Quartzite Column, Arc Slab Cutting Machine

Product Description
This kerbstone cutting machine line is mainly for cutting slab width above 50mm, the machine cut with 10-14pcs of blade at the same time which will dramatically increase cutting speed and overal output, daily capacity can reach 30-35m³/24h.The stone edge cutting machine is widely used for kerbstone, roadside stone, cobblestone and tombstone etc.
One-stop solution for curbstone cutting With the rapid growth of the economy, city construction requires higher output and more precision for curbstone cutting. DAFON dedicate to curbstone cutting machine lines for more than 10 years, we provide advanced full-line equipment solutions for curbstone.
Technical Parameters
The whole process of kerbstone production
After cutting the stone height by block cutter, a worker hoisted the material to the curbstone slicing machine, another worker hoisted the curbstone cut along the curbstone cutting machine line to the curbstone chamfering machine for grinding and chamfering, and a third worker unloads and packages the material by a small crane behind the chamfering edger. The entire process requires only three workers to operate, which greatly saves labor costs. The whole production continuity is continuous and the stability is good.
Features
1. The main part of the whole machine is made of integrated cast iron, which is conducive to the stability of the machine when cutting.
2. The main and auxiliary shafts are bidirectionally supported and connected, and the main shaft is more durable and not easy to wear after high-frequency quenching and tempering
3. The main machine adopts bilateral oil cylinder lifting instead of screw lifting, providing strong support for the machine
4. The large-scale trolley can process 2 pieces of 80cm blocks at the same time, and the stones are conveyed by the roller, which greatly improves the work efficiency
5. No need to install cement foundation, simple electric control operation, easy to use
Advantages
1. No foundation needed, easy installation, easy for shipping.
2. It adopts an enlarged trolley, 2 pcs of block can be cut at one time, which can greatly improve output and efficiency.
3. It uses the main spindle and a vice spindle to seal together which can ensure the machine is stable while cutting hard granite.
4. It uses a simple program of movement on the controlling box, easy for setting and handle.
5. A hydraulic system is adopted on the machine

Installation
1. Put the machine on the prepared ground.
2. Put several pieces of wood as thick as 50mm on the worktable to prevent blades from cutting into the worktable.
3. Install water pipe.
4. Blade installation: Open blade cover, unscrew 8 retaining bolts and position bolts with a dedicated spanner, loosen auxiliary spindle (shaft), put on blades and clamping plates as per intended stone size (thickness), align oil hole of the auxiliary spindle to air hole according to the arrow direction on auxiliary spindle and box, have them fixed with bolts, close blade cover.
5. Check transmission fluids of the spindle box, auxiliary spindle box, trolley track, and lifting parts.
6. Connect control cabinet power.
One-stop solution for curbstone cutting With the rapid growth of the economy, city construction requires higher output and more precision for curbstone cutting. DAFON dedicate to curbstone cutting machine lines for more than 10 years, we provide advanced full-line equipment solutions for curbstone.

Dafon curb stone intelligent cutting machine line is currently the most efficient integrated curb stone processing solution on the market. The entire line consists of a loading machine, a slicing machine, an edge cutting machine, a transition frame, a stone chamfering machine, etc. Users can optionally install burning machines and polishing equipment according to production requirements, which can realize the cutting, chamfering, rounding, burning, polishing, and other processes of finished curb stones in one go. The entire set of equipment has the characteristics of a high degree of automation, a small footprint, simple operation, and high cutting standards. It can provide customized services according to different needs and application scenarios of users.

Granite Column Cutting and Core Drilling

Fujian Xianda APM-350-2000-10 ,This machine fix circular slab by vacuum, it is better than fix by grippng two sides . And solve the problem which caused verticality and inclination mistake after trimming. It won't brock the edge of column slabs. Also it adopts linear guide ,multi-polishing heads, PLC system control. It has the feature of high precision ,high efficiency ,easy operation , etc. It is the ideal equipment for column slab polishing.

This machine adopts vertical lathe structure principal.which has the advantages of computer automatic profiling with adjustment cutting and so on.It can make up the defect of high consumption of hand-processing and bad precision.The advanced technology reduce the processing cost.

Motor；Jiangsheng

CNC: Beijing stad

Servo drive: Guangzhou GSK

Servo motor: Gete

Contactor: LG

Switch button: SIEMENS

The equipment conforms to the national standard.