Cutting Blades

Thin Veneer Saw Mighty Stone Saw Cutting Machine With Dual Blades

$12,500 - $16,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

VS series thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistency, efficiency, and reliability. There are two model:30HP&60HP

Single Arm Multi-Blades Stone Block Cutting Machine (SDC-1600)

$29,000 - $31,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Arm Block Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SDC-1600 Single Arm Multi-Blades Stone Cutting Machine uses large span of four guide column structure, host rigidity, high cutting efficiency, greatly improved blade life and lower power consumption, meanwhile guide column using oil lubrication, with better lubrication, more convenient maintenance; especially according to the stone worse environment to design the multi-layer modular sealing device, with waterproof, dust-proof and anti-spill, improve the using life of the machine; quarry table us

Automatic Three Heads Multi Blades Mosaic Cutting Machine

$5,000 - $20,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Automatic three heads multi blades mosaic cutting machine 1. The bearing in bearing box is use water-cooling device to make the bearing not hot after long time use, Delay the bearing is life. 2. Use high quality bearing supporting the front and behind of the main shaft to make the shaft drive with more high precision. 3. Add manual adjust device in the operative panel to make is driver it more easy. 4. Gantry type） structure make the machine drive steady with low failure rate.

Irregular Stone Splitting Machine With Side Blades

$10,000 - $50,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Hydraulic Splitting Machine for Natural Stone It's specially designed for splitting big blocks. Due to their big splitting power and long blade, these 3 models can easily split any big rock blocks into big and regular building stone kerb stone and wall stone

Gang Saw Machine with 80 Blades

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Gang Saw Machine with 80 Blades

Automatic Multi Blades Mosaic Cutting Machine

$10,000 - $20,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Can customize one shaft/two shaft/three shaft. and 300mm/400mm/600mm/800mm working width. if 1000mm or up to 1000mm please choose Gantry type it will Stable production.

Automatic Multi Blades Mosaic Tile Cutting Machine

$6,000 - $12,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Can customize one shaft/two shaft/three shaft. and 300mm/400mm/600mm/800mm working width. if 1000mm or up to 1000mm please choose Gantry type it will Stable production.

Automatic Multi Blades Tile Marble Stone Strip Mosaic Cutting Machine

$15,500 - $20,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Can customize one shaft/two shaft/three shaft. and 300mm/400mm/600mm/800mm working width. if 1000mm or up to 1000mm please choose Gantry type it will Stable production.

Breton DUOBRETON AEG Continuous splitter for marble with horizontal circular blades

Type: Stone Factory Machines › Stone Slab Cutting Machines › Multi Blade Automatic Slab Cutting Line

Warranty: 12 Months

Usage: Granite, Marble, Limestone

Machinery Function Features:

In the Duobreton AEG splitters, the marble billets are sawn horizontally in two parts by means of a series of diamond circular blades with increasing diameter. The horizontal diamond blades are mounted sequentially and in parallel position. The high-speed, precise splitting is guaranteed by the correct advancement of the billets, which are kept in contact with the conveyor belt by a series of vertical pressure units, as well as by the perfect vertical and transversal alignment of the diamond bla

OZKM80 80-Blades Gangsaw Block Cutting Machine, Multi Blade Gang Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Özteknik Makine manufactures OZKM80 gang-saw, equipped with maximum 80 diamond blades, to transform a stone block to many slabs simultaneously and efficiently. Özteknik Makine’s OZKM80 gang-saws employ components that are carefully designed to transfer the movement to the blade rack, flywheel and the connecting rods. The 3.5 meter flywheel is of cast iron, and guarantees a constant cutting speed. Flywheel drive shaft, produced from steel, and two cast iron supports and two spherical roller beari

gang saw machine for marble block cutting 80/100 blades

$68,000 - $87,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Marble

Machinery Function Features:

Diamond frame saw, also known as diamond gang saw, marble frame saw, diamond saw, is sawing Medium, soft and hard marble blocks, sandstone, synthetic stone, etc. to obtain high-efficiency processing equipment for large plates, is one of the two mainstream equipment for the production of stone slabs.

bridge multi blades block cutting machine

$22,000 - $25,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

machine adopts PLC programmable control and man-machine interface, supplemented by ultra-high-precision rotary encoder for sharding. The left and right passes are controlled by frequency converter. The speed can be adjusted according to the material of the stone. The lifting up and down adopts hydraulic lifting, before and after sharding. It adopts high-precision screw nut transmission, automatic sharding, and imported high-quality spare parts for key parts. The blocks can be placed directly on

GL3 CN2 Multispindle 5 Blades Automatic CNC Cutting Center

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MULTISPINDLE CNC CUTTING CENTER The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single. For high production sawing up to thirteen axes. Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°. Independent tool wear control and compensation for each blade. Accurate and fast thanks to brushless motors and to linear bearing guides. Extreme precision

QUADRA G15 1600 / QUADRA G32 1600 Automatic Electronic Block Cutter for Granite With Max. 32 Blades

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Basalt, Quartzite

Machinery Function Features:

FEATURES Max blade size of 1600 mm (63 in). Up to 1200 mm of diameter, 32 blades can be mounted, for diameters ranging from 1300 to 1600 the following treatment is used: from 13 blades of maximum diameter 1100 mm and from 13 with diameter ranging from 1300 to 1600 mm. Protections all made of stainless steel for a long-lasting life. Attachments on request: - inverter, electronic variator of the speed of rotation of the vertical blades (400-800 rpm) and of the horizontal blade (1400-2000 rpm) for

3 Blades Thin Stone Veneer Saw

$35,000 - $36,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1. High-efficiency cutting with multiple saw blades, doubling production capacity The machine is equipped with three diamond saw blades that can operate simultaneously, enabling precise cutting of slabs such as sandstone, limestone and decorative stone in a single pass. Compared to single-blade machines, this significantly enhances production efficiency and is particularly suited to the processing of large volumes of thin stone slabs. 2. Wide processing range, flexibly accommodating various spec