Post Your Needs

Epoxy T.S.E. Transparent Solid Epoxy Adhesive/Glue

COMPOSITION COMPONENT A: Tixotropized pure epoxy resin with pyrogenic silica COMPONENT B: Tixotropized mix of catalysis agents containing adducts of amines, tertiary amines USE Permanent gluing of marbles, granites and natural stones between them or with other supports (metals, concrete, terracotta, wood, etc…)\MIXING RATIO The epoxy adhesives/glues need exact mixing ratio in weight between the c

SupplierSupplier Detail

Established: Dec 31,1974

Main Product: acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators

Alberto Cattini

Alberto Cattini
CEO

Tel: +39-059 450991- 059 450 978

Adr: Via Repubblica di S. Marino, 8 - 41122 Modena, Italy

Related products from other suppliersRelated Stone Epoxy products from other supplier

Product description

COMPOSITION COMPONENT A: Tixotropized pure epoxy resin with pyrogenic silica COMPONENT B: Tixotropized mix of catalysis agents containing adducts of amines, tertiary amines 

 USE Permanent gluing of marbles, granites and natural stones between them or with other supports (metals, concrete, terracotta, wood, etc…)

\MIXING RATIO The epoxy adhesives/glues need exact mixing ratio in weight between the component A (resin) and component B (catalyst). In this case: COMPONENT A : COMPONENT B = 100 : 50 (i.e. 100 gr. of component A mixed with 50 gr. of component B) COLOUR TRANSPARENT opaque PACKAGING EPOXY T.S.E. component A metal tin of 1.o kg. EPOXY T.S.E. component B metal tin of 0,5 kg. 

 SURFACE PREPARATION The pieces/surfaces to be treated/glued must be porous, dry and clean, free from dust and alien substances MIXING Dose and mix in the best careful way. Take from the can the needed quantity of the two components (keep the ratio 2A:1B in weight) and mix carefully some minutes. 

APPLICATION By putty knife or spreading. Do not apply at temperature lower than +10°C(50°F) Suggested temperature of application between +10°C (50°F) and +30°C (86°F) 

THICKNESS The best adhesive characteristics are obtained with thicknesses of adhesive from 0.3 to 1.0 mm CONSUMPTION 250 - 700 g/sq.meter 

POLYMERIZATION The hardening is a progressive reaction in the time of bond development and strengthening; cold and heat dispersions slow down (some times, very much) this reaction. Do not apply at temperatures lower than +10°C (50°F); below this temperature the hardening of small quantities or thin layers can highly slow down and becomes difficult. 

HARDENING at 25°C (77°F) 80 - 100 minutes in mass; 200 - 300 minutes in thin layer (applied). Work time is considered to be 30 to 50 minutes

Related products from this supplierRelated Stone Epoxy products from this supplier

Related products from other suppliersRelated Stone Epoxy products from other supplier

Send your message to this supplier

* To:
Alberto Cattini

Enter between 20 to 4,000 characters.

This is not what you are looking for?◎ Post a Sourcing Request Now

Categories

Company Profile

Company Name:
Industria Chimica General Srl
Business Type:
Stone Adhesives & Chemicals
Country/Region:
Italy
Established:
Dec 31,1974
Verification Type:
Free

Company Overview

Company Description

Giancarlo Cattini established the INDUSTRIA CHIMICA GENERAL in the mid-seventies in Modena.
The company’s growth is founded on the product quality, the self financing, the reinvestment of the profit into the company and the absolute reliability towards the customers and the suppliers.
Because of the increase of orders and turnover in the eighties involves in the company his wife Gianna Ferrari and the brother Marco Cattini, with the entry in the company of the son Alberto Cattini on 2005, the whole actual share structure.
In 1990 GENERAL moves into the new factory and thanks to the further buildings extension in 1997 the production capacity is increased fivefold.
In 2003 starts the production of the new factory build on 15000 square meters ground of Bondeno (Ferrara) with a technologically advanced line for the production of cement powder adhesives line laying floor and wall and afterwards a production line for resinoid diamond abrasives.
The constant evolutions and transformations of the production and managerial process of the company are the base on which has been obtained the certification of the Quality System according to the UNI EN ISO 9001:2008 during the years 2005.
Industria Chimica General
Via Rep. S. Marino, 8 - 41122 Modena, Italy
P.IVA / C.F. 01646960367 - Reg. imprese di Modena n. 232566
Tel. +39 059.450.991/059.450.978 
Fax +39 059.450.615
[email protected]

Tradeshow

MARMOMAC 2020

Trade showTrade showTrade showTrade show

MARMOMAC 2018

Trade showTrade showTrade showTrade showTrade show