Travertine Multi Wire Saw Machine in Poland

The single line cutting system is a machine designed to cut rectangular blocks or granite slabs into large slab thicknesses. The device consists of a supporting structure with two flywheels, 2500 mm in diameter, which move the diamond wire for cutting. The speed of the wheels, and therefore of the rope, is variable and controlled by an inverter. The downward movement of the rope takes place by means of two roller carriages that move along a square column. This type of system allows high stiffness and, at the same time, very good smoothness. The rope tension is hydraulically regulated at constant pressure. The device can be equipped with fixed or rotating trolleys. They are always driven by a geared motor, controlled by an inverter and an encoder for precise positioning of the trolley.

The 70 rope cutting system is a machine designed to cut granite blocks into various thicknesses of plates. The machine consists of four columns on which four carriages move
in the hydraulic system. Additionally, the structure has integrated hydraulic locks that enable the installation of lines. The drive drum is 2200 mm in diameter while on the other hand two drums are 880 in diameter and a group of hydraulic cable tensions. The machine is complete with an automatic locking system for the cut plates. The machine is equipped with a modern, hydraulic rope lowering / lifting system. The hydraulic system consists of four electronically controlled cylinders. The shifts can be with the same speed or with different - independent. You can also control the left and right sides of the columns separately, which allows you to perfectly align the ropes to uneven blocks.