Post Your Needs

Verde Paradiso Marble

Verde Paradiso MarbleVerde Paradiso MarbleVerde Paradiso MarbleVerde Paradiso Marble
Verde Paradiso Marble

Green - Marble

Iran

About

Item Details

Material Type:
Marble
Origin:
Iran
Primary Color(s):
Green
Recommended Usage:
Kitchen and bathroom countertops, wash basins, building stone, ornamental stone, stairs, interior, exterior wall and floor applications, mosaic, waterjet pattern, wall panels, table tops, balustrades, columns, wall and pool copings, pool pavers, sculptures, fireplaces
Additional Names:
Verde Paradiso, Green Paradise Marble, Paradise Green Marble, Verde Paradiso Marble
Finished Surface:
Polished,Bush Hammered,Tumbled,Brushed,Honed,Split,Machine Cut,Natural Surface,Sandblasted,Combed,Leathered,Water Jet,Filled,Chiseled,Pickling

Testing

Density:
2700 - 2730 Kg/m³
Flexural Strength:
8-12 MPa
Compressive Strength:
89-112 MPa
Stone texture:
a luxurious green marble, ranging from light to dark green shades and accentuated with distinctive white veining

Description

Verde Paradiso Marble is a luxurious and visually striking natural stone quarried in Iran. It is known for its vibrant green color, which can vary from light to dark shades, and is beautifully accentuated with distinctive white veining. This marble is often sought after for its aesthetic appeal and is used in both residential and commercial applications.

Physical and Mechanical Properties:

  • Water Absorption:Typically low, indicating good resistance to moisture penetration.
  • Density:Usually ranges around 2.7 to 2.73 g/cm³, which is typical for marble, providing a solid and durable material.
  • Flexural Strength:Approximately 8-12 MPa, reflecting its ability to withstand bending stresses.
  • Compressive Strength:Generally between 89-112 MPa, indicating a strong material suitable for load-bearing applications.
  • Hardness:Typically around 3-4 on the Mohs scale, common for marble, indicating moderate hardness.
  • Porosity:Low to medium, which affects its susceptibility to staining and weathering.
  • Slip Resistance:Varied depending on the finish; polished surfaces may be more slippery compared to honed or textured finishes.

Chemical and Mineral Composition:

  • Calcium Carbonate (CaCO3):The primary component, usually above 90% by weight.
  • Silica (SiO2):Minor content, typically around 2-5% by weight.
  • Iron Oxide (Fe2O3):Responsible for some of the color variations; generally less than 2% by weight.
  • Other Minerals:May include trace amounts of feldspar, mica, and chlorite, contributing to the stone’s unique appearance.

Usage:

  • Interior Applications: Ideal for countertops, flooring, wall cladding, and decorative features.
  • Exterior Applications: Suitable for facades and decorative landscaping, although care should be taken to seal and maintain the surface to prevent weathering.
  • Architectural Details: Often used in columns, staircases, and fireplace surrounds.

Maintenance:

  • Sealing: Regular sealing recommended to protect against stains and moisture.
  • Cleaning: Use non-acidic, pH-neutral cleaners to maintain surface integrity.
  • Polishing: Re-polishing may be needed periodically to maintain the shine, especially in high-traffic areas.

Cutting Sizes (cm):

  • Commonly available in standard tile sizes such as 30x30, 40x40, and 60x60 cm.
  • Slab thickness generally ranges from 2 cm to 3 cm, customizable for specific requirements.

Surface Finish Options:

  • Polished: High-gloss finish that enhances the color and veining.
  • Honed: Smooth but without the shine; reduces glare and is less slippery.
  • Brushed: Textured surface offering a rustic appearance.
  • Sandblasted: Rougher finish that provides good slip resistance.
  • Leathered: Adds texture and depth while retaining some shine.

In summary, Verde Paradiso Marble’s distinctive green coloration with white veining makes it a luxurious choice for various architectural and decorative applications. Its physical and mechanical properties, along with chemical composition, ensure durability and versatility, making it ideal for a wide range of design possibilities. Regular maintenance and appropriate finishing options can help preserve its natural beauty and functionality.

FAQ

Can Iran's Verde Paradiso Marble be used exterior applications in cold climates?

Irans Verde Paradiso Marble can be used in exterior applications in cold climates, but there are several considerations to keep in mind. Firstly, Verde Paradiso Marble is a natural stone, and like all natural stones, it has some level of porosity. This means that it can absorb moisture, which can be problematic in freezing temperatures. Water that seeps into the stone can freeze and cause cracks or disintegration. To protect the marble, it is essential to seal it properly with a high-quality stone sealer designed for outdoor use. Regular maintenance and re-sealing may be required to ensure optimal protection against moisture. Secondly, the color and appearance of the marble can be affected by exposure to extreme weather conditions. Freezing temperatures, moisture, and UV radiation can cause fading, discoloration, or staining over time. To mitigate these effects, it is advisable to choose a high-quality marble that is specifically recommended for exterior use and ensure proper sealing and maintenance. Lastly, the installation method is crucial in ensuring the durability and longevity of the marble in cold climates. The stone should be installed using appropriate techniques and materials to ensure proper drainage, prevent water infiltration, and allow for expansion and contraction during freeze-thaw cycles. Overall, while Verde Paradiso Marble can be used in exterior applications in cold climates, careful consideration should be given to proper sealing, maintenance, and installation methods to ensure its longevity and performance in such conditions.

Can Iran's Verde Paradiso Marble be used in a office?

Yes, Irans Verde Paradiso Marble can be used in an office setting. It is a type of green marble with a unique pattern and texture that can add elegance and sophistication to an office space. This marble is often used for countertops, wall claddings, flooring, and other architectural elements in both residential and commercial interiors. Its green color can create a tranquil and calming environment, making it suitable for offices where a peaceful and professional atmosphere is desired.

Can Iran's Verde Paradiso Marble be used in landscaping?

Yes, Irans Verde Paradiso Marble can be used in landscaping. This type of marble is known for its striking green color with white veins, which can add a visually appealing element to outdoor spaces. It can be used for various landscaping applications such as paving walkways, cladding walls, creating ornamental features, building garden structures, and more. However, it should be noted that marble is a natural stone and may require regular maintenance to preserve its appearance and durability in outdoor conditions.

What is the coefficient of friction of Water Jet Cut Iran's Verde Paradiso Marble tiles?

The coefficient of friction for Water Jet Cut Irans Verde Paradiso Marble tiles is not readily available. The coefficient of friction can vary depending on various factors such as the texture, surface finish, and impurities in the marble tiles, as well as the specific conditions in which the tiles are used (e.g., dry or wet surface). It is recommended to contact the manufacturer or supplier of the tiles for information on the coefficient of friction for their specific product.

Are there color variations of Iran's Verde Paradiso Marble?

No, there are no color variations of Irans Verde Paradiso Marble. Verde Paradiso Marble is known for its dominant green color with lighter and darker variations of green, sometimes with hints of grey or black veins. The color pattern remains relatively consistent throughout the stone.

Can Iran's Verde Paradiso Marble be used outdoors?

Yes, Irans Verde Paradiso Marble can be used outdoors. This versatile marble is known for its durability and resistance to harsh weather conditions, making it suitable for outdoor applications such as paving, landscaping, wall cladding, and exterior flooring. However, it is recommended to consult with a professional stone supplier or installer to ensure proper installation and maintenance for long-lasting outdoor usage.

How thick is Iran's Verde Paradiso Marble slabs?

The thickness of Irans Verde Paradiso Marble slabs can vary, but the most common thickness options are typically 2 cm (0.79 inches) or 3 cm (1.18 inches). However, other thicknesses may also be available upon request or for specific customization.

Is Iran's Verde Paradiso Marble an expensive stone?

I do not have access to current market prices or data, but generally, Verde Paradiso Marble is considered a medium to high-end stone and can be relatively expensive compared to other types of marble due to its unique and attractive color patterns. Factors that can affect the price include quality, size, and availability.

Products & Prices

Verde Paradiso Marble Products

Hot Green Marble

New Marble

Post Your Request

The request includes:
  1. surface finished, size
  2. quantity required