Hammer Crusher

A hammer crusher from the high-performance series is a machine designed for medium and fine-grained crushing of materials of various hardness (for stone, e.g. sandstone - basalt), including recycled waste (for aluminum, electronic equipment). In our offer you will find machines with horizontal or vertical operation, in various sizes (power, amount of charge, production capacity, fraction of the finished product). In principle, the impact is the most important for the operation of the hammer crusher. Inside the crushing chamber there is a rotor to which hammers are attached. Falling fragments are hit by them, which changes the direction of their fall. This is to maximize the force with which they collide with the plates on the swinging beams. Then it goes to further, mutual collisions, thanks to which an even greater fragmentation is achieved. Purpose of machines: Due to its properties, the hammer crusher is often used in mining and aggregate mines, especially for stone. It is also often used where recycling is important for entrepreneurs - during demolition works or in scrap yards. The most frequently processed materials include: basalt sandstone charcoal coal stone concrete brick calcium aluminum electronic equipment Hammer crushers with horizontal action have the ability to regulate the obtained fraction of goods by using a transverse grate at the material outlet. Thanks to this, you have full control over the obtained fraction of the finished material. Machines designed for crushing materials with a moisture content of up to 15%! Vertical action hammer crushers are characterized by crushing the material to fractions below 1 mm. The characteristics of the machine and the lack of the use of a grate / sieve allow for crushing materials with increased humidity, with the possibility of wet crushing (feeding a stream of water along with the material to be crushed). In all types of hammer crushers, the internal walls and hammers are made of high-quality and wear-resistant manganese steel, which makes the use of the machines effective, long-lasting and economical. AVAILABLE MODELS HORIZONTAL PERFORMANCE HAMMER CRUSHERS model max load capacity power fraction (adjustable) KM-PO / E-300x400 to 350mm up to 6 t / h 11Kw 0.5mm to 30mm KM-PO / E-400x600 up to 550mm up to 15 t / h 18.5 - 30 Kw 0.5mm up to 50mm KM-PO / E-600x800 up to 750mm up to 25 t / h 55 Kw 0.5mm up to 70mm KM-PO / E-800x1000 up to 950mm up to 38 t / h 75 Kw 0.5mm up to 80mm KM-PO / E-1000x1200 up to 1150mm up to 50 t / h 110 - 132 Kw 0.5mm up to 100mm Caution: 1. The given capacities refer to the material with a density of 1000 kg / m3. 2. Our products are constantly updated and improved, AZ TECH Sp. z .o. reserves the right to change parameters and design without prior notice to the user; 3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing. HAMMER CRUSHERS WITH VERTICAL ACTION model max load capacity power fraction KM-PI-800 up to 300mm up to 15 t / h 22 Kw under 1mm KM-PI-1000 up to 200mm up to 25 t / h 37 Kw under 0.8mm KM-PI-1250 up to 700mm up to 40 t / h 55 - 75 Kw under 0.6mm KM-PI-1500 up to 550mm up to 60 t / h 75 - 110 Kw under 0.5mm Caution: 1. The given capacities refer to the material with a density of 1000 kg / m3. 2. Our products are constantly updated and improved, AZ TECH Sp. z .o. reserves the right to change parameters and design without prior notice to the user; 3. The above product configuration is not necessarily a standard configuration. Please consult us carefully when purchasing.