Quarry diamond wire saw machines are practical wire cutting machines designed to be used in marble, limestone, sandstone, granite quarries. Of course, in order for this machine to be used, the location of the quarry is as important as the hardness of the stone to be removed from the quarry.
The fact that the machine is not too heavy provides ease of relocation.
These machines are sometimes used to cut the stone from the quarry as blocks, and sometimes to cut the edges of the removed stone blocks into a standard shape.
In addition, these machines can be used for cutting large concrete masses in various construction projects or demolition works.
The advanced design and manufacturing technology applied, the diamond wire saw machines are suitable for opening granite, marble and sandstone quarries. The quarry wire saw machine head can be adjusted and rotated automatically. Vector frequency converters are equipped to ensure stable torque output. The feeding speed can be adjusted automatically by the constant tension control system. The setting is fixed, so the cutting condition always remains optimum. The operation panel can be wire-controlled and remote-controlled, the monitor can display instantaneous current, feed rate and cutting data.
The machine cuts on the top rail on its own. Since the machine is fixed in 5 different regions while cutting, there is no gap and continuous cutting when cutting, this means more cutting than rail machines. Machine control wired remote controller Feet hydraulic system adjustable
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Gücü / Engine Power 55 Kw (75 hps) 1000 dev/dk (Rpm) 380 volt Yürüyüş Sistemi / Movement System 1.1 KW 2 hp Turbo Beyin Kontrollü / Turbo Intellegence Controls Makine Kontrolü / Machine Control Kablolu Uzaktan Kumanda / Remote Controller with cable Elektrik Motor Kalkış Sistemi Engine Starting System Hız Kontrollü / Speed Controller Kesme Kapasitesi / Cutting Capacity 18-28 m2/ Saat Mermer Sertliği ve Elmas Tele Göre Değişir 18-28 m2 / Hour Chan
VIP 914 Diamond Wire Quarry Machines The diamond wire saw mod. vip/914 is a compact design, which can cut in any direction, vertical, horizontal, or inclined, straight against the wall/floor of the benches, in quarries of marble or granite. This machine allows to make two adjacent cuts at 160 cm distance from each other in a single positioning on rails. The rotation and the lateral adjustment of the drive unit are motorized. VIP 914 Inverter the model with vectorial inverter control system allow
Main Motor: 55kW Feed Motion Motor: 1,1kW with inverter Flywheel Diameter: 800mm Rails: 3 meters 2 ea. ( Total length: 6 meters) Guide Flywheel: 300mm Working Positions: Vertical and Horizantal Cutting Speed: 10-25 m2/h (depend on hardness of stone) Electrical Components: Siemens Notes: Electrical distribution board and control board installed on machine. Unibody machine helps easy transportation. Main power (input) cable plug-in and run. Automatic feed motion gives two different speed.
Let's think about the construction machinery work machinery first diesel engine by running the engine and the whole load is transferred to the hydraulic system hydraulic engine in our hydraulic machinery, leaving the whole engine to the hydraulic system It offers more strong ropes than the machines in its own group. Since it is hydraulic system, it offers cutting possibility at desired speed. Between 0-1200 cycles. Marble-Granite-Basalt-Travertine Due to the hydraulic system, electrical engine c
Ref.: 51 Head Rotation Diamond Wire machine for cutting stone benches with a wire diamond. The 315o rotation allows the machine to be quickly put into position. Allows horizontal and angled cuts. Allows vertical cuts at a distance of 2.2 m. Automatic stop at the end of cutting and if the wire breaks. Water is switched off at the end of cutting. Easy access for maintenance. High starting torque. Data management and storage. The fastest machine on the market.
Ref.: 49 Standard Diamond Wire Machine for cutting benches with a diamond wire. Reduced power consumption at start-up. Automatic stop at the end of cutting and if the wire breaks. Automatic adjustment of cable tension. Wheel easy to remove to replace rubber. High cutting speed and easy to assemble. Can be used in serial block cutting. Data management and storage.
Ref.: 52 Tracked Extensible Wire Diamond Machine for squaring (to transform mass into blocks). It has Allows the cutting of masses in less time. It is self-propelled, moves on tracks and is easily positioned by the operator. The hydraulic levelling system allows the operator to quickly adjust the start of the cutting process. Does not require a rail. Reduced costs compared to the traditional method. Horizontal adjustment to bench size. Data management and storage. The machine of the future.
Wire Diamond machine for cutting stone benches with a wire diamond. Ideal for narrow and difficult to reach areas, as it does not require a rail because the wire is in a vertical position. The machine is easy to move and be placed into cutting position as there is no need for any other machine. Automatic stop at the end of cutting and automatic adjustment of wire tension. Allows tilted cuts. FEATURE Easy cutting in narrow and difficult to reach areas due to its configuration and diamond wire str
The Diamond wire saw can suit to all kinds of quarry, even the hardness or the crack of stone, the wire saw can be used in, marble, limestone, sandstone, baslt, and granite quarry. the wire saw can apply horizontal, vertical and acclivitous and other direction cutting in the quarry. Diamond wire saw can exploit large specification and regular blocks, the cutting fact is smooth and less hurt to the block, the thin crack of the stone which can save the resource of stone. During using the diamond w
Description: Electrical Motor: 22,5kw 1500 rpm FlywheelDiameter: 600 mm RailLength: 3700 mm Rotation of Flywheel : 360° CuttingSpeed: 8-20 m2 /hr Electrical Components: Siemens Weigth: 750 kg Width : 1350 mm Length : 3850 mm Heigth: 1740 mm Notes:Electrical distribution and control panel fixed on machine. Main external power input cable plug-in panel and run.
TELESCOPIC EXTENSIBLE DIAMOND WIRE MACHINE WITH WHEELS- ELECTRA Ref: 163 The L Telescopic Wire Machine with Wheels is designed for squaring (transforming raw material into blocks). It operates autonomously and moves using wheel-based locomotion. It features automatic wire tension adjustment and horizontal adjustment to fit the size of the workbench. The machine includes data management and memory functions. Patented technology. Key Features and Specification Function: Squaring raw material (ston
Diamond Wire Saw cutter Model: 003 The design of our Cable Cutter cut revolutionized the quarries of our country, were still the most popular in the market. Its main assets are the great functionality and operability as it is not necessary to place tracks on the ground for perfect operation. In addition to this advantage, our machine has a quick coupling plate for attachment bracket, which makes it suitable for transportation with great security and speed.
TD 25 Diamond wire saw for block dressing and small cuts in the quarry. This is the smallest and most manageable machine. The 18 kW GB 6-pole main motor drives a 60 cm flywheel and can be rotated mechanically over 360° for cuts at any angle. OPTIONAL: inverter on a mobile control panel for variable wire speed (0-30 m/s)
TDD 100-120 Super Diamond wire saw with a Diesel engine and a hydraulic converter to cut benches of any size in marble and/or granite. Machine designed for large quarry cuts. The Diesel engine (VM, 4 cylinders, 90kW, air-cooled) is connected GB to the main aluminium flywheel Ø 102 cm through a hydraulic converter and an orthogonal gearbox. The gearbox unit can rotate 360° and can be shifted across the machine on chromed guides to allow two parallel cuts to be made at adjustable distance. Two ele
TL 920 is a machine with powerful chassis. With compact and simple operation and maintenance, it rotates electrically around its axis and can cut at any angle. A separate panel for movement and automation, 10 m distance from the main machine ensures operator's safety. The start is made through star / delta, the promotion with motor of controlled speed while it has a kit of keys and 2 exemption's pulleys.
Strong, compact and easy to use machine, manufactured with a special steel frame connected to the flywheel rotation group. It is designed to perform large primary cuts and block squaring on marble, granite and abrasive stones. The model with vectorial inverter control system allows to vary the diamond wire speed from 0 to 40 m/sec. The machine moves on rails by means of rack/pinion system. The feed system consists of a super card device, that allows a constant tension and control of the diamond
TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine. Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source. The machine is designed to be easily configured for transport from quarry to quarry on trailer. Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
Diamond wire saw machine for quarry This machine combine domestic and overseas advantages to developed. The main motor use transducer control step less speed regulation. Walking also control by transducer speed regulation wide range.and with brake overload protect and have different start moment. Machine low failure rate, stable performance, high efficiency and so on , it is the mine over best quarry equipment . NO. KSJ7.5-700 (marble) KSJ11-700 (marble) KSJ22-800 (marble) KSJ30-800 (marble) KSJ
The electrical control system is equipped with PLC and two vector inverters. All saws with variable speed setting start from 0M/S up to 40M/S. The lateral extension and 360 degree rotation of flywheel-holder head are motorized, which allows to easy and fast positioning of the saw, as well as the execution of two parallel cuts in quarry. All the movement of the machine are motorized. Automatic step-less tensioning-system assures the diamond wire will cut with constant and well programmed tension.
800mm Aluminum Flywheel for Wire Saw Machine The 800mm aluminum flywheel is specially designed for wire saw machines used in stone quarrying and block cutting. Made from high-quality aluminum alloy, it features lightweight construction, excellent balance, high strength, and strong wear resistance. The rubber-lined groove provides stable wire movement and helps reduce vibration during operation, improving cutting efficiency and extending the service life of the diamond wire. Customized flywheels
75 HP (55 KW ) WIRE SAW MACHINE COMPANY NAME KNMBM INTERNATIONAL INTERNATIONAL STANDARD WIRE SAW MACHINE MOTOR RUNING ON A STANDARD 3 PHASE 415 V SUPPLY THE ELECTRCAL WIRING AND CABLE SPECIFICATIONS REQUIEW A COPPER CONDACTOR 25MM TO 35 MM PER PHASE IEC 60228 FOR THE CONDUCTORS AND IEC 60204-1 FOR MACHINE ELECTRIC SAFETY 1 FULLY AUTOMATIC MACHINE 2 HIGH CUTTING EFFICIENCY 3 SMOOTH & STABLE OPERATION 4 PRECISE CUTTING CONTROL 5 LOW MAINTEANCE 6 BUILT FOR MARBLE & GRANITE
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
MAIN CHARACTERISTICS AND ADVANTAGES: STABLE & SOLID Adopt “gantry frame” structure with appropriate rigidity; and equipped with guide-linear-way and its blocks to slide up-and-down on screw-rod while cutting. ACCURATE CUTTING Solid structure, ultimate dynamic balance, and precise motion of guide-linear way units, all these ensure the stable and accurate cutting. HIGHLY EFFICIENCY Cutting with multi wire saws, it optimizes the yield of the slabs. FLEXIBLE It allows to manage the cutting of the st
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 12 Months
Usage: Granite, Marble
Machinery Function Features:
Quarry wire saw machine adopts a PLC control system with dual inverter, applies the principle of constant tension control, and can automatically adjust the moving speed according to the change of cutting force and material, to ensure the efficient cutting and durability of the diamond wires. The machine is equipped with complete safety protection measures such as wire break protection and overload automatic shutdown, it can operate safely and efficiently even under harsh working conditions in th
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Gücü / Engine Power 55 Kw (75 hps) 1000 dev/dk (Rpm) 380 volt Yürüyüş Sistemi / Movement System 1.1 KW 2 hp Turbo Beyin Kontrollü / Turbo Intellegence Controls Makine Kontrolü / Machine Control Kablolu Uzaktan Kumanda / Remote Controller with cable Elektrik Motor Kalkış Sistemi Engine Starting System Hız Kontrollü / Speed Controller Kesme Kapasitesi / Cutting Capacity 18-28 m2/ Saat Mermer Sertliği ve Elmas Tele Göre Değişir 18-28 m2 / Hour Chan
Functions and Features: Being controlled by two sets of inverters and applying constant tension control principle, the moving speed of the machine can be adjusted automatically according to the changes of the cutting force to make sure the diamond wire saw be in the best cutting condition all the time. The machine is without phase request. It doesnot need to change or distinguish the power phase. The machien has the following protection functions: wire broken protection, over-loading protection,
Quarry diamond wire saw machines are practical wire cutting machines designed to be used in marble, limestone, sandstone, granite quarries. Of course, in order for this machine to be used, the location of the quarry is as important as the hardness of the stone to be removed from the quarry.
The fact that the machine is not too heavy provides ease of relocation.
These machines are sometimes used to cut the stone from the quarry as blocks, and sometimes to cut the edges of the removed stone blocks into a standard shape.
In addition, these machines can be used for cutting large concrete masses in various construction projects or demolition works.
The advanced design and manufacturing technology applied, the diamond wire saw machines are suitable for opening granite, marble and sandstone quarries. The quarry wire saw machine head can be adjusted and rotated automatically. Vector frequency converters are equipped to ensure stable torque output. The feeding speed can be adjusted automatically by the constant tension control system. The setting is fixed, so the cutting condition always remains optimum. The operation panel can be wire-controlled and remote-controlled, the monitor can display instantaneous current, feed rate and cutting data.
Ask a Question
Could not find the answer you need? Ask about Granite Marble Quarry Wire Saw.
Questions & Answers on Granite Marble Quarry Wire Saw
What are wire saw machines used for?View answer⌄
Asked by Visitor
Continuous type wire saws are used to cut walls and other large constructions and stone quarries. Continuous type saws are used to cut silicon wafers for the semiconductor and photovoltaic industry. Diamond-impregnated wire saws are used in machine shops to cut metal parts.
Can a wire saw machine cut through metal?View answer⌄
Asked by Visitor
Concrete wire sawing is used to cut through steel and reinforced concrete. Concrete wire sawing gives the most precise cuts on ridges, beams and piers when it comes to making openings in thick walls or removing large concrete structures.
A wire saw is an effective tool when it comes to cutting, but they use abrasion instead of saw teeth for cutting. When compared with other cutting methods, wire sawing offers significant advantages over other cutting methods in various applications