Cnc Bridge Saw Machine in Spain

The Evo Cut its a bridge saw, completely constructed in cast iron, the axis move on linear guideways, by brushless motors on high precision racks, the movement is very precise and the the structure is very rigid.
The machine is avaiable as a standard 3 axis machine, or as a 5 axis machine with everything that the standard machine has, more the high speed spindle and the automatic table rotation.

3 AXIS
The standard machine has 3 interpolated axis, the machine does all the normal bridge saw cuts with the blade, the table is manual but it can be locked at any degree.
The machine can also combine DXF to work 3D shapes with the blade on the surface and on the edge of stones.
The tilting of the blade motor is manual but controlled by logic, this mean that the axis move interpolated depending on the tilting angle.

The machine is supplied with a mountable finger bit head, this head allow the machine to cut complex shapes from DXF files.

4 / 5 AXIS
More of what you get with the standard machine, with the adding of automatic table rotation, and the high speed spindle, the machine can combine the blade and the finger bit to cut any kind of shape from a slab.
The high speed spindle allow also the machine to make incisions on the stone following G-code input.

Ideal600 Monoblock Bridge Saw. Machine with head rotation from 0º to 90º, to cut marble, granite, quartz and porcelain slabs. Ref. 8902
Bridge Saw Monoblock Ideal600
Ref. 8902 Technical characteristics:
One-piece self-supporting steel structure.
The structure does not need a foundation and is completely fixed to the ground.
Structure accompanied by tilting bench with wood and rubber surface.
Technical characteristics:
-Maximum cutting length (X axis): 3300mm
-Maximum cutting width (Y axis): 2000mm
-Max cutting thickness (Z axis): 150mm
-Max thickness cut to miter cut: 60mm
-Diameter of disc: minimum 400mm – maximum 600mm
-Max. Miter cut disc diameter: 400mm
-Diameter of disc shaft: 50mm
-Degrees of horizontal rotation of the head: Fixed positions of 0º / 90 °. This head does not interpolate.
-Table dimensions: 3200 × 2000 mm
-Tilt Table Tilt: 85 ° (Approx.)
-Manual table rotation 360 ° with locking of all positions
-Disk motor power: 15Kw
-Motor power (X axis): 2.2 Kw
-Motor power (Y axis): 1.5 Kw
-Power of the up / down motor (Z axis): 0.75 Kw
-Oil pump power 3Kw
-Total power: 23Kw
-Speed ​​of rotation of the disk motor 1440 rpm
-Required air pressure: 6 bar
-Weight of the machine 6500Kg
-Machine dimensions: 5800x3400x2300mm