Post Your Needs

Epoxy Cer Epoxy Adhesive Structural

SupplierSupplier Detail

Established: Dec 31,1974

Main Product: acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators

Alberto Cattini

Alberto Cattini
CEO

Tel: +39-059 450991- 059 450 978

Adr: Via Repubblica di S. Marino, 8 - 41122 Modena, Italy

Related products from other suppliersRelated Stone Epoxy products from other supplier

Product description

EPOXY ADHESIVE, STRUCTURAL, BI-COMPONENT, FAST POLYMERISATION, FOR BUILDING MATERIALS, BRICKS, CERAMIC PRODUCTS, MARBLE, GRANITE, WOOD, METAL 

The product is expressily formulated for mechanical application on ceramic materials and is based on epoxy resin reinforced by mineral fillers and catalized by a mix of aminic hardeners in order to obtain a quick hardening also at room temperature. The different color of the two components allows a sight control of the homogeneity of mixing. Furthermore, once hardened and completed the catalysis (24-48 hours after the application), the product can get in contact with the water of swimming pools and thermal waters. 

COMPOSITION 

COMPONENT A: epoxy resins bisphenol A/F, mineral fillers and mineral pigments. 

COMPONENT B: mix of agents of catalysis containing amine adducts, mineral fillers and mineral pigments MIXING RATIO The epoxy adhesive need exact mixing ratio in weight between the component A (resin) and the component B (catalyst), and in this case: COMPONENT A : COMPONENT B = 100 : 100 (i.e.: 1 kg of component A mixed with 1 kg of component B) PHYSICAL CHARACTERISTICS COMPONENT A COMPONENT B 

MIXTURE 

Color light grey dark beige cement grey Specific weight (g/cm3 ) 1,50 ± 0,20 1,50 ± 0,20 1,50 ± 0,20 Using time after mixing (100g. comp. A + 100g. comp. B) at 25°C/77°F 10-20 minutes Hardening time after mixing (100g. comp. A + 100g. comp. B) at 25°C/77°F 55-65 minues Total hardening time (complete cross-linking =100%) 4-5 days

IMPORTANT: the product doesn’t harden at temperature lower than +10°C/50°F Temperatures higher than +30°C/86°F reduce excessively the using/hardening time 

PREPARING THE SURFACE 

The pieces to be worked/bonded must be porous, dry, free from dust, greasy and alien substances and, if needed, mechanically roughened. 

APPLICATION 

Mix carefully the two components with the above mentioned mixing ratio until the complete homogeneity of the mixture without lumps, till to homogeneous colour, and apply the adhesive IMPORTANT For materials of low or you very low porosity (i.e.: glass), in order to have to have a mechanical seal with a good degree of safety, you must make a joint or insert fixing pins. 

THICKNESS 

The best adhesive characteristics are obtained with thicknesses of adhesive from 0.3 to 1.0 mm.

STABILITY 

The product is stable 12 months in the original and closed cans stored at temperatures between +10°C/50°F and +30°C/86°F Protect from frost the stored cans. 

POLYMERISATION 

The polymerization rate increases with increasing temperature. The application temperature must not be lower than +10°C / 50°F Suggested application temperature between +10°C/50°F and +30°C/86°F

Related products from this supplierRelated Stone Epoxy products from this supplier

Related products from other suppliersRelated Stone Epoxy products from other supplier

Send your message to this supplier

* To:
Alberto Cattini

Enter between 20 to 4,000 characters.

This is not what you are looking for?◎ Post a Sourcing Request Now

Categories

Company Profile

Company Name:
Industria Chimica General Srl
Business Type:
Stone Adhesives & Chemicals
Country/Region:
Italy
Established:
Dec 31,1974
Verification Type:
Free

Company Overview

Company Description

Giancarlo Cattini established the INDUSTRIA CHIMICA GENERAL in the mid-seventies in Modena.
The company’s growth is founded on the product quality, the self financing, the reinvestment of the profit into the company and the absolute reliability towards the customers and the suppliers.
Because of the increase of orders and turnover in the eighties involves in the company his wife Gianna Ferrari and the brother Marco Cattini, with the entry in the company of the son Alberto Cattini on 2005, the whole actual share structure.
In 1990 GENERAL moves into the new factory and thanks to the further buildings extension in 1997 the production capacity is increased fivefold.
In 2003 starts the production of the new factory build on 15000 square meters ground of Bondeno (Ferrara) with a technologically advanced line for the production of cement powder adhesives line laying floor and wall and afterwards a production line for resinoid diamond abrasives.
The constant evolutions and transformations of the production and managerial process of the company are the base on which has been obtained the certification of the Quality System according to the UNI EN ISO 9001:2008 during the years 2005.
Industria Chimica General
Via Rep. S. Marino, 8 - 41122 Modena, Italy
P.IVA / C.F. 01646960367 - Reg. imprese di Modena n. 232566
Tel. +39 059.450.991/059.450.978 
Fax +39 059.450.615
[email protected]

Tradeshow

MARMOMAC 2020

Trade showTrade showTrade showTrade show

MARMOMAC 2018

Trade showTrade showTrade showTrade showTrade show