man made stone products renovation

faded artificial stone for grinding, polishing, removing artificial stone surface defects, artificial stone to restore the original color, luster, restore the original space man-made stone decorative effect.

1, man made stone products stone preparatory work before renovation
With water or neutral detergent to clean the surface of artificial stone dust, sand and other impurities, generated in the process to avoid the renovation hidden scratches (if man-made stone disease has occurred, should clear the disease); prepare necessary materials and tools ( polishing agents and special machinery).

2, man made stone products notches, renovation process
Laying the ground if there is irregular patchwork brick, walk on will be a stumbling block, and the cracks between the blocks and hidden dirt, this time leveling notches on the handle needs to be done to eliminate the uneven stone; followed by further crystal hardening process, in Stone crystal surface to form a hard dense hard layer, making the stone surface with a stain, easy to wear, and significantly improved gloss, so that stone face more beautiful, more noble.
Required equipment: multi-stone heavier machine, with heavy iron, various types of diamond grinding, 3M polishing pads, steel wool and other vacuum suction machine, and various accessories, and other special tools.
Pharmaceutical materials: stone hard crystalline powder, artificial stone restoration and maintenance solution RH1/RH2, anti-fouling agent artificial stone dedicated agents.
The required duration: every 8 hours for each machine processing 35 ~ 50m 2.

3, the program flow: leveling notches seamless processing → → → coarse grinding fine grinding → → → polishing → crystal surface treatment of treatment.
◆ No sewing operation processing procedure -1
Operation of filling some flaws with the appropriate sealant fill joints.
◆ procedure notches leveling -2
Stone sealant to be completely dry, use 50 # or 100 # grinding grinding, this process should notches polished, long time. Where large notches first hand polishing machine processing, and then machine polished notches; then use the thick disc to the gap outside the marble polished smooth plastic; and then the whole man-made stone floors polished, the polished smooth mouth all the high and low gap .
◆ procedure in disc grinding -4
Use 150 #, 300 #, 500 #, 800 # discs, even one level from the coarse to fine grinding.
◆ fine grinding polishing -3 procedure
First man made stone products surface with clean water stains machine, then use 1000 #, 2000 #, 3000 #, the completion of finely ground stone for polishing, be sure to remove scratches, showing stone finish.
Done more work, stone renovation job is over, the water, dust, air drying the future, they can do maintenance work late crystallization.
◆ Crystal Hard conservation -3 procedure
After completion of the above process, the initial man-made stone surface clean;
Use of artificial crystal stone dedicated hard powder, with crystal face conservation machines, scouring pads on the surface of artificial stone grinding to bright, artificial stone to increase surface hardness and gloss;
Use heavier machine with steel wool, alternating use of artificial stone restoration and maintenance solution RH1, RH2 polished, agents use the order RH1/RH2/RH3; RH1/RH2/RH3 each grinding process, each machine to be polished as a unit 2m 2 ;
Crystal Hard curing process after the gloss is generally able to achieve 80 ~ 90 ° or more;
◆ of treatment (water and oil,) -1 optional procedure
Use oil-based anti-fouling agents, with the crystal surface maintenance machine, steel wool, cotton and other man-made stone surface grinding, until the ground was dry; this time the ground is not hydrophilic nor lipophilic, has a certain anti-fouling, anti-skid function.