Home ProductsStone MachineryStone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
MAX - Stationary Engraving Machine
FOB Price:€5500-6500
Type:
Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving,Engraving Machine
Usage:
Granite, Marble, Limestone, Basalt, Quartzite, Sandstone
After-Sale
Warranty:12 Months
Install and Guarantee:Remote guidance installation
Maintenance:Online software upgrade, Remote troubleshooting
Trade Terms
Delivery Details: EXW,CIP,CPT
Payment :
Machinery Function Features
“MAX” - stationary engraving machine, with a working field of 140 X 70 cm.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.
Engraving head of the new regeneration enables to engrave images two times faster in comparison with machines of the previous generation.
Feed-back system of engraving head provides automatic tuning of impact force in the course of operation.
Working Gap Intelligent Stabilization System (stabilizer) has no analogues to be applied on any other similar equipment. Stabilizer has no mechanic units that result in significant increase of reliability, accuracy and durability of the machine in general. Operation of the stabilizer is entirely “transparent” for the machine operator, that considerably reduces handwork and excludes “human factor” when engraving images.
Operational life of engraving head is significantly increased due to absence of rubbing parts (bearing, etc.) in it.
Quick-released attachment of engraving needle enables to replace needles in matter of seconds, not using auxiliary tools.
Wide range of final image density varying from 50 dpi to over 650 dpi enables production of both: coarse grain as well as highly-detailed typeset quality images.
External Control Unit (Remote) is a compact device with tactile membrane buttons.
It provides basic functions of machine mechanisms travelling with step speed adjustment. It has the mode and current speed setting indicator.
For a comfortable handling the Remote is equipped with a magnetic base.
Standard mini USB connector and АМ/5Р cable are used to connect ECU to the machine.
Connection of the machine to your local network through Wi-Fi or cable Ethernet enables to control the machine from any working place even if it is located in another town (Internet connection is required).
Operate the machine from your Android device.
The state of the job, moving of mechanisms, launching prepared projects - all this and more on your smartphone or tablet wirelessly.
Off-line operation of the machine – automatic downloading of the whole project in the machine enables to completely detach the machine from external control. You can at any time re-connect to the machine from the computer or smartphone or even using them both simultaneously and obtain the full control and complete information on the operation process.
Studio of engraving projects Engraving Studio™ (for ОS Windows®) preparation enables to promptly and visually prepare an engraving model, set all the required parameters and performs engraving using one application.
Technical Data
Parameters |
Unit |
MAX |
Machine overall height |
mm |
700 |
Electricity-Voltage |
V/Hz |
110-240 V ±10%, 50÷60 Hz |
Machine overall length |
mm |
1710 |
Connection interfaces |
USB, Wi-Fi |
|
Efficiency |
Production time of 1 dm2 at filling of 100%: density of 101 dpi – 13,5 min, density of 92 dpi – 11min |
|
Work table dim.(LxWxH) |
mm |
1400 х 700 x 90 |
Delayed start |
Applied. Am image is uploaded to the remote machine (for instance, via Wi-Fi) without starting engraving. Whereupon the operator, being next to the machine and using Android device inputs initial parameters and activates the engraving. |
|
Max. Processing Width |
mm |
1630 |
Approx. Weight |
Kg |
63 |
Head operation frequency |
Hz |
200 |
Allowableout-of-flatness of working surface |
mm |
not more than 3 mm per 300 mm |
Self-driven mode |
Applied. At start of engraving an image is completely uploaded to the machine, whereupon the control computer may be shut off. |
|
Max. processing length |
mm |
Length - unlimited A cart is required (not included in the scope of delivery). |
Machine overall width |
mm |
1032 |
Max. processing thickness |
mm |
30 |
Prevention of unexpected shutdown |
Applied.Upon restoration of power supply the machine may resume operation from the breakpoint. |
|
Density of engraving |
dpi |
Customizable from 50,8 dpi to 677,3 dpi |
Total power |
kw |
not more than 150 VA |
Software
Controlling software matching the operating systems
Engraving Studio: ™ Windows® Vista/7/8/10,
Machine control panel: not less than Android 4.0.x,
Recommended Stone Carving,Engraving Machine Products
Related Products:
Machinery
Factory Machines
Stone Finishing Profiling Machines
Stone Carving Engraving Machine
Granite Carving Engraving Machine
Marble Carving Engraving Machine
Limestone Carving Engraving Machine
Basalt Carving Engraving Machine
Quartzite Carving Engraving Machine
Sandstone Carving Engraving Machine
Kasco Group Machines