Post Your Needs

Epoxy Extra Ctr Transparent Fluid Epoxy Adhesive

COMPOSITION COMPONENT A: Fluid epoxy transparent resin (molecular weight >700) COMPONENT B: Mixture of cycloaliphatic amines and agents of catalysis USE Permanent gluing of marble, natural stones to each other ot to other materials (metal, cement, concrete etc.) COLOUR Transparent MIXING RATIO Epoxy adhesives require exact mixing ratio, in weight, between component A (resin) and component B (ca

SupplierSupplier Detail

Established: Dec 31,1974

Main Product: acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators

Alberto Cattini

Alberto Cattini
CEO

Tel: +39-059 450991- 059 450 978

Adr: Via Repubblica di S. Marino, 8 - 41122 Modena, Italy

Related products from other suppliersRelated Stone Epoxy products from other supplier

Product description

COMPOSITION 

COMPONENT A: Fluid epoxy transparent resin (molecular weight >700) 

COMPONENT B: Mixture of cycloaliphatic amines and agents of catalysis USE Permanent gluing of marble, natural stones to each other ot to other materials (metal, cement, concrete etc.) 

COLOUR Transparent MIXING RATIO Epoxy adhesives require exact mixing ratio, in weight, between component A (resin) and component B (catalyst). In this case the ratio is: COMPONENT A : COMPONENT B = 100 : 50 (for example: 1 kg. of component A mixed with 0.5oo kg. of component B 

PACKAGING 

EPOXY EXTRA CTR component A can of 0.8oo kg. - kg. 10 - kg. 20 EPOXY EXTRA CTR component B can of 0.4oo kg. - kg. 5 - kg. 10 

SURFACE PREPARATION Surface to be treated/glued to be porous, clean, dry and free from dust, grease or any other alien substance MIXING Mix the quantities as indicated in MIXING RATIO above until completely blended 

APPLICATION With putty knife or spreading . Do not apply at temperature lower than +10°C (50°F) Suggested application temperature between +10 (50°F) and +30°C (86°F) 

THICKNESS The best adhesive characteristics are obtained with thicknesses of adhesive from 0.3 to 1.0 mm 

CONSUMPTION 250 to 700 gr/m² 

POLYMERISATION The rate of reaction increases with the temperature, witch should never fall below +10°C (50°F). 

HARDENING at 25°C (77°F) 65 minutes in mass, 190 minutes in thin coat (applied). 

NOTE based on the data reported, workability time is considered to be 30 to 35 minutes Do not store at temperature lower than +10°C (50°F) and higher than +35°C (95°F) Protect from frost the stored cans/tins 

SHRINKAGE COEFFICENT 0,3 %

Related products from this supplierRelated Stone Epoxy products from this supplier

Related products from other suppliersRelated Stone Epoxy products from other supplier

Send your message to this supplier

* To:
Alberto Cattini

Enter between 20 to 4,000 characters.

This is not what you are looking for?◎ Post a Sourcing Request Now

Categories

Company Profile

Company Name:
Industria Chimica General Srl
Business Type:
Stone Adhesives & Chemicals
Country/Region:
Italy
Established:
Dec 31,1974
Verification Type:
Free

Company Overview

Company Description

Giancarlo Cattini established the INDUSTRIA CHIMICA GENERAL in the mid-seventies in Modena.
The company’s growth is founded on the product quality, the self financing, the reinvestment of the profit into the company and the absolute reliability towards the customers and the suppliers.
Because of the increase of orders and turnover in the eighties involves in the company his wife Gianna Ferrari and the brother Marco Cattini, with the entry in the company of the son Alberto Cattini on 2005, the whole actual share structure.
In 1990 GENERAL moves into the new factory and thanks to the further buildings extension in 1997 the production capacity is increased fivefold.
In 2003 starts the production of the new factory build on 15000 square meters ground of Bondeno (Ferrara) with a technologically advanced line for the production of cement powder adhesives line laying floor and wall and afterwards a production line for resinoid diamond abrasives.
The constant evolutions and transformations of the production and managerial process of the company are the base on which has been obtained the certification of the Quality System according to the UNI EN ISO 9001:2008 during the years 2005.
Industria Chimica General
Via Rep. S. Marino, 8 - 41122 Modena, Italy
P.IVA / C.F. 01646960367 - Reg. imprese di Modena n. 232566
Tel. +39 059.450.991/059.450.978 
Fax +39 059.450.615
[email protected]

Tradeshow

MARMOMAC 2020

Trade showTrade showTrade showTrade show

MARMOMAC 2018

Trade showTrade showTrade showTrade showTrade show