Conservation treatment of kitchen stone

As the raw materials are artificial stone resin adhesive, the structure more closely, low water absorption, and of treatment for water penetration is slow and when one does not penetrate too deep, so it generally takes more than twice a protective treatment, twice brushing time interval of 2 hours or more. In addition, the protective wax layer before construction to ensure that no other seal, if any wax or sealant surface treatment, should wax layer or sealing layer.

First, the bottom and around the
In the construction of kitchen stone products made before the protection process, it is appropriate oily special protective agent to prevent penetration of cement mortar and other pan-alkali; needed to add air drums in the repellant agent to prevent rock bottom with the adhesive layer of cement mortar, etc. the incompatibility arising from hollowing phenomenon.

Second, the kitchen stone surface treatment
To prevent outside contamination, which can effectively prevent oil, dark outside sources due to infiltration of pollutants and other contamination of the stone.

Three, six kitchen stone surface protection method
1, artificial stone surface of the wax layer, disease and other stains clean, man-made stone to be completely dry;
2, with a clean soft brush, roller or spray can in the man-made stone surface evenly coated with a thin layer of protective agent;
3, as the case until the first 1-2 hours after brushing and then brushing the second corresponding protection products;
4, brushing is completed, it normally takes 12 hours or more (preferably 24 hours) to air dry in order to ensure full penetration and drying agents;
5, with a clean soft cloth dampened slightly to wipe clean the surface of equal protection products, so as not to affect the luminosity.