2024-03-28 17:50:05
Match Your Image Post Your Needs

Sandstone Infrared Bridge Cutting Machine

( 140 )
Suppliers:
  • SQC/PC-1200/1400 Middle Medium Size Block Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$25000-28000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SQC/PC-1200/1400 Middle Block Cutting Machine uses PLC system and Human-machine interface, combined with Ultra-high precision rotary encoder to locate, and infrared device, it uses inverter to control left-right feeding. Adjusting the speed according to the stone material. It uses hydraulic lifting system. The key part adopt imported good-quality spare parts. Thus the whole machine is featured with high cutting efficiency, high stability, easy-operating to suit specially shaped stone products, tombstone and curb stone.
  • Maya-625 Bridge Saw Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$45000-48000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Steel Frame No need to build concrete walls
    Main Motor Direct Drive - 20 HP (220V 3 phase 60Amp.)+/- 5% regulated 30 kW
    Engine Speed Cutting speed 1450RPM
    Production Rate 10’ in 3cm (1 1/4") granite in less than 60 seconds
    Cutting Thickness 4"-7" (auto cut computerized) Step Cutting (Two way cutting)
    Over all dimensions (L x W x H) 19' x 16' x 8.5' (6.5 x 5.5 x 2.8 m)
    Table Turn/Tilt "http://www.marbleservices.com/Bridge_Saw/Rotating_&_tilting_table">Powered tilting 85° & Power rotating 0° - 360°
    Hydraulic (Stopping at 45"http://www.marbleservices.com/Bridge_Saw/Rotating_&_tilting_table">° & 90"http://www.marbleservices.com/Bridge_Saw/Rotating_&_tilting_table">° Automatic) max carry 0.6 ton
    Blade Tilt "http://www.marbleservices.com/Bridge_Saw/tilting_blade_from_045">0-45° (Hydraulic)
    Blade Size 18" - 24"
    Cut Length 126" x 78”
    Features Programmable functions microcomputer controlled, "http://www.marbleservices.com/Bridge_Saw/ABACO/Bridge_Saw_Laser">Laser guide, Wired Remote control
    Cast iron bridge, approx. production rate 10’ in 50 sec. in 1 1/4” stone
    "http://www.marbleservices.com/Bridge_Saw/Pics/cooling%20sys.jpg"> Hydraulic fluid water cooled
    (LCD) Control Panel,
    All machine parts imported to China and standard all over the world,
    "http://www.marbleservices.com/Bridge_Saw/spare_parts">Spare parts available in our warehouse L.A.
    Water With auto. stop 4 Gall/min
    Shipping Canada add $1,000 - "http://www.marbleservices.com/Bridge_Saw/Packing/Ready_to%20_load"> Packing method
    Warranty 1 Year "http://www.marbleservices.com/privacy_policy"> Terms & Conditions factory only Authorized Dealer
    Purchase Options Financing Available for 60 month Options
    "http://www.marbleservices.com/Bridge_Saw/Stock_Availability"> Stock Availability West 6-7 weeks, East 7-8 weeks
    Install & Training
    "http://www.marbleservices.com/Bridge_Saw/Client%20Responsibility"> Client Responsibility& Preparation
    Price (US/Canada) USD In the USA 48 include all taxes & duty (CA tax 9.75%) "https://www.bankofcardiff.com/secure/apply.cgi?refid=V2072768636">Finance available (Canada tax & duty not included)
    Made
    In China under our control & specification
    Model / S/N 2013 "http://www.marbleservices.com/Bridge_Saw/Pics/CE.pdf">CE certificate
  • Bridge cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Our bridge cutting machine uses of large-span bridge structure,automatic shift sharding,elevating system adopts hydraulic transmission,to achieve steady and rapid rise,slow feed demand,horizontal cutting action is poerated automatically by a central computer.The machine processing precision,stable performance,high production efficiency,automationinstallation operation and maintenance is convenient.



    Bridge cutting machine headstock moves right and left along with the double V-shaped guide rails. adopts imported transducer to process variable speed control and the crossbeam could move forward and backward.Reasonable mechanism, high degree rigidity and steady performance.
  • Bridge Cutter-Express 600
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$15000-25000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Bridge Cutter-Express 600
    Express600 is an ideal machine to cut dimension stone and counter tops.
    It is very flexible. Blade turn 90° & Table turn 360°. Blade can tilt 45°.
    Monobloc steel legs.Max. cutting size 3300*2000mm and 120mm thick.
    1. Space-saving in factory. 10 square meters saved.
    2. Quick installation in stone factory. 1 day only.
    3. Precise 45° mitre cut, for a 90° joint.
    4. Optional:
    A.Online afterservice
    B. 90 tilting head.
    C. Galvanized table
    D.Linear guide of bridge
  • FRT-450/600 steel frame infrared laser bridge saw stone cutting machine full automatic marble granite board sheet slab
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$17500-19000

    Warranty: 12 Months

    Usage: Granite, Marble, Sandstone

    Machinery Function Features:

    This machine adopts PLC programmable control system, man-machine integration of touch screen operation interface, with high precision rotary encoder and the infrared liner, cutting left and right adopts the frequency converter to control the speed, speed can be adjusted according to the stone material, lift up and down adopts hydraulic, the high speed moving parts adopt imported high quality spare parts, so it cutting with high efficiency, high cutting precision, high stability, easy and flexible operation etc, especially suitable for the high value of large specifications of granite, marble slabs cutting. 

    Main motor: Jiangsheng

    PLC: Mitsubishi

    Touch Screen: Xinje

    Transducer: Mitsubishi

    Contactor: LG

    Switch button: SIEMENS

    The equipment conforms to the national standard.
  • COCH C34MAX Bridge Saw Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

    Machinery Function Features:

    The C34 is uniquely suited for small shops as well as handling the most demanding production output. The C34 is capable of miter cutting on all type of granite materials. All operations can be carried out manually, semi automatically or full automatically. The C34 is capable of performing from straight simple cuts to multiple cuts of selected dimensions repeatable up to 99 times.
  • QQ320 Bridge Type Stone Cutter Saw Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$15000-15500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

    Machinery Function Features:

    It adopts PLC control and automatic positioning techniques for various moves of the cutter
    frame & linear rolling guide driving, magnetic
    ruling, laser device setting. It is consists of high
    quality steel. The platform can be 360 degree
    rotatable and automatically turn slate up. It
    can cut sizeable slabs with high precision and
    efficiency
    The lift moving up and down is driven by hydraulic pressure cylinder(or by lead screw).The front and rear moving of blades is driven by high-precision lead screw on the two side beam.Some key parts comprise of imported accessories with high quality.So the blocks can be put on the ground to cut to save the working table and its maintaining fee.Hence,the stone cutter is featured with high efficienty.high accuracy of blades moving ,high stable,easy poerating,the processing slab is high flatness products.
    The machine is suitable for cutting high value granite,marble and other block materials.In addition,the accessories of DPH-2200/2600/2800/3000 bridge type stone cutter can be chosen by customers demands.
  • Thin slabs cutting machine with belt working table
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$18000-25000

    Warranty: 12 Months

    Usage: Marble, Limestone, Slate, Onyx, Artificial Stone, Sandstone

    Machinery Function Features:

    Thin Veneer Saw

    Stone Slicing

    Marble Thin Plate Saw

    Belt working table

    PLC+HMI
     SAT
    SAT

    China China

    SAT

    Contact Supplier

  • FRT-625 steel frame marble granite stone cutting machine bridge saw for kitchen countertop
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$25000-27000

    Warranty: 12 Months

    Usage: Granite, Marble, Sandstone

    Machinery Function Features:

    This machine is controlled by computer.The whole head can tilt 45° ,in solid,the match worktable can turn over 85°and rotate 0-45-360°.Precision manufacturing and assembly of the unique side beam protection devices,touch system which makes the whole machine high precision,high stability and efficiency easy to operate and so on.It is especially suitable for processing granite or marbles with high value and oversize.

    Main motor: Jiangsheng

    PLC: Mitsubishi

    Touch Screen: Xinje

    Transducer: Mitsubishi

    Contactor: LG

    Switch button: SIEMENS

    The equipment conforms to the national standard.
  • Four Guide Pillars Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    FOB Price:$17500-19500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SZQJ-400/600/700/800



    Four Guidepillars Bridge Cutting Blade



    Product Description



    Fujian Kaida Stone Machinery Company is specializes in producing Kaida brand infrared four-guide pillars bridge cutting machine. Mainly used for granite, marble infrared cutting. It is a very important and common equipment in stone processing equipment. The standard specification plates required for fast, accurate and continuous cutting are available upon request.



    The machine construction



    The infrared four-guide pillars cutting machine is composed of the Crossbeam, longitudinal rail boxes, conductors, lifting cylinders, side beams and cement foundation.



    Using laser instrument, Italy imported magnetic scale, microcomputer PLC. The machine is full automation and easy to operate, the work efficiency also improved. Total 4 type machine 400 600 700 800. Tow functions of the conventional and chamfered.



    The worktable can be rotated 45 degrees 90 degrees and 360 degrees, a variety of rotation methods.



    The main motor power is 15KW, 18.5KW, 22KW. available as an option. It meets the cutting requirements of large-size plates on the market.



    Product feature



    1. The electronic control system is independently developed by Kaida Stone Machinery Design Team. It adopts Japan Omron PLC, Germany Schneider inverter, and contactor. It is the key to long-term stable, safe and efficient operation of the equipment.



    2. The machine adopts magnetic scale. Compared with the traditional rotary encoder, the measuring and positioning accuracy and service life have been greatly improved.



    3. The Conductors adopts four-guide pillars hydraulic lifting is more stability than the slide type. The high precision, effectively guarantee the precision of stone cutting.



    4. The main motor adopts famous brand, which provides a strong power source for the equipment and greatly improves the efficiency of the equipment.



    5. Worktable main material is International No. 14 H-shaped steel countertops, made of three materials, multi-process, high strength, good waterproof, corrosion-resistant, adapt to a variety of harsh environments, and long-term continuous operation.
  • Rapida Automatic Bridge Saw Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    Rapida Automatic Bridge Saw Machine:
    Bridge saw machine with main parts built in cast iron, supplied with a PLC of easy and intuitive use to program slabs cutting and cuts and movement.
    It is possible to execute linear shaping.
    Manual table rotation and head tilting.
    Cheap to install (steel or cement walls) and easyto use: formarble, granite and similar stones.
    Construction built in cast iron for stability, low resonance and durability.
    Motor of reduced dimensions co-axial with blade.
    Blade holder slide electrically powered on bearings; guides well-protected from water and dust.
    Electric bridge translation on sliding rails protected by everlasting belt and guards.
    Mono-axial positioning for bridge transaltion with encoder.
    Vertical movement of head with 2-speed self-braking motor on prismatic guides, controlled by encoder.
    Motorised rotating table, with fixed locks every 90° can be blocked in any position
    0° – 360°.
    Manual tilting head from 0° to 90° to cut marble and granite even in short passes.
    The PLC with a graphic touch screen allows programming and interpolation of two axis for concave-convex shaping, contouring, shaving and control of table rotation.
    Separate potentiometer for left/right slide speed and operational controls.
    Amperometer to protect from use of tools above accepted toelrances. Electrical cables and cooling water pipes in nylon cable trailer chain.
    Soundproofed blade guard.
  • Frt-350 Inregrated Bridge Cutting Machine with 45 degree titting cut
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $18700-19300

    Warranty: 12 Months

    Usage: Granite, Marble, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine adopts PLC programmable control system, man-machine integration of touch screen operation interface, with high precision rotary encoder and the infrared liner, cutting left and right adopts the frequency converter to control the speed, speed can be adjusted according to the stone material, lift up and down adopts hydraulic, the high speed moving parts adopt imported high quality spare parts, so it cutting with high efficiency, high cutting precision, high stability, easy and flexible operation etc, especially suitable for the high value of large specifications of granite,marble slabs cutting.
  • Bridge Cutter-P31 (Monoblock)
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $18000-25000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Bridge Cutter – P31 (monoblock)
    The P31 is an automatic Bridge Cutting Machine for cutting slabs, especially for countertops manufacturing. It cuts granite,
    marble and quartz. Machine is made strongly in cast iron which is stable and long life.
    1. Blade is up to 625mm. Variable cutting speed.
    2. Automatic repeat cuts. Auto cycle &Manual cycle.
    3. 45°tilting of the blade & head for mitre cuts. Plunge cutting at 45°is available.
    4. Tilt table allows easy loading of slabs.
    5. A full 360° rotating table enables precision cutting of material edges.
    6. Bridge measuring system enables electronic measurement of the distance travelled.
    7. Fine adjustment of low speed when moving the bridge manually to align at the slabs.
    8. Laser fully installed.
    9.Pendant control station. Easy operation, with touch screen.
  • FRT-1200 infrared laser cement concrete frame stone middle block cutting machine overseas business China best quality
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $18000-20500

    Warranty: 12 Months

    Usage: Granite, Marble, Sandstone

    Machinery Function Features:

    This machine adopts PLC programmable control system, man-machine integration of touch screen operation interface,It adopts large-span bridge structure.The beam and side beam guide rails are all oil-immersed and a thin oil film of Anti-wear lubricant is formed between rail and slide. The protective film of side beam reduces the material consumption to extreme and feed speed adopts frequency control of motor speed and it can be flexibly adjusted according to character of slab with 0º-45º-90º rotating worktable.The machine can cut smoothly and working rate is high because of its flexible rotating,accurate positioning and great rigidity.It’s great equipment for processing high value stone,tombstone handicraft and the stone along the road.

    Motor: Jiangsheng

    PLC: Mitsubishi

    Touch Screen: Xinjie

    Transducer: Mitsubishi

    Contactor: LG

    Bearing:SKF

    Switch button: SIEMENS

    The equipment conforms to the national standard
  • SZQJ 700-800 Infrared Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $17500-19500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SZQJ 700-800 Infrared Bridge Cutting Machine
    1.Blade diameter:700-800mm
    2.Max.working dimension:3200x2000x200mm
    3.Worktable dimension:3200x2000mm
    4.Worktable tilting degree:0-85 degree
    5.Worktable rotating degree:90-360 degree
    6.Main motor power:15-18.5kw
    7.Water consumption:4m^3/h
    8.overall dimension:6000x5000x2800mm
    Any demand for machines paraments, welcome your inquiry. We can offer you latest price sooner.
  • Omega CN Automatic Bridge Saw Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone

    Machinery Function Features:

    Omega CN Automatic Bridge Saw Machine
    Completely automatic bridge saw managed by a PLC multi-function:
    Slabs cut.
    Point shaping.
    Horning or linear profiles.
    Possibility of special works from CAD-CAM files proper for the production of semi-worked items both of marble and granite.

    Table rotation and head inclination motorised, disc diameter up to 850 mm, main parts in cast iron.

    Main frame bench in highly resistant cast for stability/reduced vibration.
    Motor of reduced dimensions connected directly to disc.
    Electronically controlled inverter all required speeds (optional)
    Blade head slide on recirculating ball on guides in hardened steel in the bridge, powered electrically and managed by inverter, to set right speed, and controlled by encoder.
    Operating head vertical movement obtained by auto-braking motor controlled by encoder on prismatic guide coupling and recirculating ball screw.
    Motorised rotating bench blockable in any position, 0°-360°.
    Electrical tilting head from 0°-90° for marble/granite cutting, even in small steps.
    Sealed electrical board outside foundation wall, where remote control is housed.
    Control panel arm with LCD graphics monitor to view data (optional).
    Right/left movement, translation of bridge, up/down movement of head, bench rotation manually controlled. Separate amper-mometer for regulating right/left sliding speed.
    Soundproofed disc guard.
  • Precision Bridge Cutter SNM-FR Slab Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    General features:
    The bridge cutting machine SNM-FR is used for reducing marble and granite slabs into strips and tiles.
    The motor is directly mounted on the spindle. The spindle unit moves vertically by means of an electric motor and reduction gear. The operating head is moved back and forward along the bridge by a rack and pinion assembly driven by a reduction gear motor. It is installed on a slide that moves on the bridge on hard-chrome plated guides protected by suitable caters. The slide movement takes place on a perfectly protected oil bathed guides and its speed is electronically tuned.
    The heavy duty steel work table rotates manually on a completely sealed and lubricated roller bearing with a diameter of 500mm. It can be locked in any position from 0° to 360° and there are two locating pins at 0° and 90°.
    The insulated electric panel attached to the bridge provides the operator convenient access to all the controls (each function is protected by a thermal relay).
    Electric cables and tubes are supported by nylon cable holding chains.
    The 2-step digital preset counter and frequency inverter enables the operator to program acceleration and deceleration brakes for a precise cut with smooth moves.
    Optional features:
    Double table.
    Manually adjustable tilt angle at 90° of the spindle unit.
    Stainless steel covers.
    A laser beam device enables precise diamond disk alignment which is very useful especially when working unsquared pieces.
    An automatic check-size system warns the operator in case the positioning of the head is not within the preset tolerance.
    The magnetic measuring rule with a precision of 1/10mm ensures that no mechanical clearance can ever alter the precision of the cut.
    The tilting table option reduces the down time encountered in loading and unloading slabs.
    The machine can be fitted with a copying device.
  • SQC-700X Tiltable Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $28000-29000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    SQC-700X Tiltable Bridge Cutting Machine uses PLC system and Human-machine interface, combined with Ultra-high precision rotary encoder to locate and infrared device, uses inverter to control left-right feeding, adjusting the speed according to the stone material. It uses hydraulic lifting system. The key part adopt imported good-quality spare parts. The head can rotate 0-50 degree, applied in a wider range. Thus the whole machine is featured as high cutting efficiency, high cutting precision, high stability, easy-operating to suit granite and marble with high value and big size, and shaped stone products.
  • Bridge Cutter-Basic 400/600/800
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $13000-18000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Bridge Cutter – Basic 400/600/800
    The cast iron structure guarantees the stability and durability of the machine.
    The beam moves on special steel prismatic guides in oil bath.
    The spindle slides on cast iron guides in oil bath.
    The machine is equipped with a table tilting up to 85° and rotation 90° automatically.
    PLC control by user-friendly panel, works manually and automatically.
    The X axis cutting speed is adjustable.
    Guides and rails are well protected from water and dust.
    The mahcine is used for cutting regular slabs, with 90 degree table rotation.
  • EmmeDue Semi-Automatic Bridgesaws
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $9995-

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Sandstone, Travertine

  • JNBM-900 Bridge Middle Stone Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Features:
    1. Mainly used for cutting slabs, curbstones, tombstones or monuments;
    2. Complete with oil-immersed guide rail for crossbeam and side beam;
    3. Dust-proof slide track ensures precise guide movement and long service life;
    4. The cutting head can move flexibly in three directions (up/down, left/right, front/back);
    5. The blade input speed can be flexibly adjusted by variable frequency adjustable speed system;
    6. Complete with an infrared ray cutter aligner for precise cutting;
    7. Hydraulic lifting system or screw-rod lifting system (optional);
    8. PLC control system.
  • QUICK-450/600 Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $16500-18100

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    QUICK-450/600 uses PLC system and Human-machine interface, combined with Ultra-high precision rotary encoder to locate and infrared device. The machine uses inverter to control left-right feeding and with the structure optimization and upgrading, the left- right feeding speed is greatly increased,which improving the production capacity. It uses the hydraulic system for up-down lifting and with combination of Chrome-plated guide pin and wearle guide bush, thus the gap is small, machine is wearable and accurate. The spindle box also optimized and upgrade, high RPM is compatible; The main spare parts adopt imported good-quality spare parts. Thus the whole machine is featured as high cutting efficiency, high cutting precision, high stability, easy–operating to suit specially cutting granite, marble and sintered stone.
  • Thin stone veneer saw machine for cutting corner cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $10000-15000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Powerful 45kw 60 Hp main motor
    Man motor with inverter
    Belt motor with inverter
    Return conveyor optional
  • Wanlong YTQQ-500 Mono-block Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $22000-23000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Mono-block bridge cutting machine used for stone slab cutting
  • WSD625 heavy duty Bridge saw  with 45 degree miter cutting
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $15000-25000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Heavy duty type
    45 degree miter cutting
    table lock at any degree
    lock at every 45 degree
  • LXM QZQ-600/1200 Bridge Type Edge Cutting
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $10650-13000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    QZQ-600/1200 Bridge Type Edge Cutting machine(medium size)equipped with 360 degree rotary table adopts wide-span bridge type structure. Horizontal stone slicing can be achieved by moving the girder. The maximum blade vertical stroke can be up to 3.6M with flexibility in rotation, recise in positioning, and stability in operation. Themainframe of the machine adopts imported frequency transducer to achieve stepless adjustment of cutting speed. It is applicable for cutting valuable tombstones.
  • WSD500 countertop bridge saw for workshop
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $13000-18000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Less is more
    Simple type, save cost
    with 45 degree miter cutting
  • SZQJ-400 infrared bridge cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $17000-18000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine is composed of the Crossbeam, longitudinal rail boxes, conductors, lifting cylinders, side beams and cement foundation.
    Using laser instrument, Italy imported magnetic scale, microcomputer PLC. The machine is full automation and easy to operate, the work efficiency also improved. There are 4 models of this machine SZQJ-400/600/700/800.
    The worktable can be rotated for 45, 90 and 360 degrees, a variety of rotation methods.
    The main motor power can be selected from 15KW, 18.5KW and 22KW. It is available as an option. It meets the cutting requirements of large-size plates on the market.
  • FRT-450 infrared laser cement frame bridge saw cutting machine export
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $14500-15500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Blade diameter: Φ350-Φ500mm
    Max, working dimensions: 3200*3200*100mm
    Workbench tilting degree:0-85°
    Workbench rotating degree:
    0-45-90-180-225-270-360°(anticlockwise)
    0-90-135-180-270-315-360°(clockwise)
    Water consumption: 3.5m³/h
    Main motor power: 15kW
    Gross power: 20.2kW
    Dimension(L*W*H): 6000*5000*2600mm
  • SZQJ-600 Infrared Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $17000-18000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine is composed of the Crossbeam, longitudinal rail boxes, conductors, lifting cylinders, side beams and cement foundation.
    Using laser instrument, Italy imported magnetic scale, microcomputer PLC. The machine is full automation and easy to operate, the work efficiency also improved. There are 4 models of this machine SZQJ-400/600/700/800.
    The worktable can be rotated for 45, 90 and 360 degrees, a variety of rotation methods.
    The main motor power can be selected from 15KW, 18.5KW and 22KW. It is available as an option. It meets the cutting requirements of large-size plates on the market.
  • SZQJ-700 infrared bridge cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $18000-19000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine is composed of the Crossbeam, longitudinal rail boxes, conductors, lifting cylinders, side beams and cement foundation.
    Using laser instrument, Italy imported magnetic scale, microcomputer PLC. The machine is full automation and easy to operate, the work efficiency also improved. There are 4 models of this machine SZQJ-400/600/700/800.
    The worktable can be rotated for 45, 90 and 360 degrees, a variety of rotation methods.
    The main motor power can be selected from 15KW, 18.5KW and 22KW. It is available as an option. It meets the cutting requirements of large-size plates on the market.
  • SZQJ-800 infrared bridge cutting machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $18000-19000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine is composed of the Crossbeam, longitudinal rail boxes, conductors, lifting cylinders, side beams and cement foundation.
    Using laser instrument, Italy imported magnetic scale, microcomputer PLC. The machine is full automation and easy to operate, the work efficiency also improved. There are 4 models of this machine SZQJ-400/600/700/800.
    The worktable can be rotated for 45, 90 and 360 degrees, a variety of rotation methods.
    The main motor power can be selected from 15KW, 18.5KW and 22KW. It is available as an option. It meets the cutting requirements of large-size plates on the market.
  • Bridge Cutter - Eco 600
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $13000-18000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    The Eco 600 has the same functions as the other model Basic600, but there are diferences in machine confguration. It is an economical machine with a very afordable price.
    It is the stone company’s key machine normally used in the cutting of large-size slabs. The Eco 600 cuts slabs of a maximum size of 3300×2000mm and a maxi-mum thickness of 150mm. The worktable tilts 0 to 85 degrees and rotates 90 degrees. The up and down movement is hydraulic, by means of 4 pcs of Chrome Plated Cylindrical. PLC control system with a touch screen. On request, the steel side legs and concrete walls are available.
  • QSZQ-1200 Medium Bridge Stone Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $20500-21500

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine uses hydraulic lifting system (or screw lifting system).It uses inverter to control left-right feeding, it can adjust the cutting speed according to the stone material hardness. Main spare parts adopt imported good quality materials. Main power: 22 KW, Max diameter of blade: 1400mm; Thus the whole machine is featured as high cutting efficiency, high stability, easy- operating to suit products.
  • QSZQ-1400 Medium Bridge Stone Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $21500-22000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    This machine uses hydraulic lifting system (or screw lifting system).It uses inverter to control left-right feeding, it can adjust the cutting speed according to the stone material hardness. Main spare parts adopt imported good quality materials. Main power: 30 KW, Max diameter of blade: 1400mm; Thus the whole machine is featured as high cutting efficiency, high stability, easy- operating to suit products.
  • YTQQ-500/600 Mono-block Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    High efficiency for cutting slab & tile, flexible, accurate and reliable. With the mono-block structure, installation is not necessary for this machine, and it brings much convenience to users.
    Feature
    * Mono-block structure, side beams are fixed on the steel, solid and stable.
    * Equipped with infrared device for precise cutting location
    * Wide crossbeam of bridge structure for large size of slab cutting and it is made of strong cast iron to avoid distortion after long-term use.
    * Guide rail on the crossbeam is in oil bath and it is protected from water and dust
    * Dustproof design of the slide track ensures the precise guide movement & long lifespan
    * Vertical movement of machine head is driven by accurate hydraulic system, and the stroke is adjustable
    * Cross movement of the machine head on the crossbeam is driven by motor equipped with OMRON rotary encoder by which the precision is guaranteed
    * The crossbeam is installed on the side beams by lineal guide track that results in less friction force and provides better flexibility and reliability
    * Worktable can tilt 0-85°
    * The blade head can rotate 90° by hydraulic system to cut the other side of slab without turning its direction
    * Equipped with PANASONIC frequency transducer and PLC, programmable and fully automatic
    * Touch-sensitive operating system, friendly human-machine interface design
  • SNM-DEI Heavy Duty Monoblock Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Artificial Stone, Sandstone, Travertine

    Machinery Function Features:

    The SNM-DEI is a heavy duty monobloc bridge cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite. Cement etc... it is easy to handle and maintenance free.
    The main structure is made of heavy duty steel in order to ensure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates which are machined on five sides.
    The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
    The placement of slide ways is quick and expensive and enables this machine to keep its accuracy indefinitely.
    Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
    The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0 to 45
    The forward and return movement of the head is powered by a brushless AC motor with inverter.
    The machine is equipped with end stops both forward and reverse as well as up and down.
    The driving system inside gears is case hardened before final grinding.
    The machine is equipped with an insulated electric panel as well as an articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, and a potentiometer to control the advancing speed for both cutting directions.
    The electric and tubes for tool cooling are supported by nylon cable holding chains.
    All components are mass-produced, safe and of high quality.
  • Sharp- RHINO Designed Bridge Saw Machine- Bridge Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    Automatic mitre strip cutting / 90 degree cutting head rotation / 360 degree work table rotation / 85 degree tilt table
    Features – Precise cuts – Our RHINO designed Bridge Saw also comes with Mitre-Cut for when you require 45 degree cuts – X and Y axis 90 degree rotation – Features a turntable work table that can also tilt up to 85 degrees
  • XZQJ-800 Tiltable Bridge Stone Cutting Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $25500-26000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

    Machinery Function Features:

    laser stone cutting machine It uses PLC system and human-machine interface,combined with high precision magnetic ruler to locate and infrared device,uses inverter to control left-right feeding,adjusts the speed according to the stone material. It use hydraulic lifting system,main electric parts adopt imported good-quality materials, the head can rotate 0-45 degree with a wide using range. Thus the whole machine is featured as high cutting efficiency,high cutting precision,high stability,easy-operating to suit granite and marble.
  • Infrared Laser Bridge Cutting Machine Bridge Saw Machine
    favorites
    Add To Compare

    Type: Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine

    $24000-28000

    Warranty: 12 Months

    Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Sandstone, Travertine

    Machinery Function Features:

    1. The blade can be tilted 45°and chamfer the edge.
    2. Bridge structure with wide crossbeam, large size of slab cutting available.
    3. Equipped with infrared device, precise cutting location reachable.
    4. Dustproof design of the slide track ensures the precise guide movement & long lifespan
    5. PLC control system, programmable, fully automatic & smooth cutting
    6. Precise movement of head in X, Y, Z directions by rack & gear
    7. Electric parts of Japanese famous brand adopted, reliability guaranteed
    8. Touch-sensitive operating system, friendly human-machine interface
    9. Worktable can be automatically rotated 90°or 360°, flip 85°,which make loading/unloading and changing the cutting direction easier.

Have a Question? Ask our expert

FAQ icon
Ask now
Clear All
Compare (0/4)
StoneContact
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!