics and similar materials Bridge Type Bridge is movable on precision guidance. Height adjustment 200 mm, through actuator Optional: Abrasive cutter Nozzle 0.3 mm Water Treatment Installation Database module for data orders, customers, designs and m

Bidese Impianti-CNC Polar Junior Artistic diamond wire machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Polar Junior is made to cut the stone in various designs, for artistic purposes. Artistic diamond wire machine with vertical direction of the wire and a bench on which moves the material to be processed. Metal construction, which receives the appropriate heat and corrosion treatment. It is suitable to any working situation.

SIMECWIRE/01 MOB Monowire Plants For Cutting And Squaring Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SIMECWIRE/01 –MOB, besides having the same characteristics of the stationary version, it has the possibility to translate on tracks, thus turning out to be especially suitable to cut slabs. The transmission of the movement on tracks is obtained by a precise pinion-rack system controlled by brushless motors and encoders on both sides, as it takes place on the most precise tool machines. For squaring blocks, the machine can be equipped with a rotating trolley.

MBC SMART - Edge Bevelling Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone

Machinery Function Features:

MBC Smart is an automatic machine for ceramic, gres porcelain, marble and granite bevelling.

Robot Wire 1600-2600 Cutting Profiling Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

CNC system with 4 controlled axes for two dimensional profiling of marble, granite and other ornamental stone blocks, usiing diamond wire; can also be used for block dressing and slabbing.

New Monolame Block Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Maveco has developed and builed a brand new Monolame to coop with the demand of higher blocksize and capicity. The Monolame is suitable for cutting various kinds of natural stones like sandstone, limestone and marble. A block is placed on a sawing car and after this the Monolame cuts the stones in the desired formats.

Standard Block Carriages on Railway for Any Use

Type: Stone Factory Machines › Stone Handling, Loading Machines › Block Turnover-Tilting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Jolly - Block carriages Standard block carriages on railway for any use. Used with single and multiple wire diamond wire saws, for 40 or 60 ton blocks.

SIMEC M40 –M50 Open Frame Gangsaws for Marble Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

SIMEC M40 and M50 are open frame rectilinear motion gangsaws for the sawing of marbles and/or engineered marbles. These machines are the result of SIMEC’s great experience in manufacturing gangsaws, with thousands of marble gangsaws all over the world, and in the utilization in the most modern CAD technologies, that allow a precise calculation of the efforts sustained by each single piece.

Bidese Impianti-Top Wire Junior CNC Diamond Single Wire Shaping Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Artistic diamond wire which creates straight or curved surfaces by combining two axes of flexibility for the machine. Developed Software which allows easy programming without requiring the user's presence during operation. The diamond wire operates with a motor controlled by inverter, for a possible change in the speed of the wire if needed. It also has CAD-CAM program to convert the file into an executable form.

Super 240T Frame Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Closed Frame Gang Saw

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

SIMEC Maxi 3000RX MOB Maxi 3500RX MOB Block Sawing Machines With Giant Disc

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

The working centers MAXI RX MOB offer high precision requisites thanks to the translation system of the cutting bridge made with interchangeable steel “V”slides of high resistance, that can also be ground, as well as the precision motors and reducers, synchronized by encoder on each column. Once the machine places itself on the cutting point, it locks its position as to avoid vibrations and accidental movement.

Polywire 5/34 Diamond Wire Saw for Marble,Granite

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

Polywire 5/34 multi diamond wire saw for marble,granite blocks Stationary multiple diamond wire saw to cut up to 34 slabs at the same time. Complete with a PLC and CNC system.

DSA - AUTOMATIC CHANNELING UNIT FOR SLABS

Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

DSA - AUTOMATIC CHANNELING UNIT FOR SLABS Available in 2 models for formats of 90 and 120cm.