Stone Cutting

Bidese Impianti- Poker CNC Diamond Wire Shaping and Squaring Block Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Developed Software which allows easy programming without requiring the presence of the operator during operation. The diamond wire operated motor which controls the inverter, for a change in the speed of the wire if needed. CAD-CAM allows to create the working file and to convert it in the machine language for the working execution.

Bridge Saw-BS900

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Bridge saw BS900 suited for processing sandstone, limestone, marble and granite. Peripherical speed: steplessly regulated by frequency regulator Bridge length 3.5 m Rise and fall 450 mm by means of short circuited motor Programmation: For fully automatic sawing, PLC with operator panel which is suited for adjusting; One strip width The number of strips The loss due to sawing The saw head can be rotated 90 degrees in horizontal plane, electrically driven. There is also a possibility for profiling

Simec SW 1200 High Performance Mutli-Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SW-1200 is a stationary multi-wire machine directly derived from the larger SW2000, with which it shares most of the technology solutions, but which is characterized by the useful cutting width reduced to 1200mm and for the smallest number of usable wires.

Polywire 20 Multiwire with 20 Wires Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Polywire 20 Multiwire with 20 wires to obtain slabs of different thicknesses in the same cut.. Multiwire saw with a big multi-groove drum (2.35 mt diameter) on the motor side and twenty big independent tensioning flywheels (2 mt in diameter), each tensioned by the patented Multipull system to manage at best the cutting conditions and optimize the life of the diamond wires. The plant is complete with a multi-groove guide drum (0.6 mt diameter) on the tensioning side to ensure further cutting prec

waterjet cutting machine 3axle /5axle

$47,000 - $48,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

It consists of ultra-high pressure pump, PC controlled CNC machine tool, CNC computer cabinet and so on. Can be used to cut a variety of materials, such as glass, ceramics, stainless steel, aluminum, stone, leather and other soft and hard materials. It has the advantages of fast cutting speed, high precision, narrow slit, smooth cut, no heat deformation, environmental protection and dust-free, and can directly punch and cut the knife at any position.

Bidese Impianti-CNC Polar Junior Artistic diamond wire machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Polar Junior is made to cut the stone in various designs, for artistic purposes. Artistic diamond wire machine with vertical direction of the wire and a bench on which moves the material to be processed. Metal construction, which receives the appropriate heat and corrosion treatment. It is suitable to any working situation.

SIMECWIRE/01 MOB Monowire Plants For Cutting And Squaring Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SIMECWIRE/01 –MOB, besides having the same characteristics of the stationary version, it has the possibility to translate on tracks, thus turning out to be especially suitable to cut slabs. The transmission of the movement on tracks is obtained by a precise pinion-rack system controlled by brushless motors and encoders on both sides, as it takes place on the most precise tool machines. For squaring blocks, the machine can be equipped with a rotating trolley.

Robot Wire 1600-2600 Cutting Profiling Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

CNC system with 4 controlled axes for two dimensional profiling of marble, granite and other ornamental stone blocks, usiing diamond wire; can also be used for block dressing and slabbing.

New Monolame Block Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Maveco has developed and builed a brand new Monolame to coop with the demand of higher blocksize and capicity. The Monolame is suitable for cutting various kinds of natural stones like sandstone, limestone and marble. A block is placed on a sawing car and after this the Monolame cuts the stones in the desired formats.

SIMEC M40 –M50 Open Frame Gangsaws for Marble Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

SIMEC M40 and M50 are open frame rectilinear motion gangsaws for the sawing of marbles and/or engineered marbles. These machines are the result of SIMEC’s great experience in manufacturing gangsaws, with thousands of marble gangsaws all over the world, and in the utilization in the most modern CAD technologies, that allow a precise calculation of the efforts sustained by each single piece.

Bidese Impianti-Top Wire Junior CNC Diamond Single Wire Shaping Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Artistic diamond wire which creates straight or curved surfaces by combining two axes of flexibility for the machine. Developed Software which allows easy programming without requiring the user's presence during operation. The diamond wire operates with a motor controlled by inverter, for a possible change in the speed of the wire if needed. It also has CAD-CAM program to convert the file into an executable form.

Super 240T Frame Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Closed Frame Gang Saw

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

SIMEC Maxi 3000RX MOB Maxi 3500RX MOB Block Sawing Machines With Giant Disc

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

The working centers MAXI RX MOB offer high precision requisites thanks to the translation system of the cutting bridge made with interchangeable steel “V”slides of high resistance, that can also be ground, as well as the precision motors and reducers, synchronized by encoder on each column. Once the machine places itself on the cutting point, it locks its position as to avoid vibrations and accidental movement.

Benetti Fast 735 Diamond Belt Stationary Machine for marble and soft stones

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Diamond Belt Stationary Machine The Diamond Belt Stationary Machine is a patented machine with exceptional quality and speed performance while cutting. Fast 735 Special stationary machine for marble and soft stones thick slabs cutting and blocks squaring. Special stationary machine for marble and soft stones thick slabs cutting and blocks squaring. The tool is a sintered diamond belt that runs without friction on a double guide thanks to a water film (aquaplaning system) and a 45 kW electric mot

Polywire 5/34 Diamond Wire Saw for Marble,Granite

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

Polywire 5/34 multi diamond wire saw for marble,granite blocks Stationary multiple diamond wire saw to cut up to 34 slabs at the same time. Complete with a PLC and CNC system.

Circular Sawing Machines-Centaur

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

The Centaur is circular sawing machines which are suitable for sawing plates and slabs of marble and granite or comparable materials. Saw movement manual. Height adjustment 300 mm with short circuit armature motor.

Benetti Fast 736 Diamond belt saw for trimming of blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Diamond belt saw model FAST 736 for trimming of blocks of marble and stoneSpecial cutter for slabbing blocks of marble and other stones except granite.The tool consists of a diamond belt moving frictionlessly within a double guide through a water bed eliminating friction.The belt winds around two supporting pulleys Dia. 1700 mm and it is driven by a 45 Kw. motor.The belt tensioning is produced by means of an automatic hydraulic system.The downfeed is controlled by means of hydraulic system which

Pedrini GS 122 Multi-blade, open square frame gang-saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This machine, that was designed for the quick sawing of marble irregular blocks, synthesizes extensively experienced technical solutions that have been realized through Pedrini most advanced technology. GS 122, that is manufactured in the versions for 30, 40 and 50 blades, is a gang saw with superior characteristics regarding the perfect dynamic balance and the extremely rigid structure that allows for blades stack considerable width extension with the use of the maximum tension. Owing to their

Polywire 5/16 Multiple Diamond Wire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Polywire 5/16 Stationary multiple diamond wire saw Stationary multiple diamond wire saw to cut up to 16 slabs at the same time, in marble or granite. The machine is controlled by a computerised system with a PLC.

Pedrini Jupiter GS 200 is an open frame multiwire machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Multiwire Jupiter GS 200 is an open frame multiwire machine for the production of slabs that performs blocks fast cutting through a set of diamond wires. Multiwire Jupiter GS 200 exhibits the following fundamental features: precise - structural rigidity, dynamic balancing, accuracy in displacing & sliding hi-tech machine - advanced patents, unique reliable - simple technical solutions, no risk functional - optimization of the yield of the diamond tool versatile - many available models (8, 16, 32

Ariadne Diamond Wire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Diamond wire saw for sawing square blocks of natural stone and for sawing blocks into slab of any thickness Number of wires 1 Stationary bridge 30 tons load capacity CNC control/ profiling is optional

DIAMANTFIL 2350 Double Top Wire Gangsaw

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

DIAMANTFIL 2350 DOUBLE TOP It's a wire gangsaw with two independent diamond wires through which it' s possible to cut slabs with thicknesses between 2.1 cm and 60.1 cm. The thickness variation is electrically operated and it s possible to program either the number of cuts and the thickness variation between one cut and the following one.

Robot Space 2600 CNC Diamond Wire Profiling Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Robot Space 2600 CNC system with 6 controlled axes for two and three dimensional profiling of marble, granite and other ornamental stone blocks, using diamond wire. Maximum cutting length : 2,6 m Maximum cutting height : 1,70 m Installed power : 27 CV Linear speed of diamond wire : 0 ÷ 40 m/sec Length of diamond wire : 15,5 - 16,6 m Rotation of block bearing trolley : 360° Weight : 10 T Shipping volume : 50 m3

5 axis CNC Bridge Saw BK5

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone

Machinery Function Features:

available with 4 or 5 axis This machine is a fully interpolated 4 or 5 axis bridge saw with automatic tilting 0° to 90° (BK4 head titled 0°to 45° manually). The first “green” machine in the stone market, “green” standing for: Energy efficiency, Quality, Durability, Costs. The BK machines do the same job and more of a traditional bridge saw with only 25% of the energy. They are 30% the size of a traditional bridge saw, but keep or exceed the same working area; The X axis of the BK machine is move

Pentawire Multiwire Machine to Cutting Slabs

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

Machine to cut slabs, for up to 5 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).

Polyone 20 Multiwire Stone Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

POLYONE Multiwire Marble, Granite Block Cutting Machine Multiwire suitable to realize 20 cuts of 1 cm thickness in the same drop. The other thicknesses which can be obtained are 2, 3 cm and more.

COMPACT LINE 1 - AUTOMATIC CUTTING AND EDGE-PROFILING LINE FOR CERAMIC, MARBLE AND STONE

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The new automatic line, called COMPACT LINE, has been designed for multi-blades cut and edge-profiling of material. It is made of compact dimension and easy machines and it allows to realize some qualitative productions with a minimum space and operators, alsonot skilled, for its simple use. The machines have a system of water recycling to refrigerate the tools through an under-water pump inside the tank that contains water. The automatic line is made of: - TMC Multi-blades cutting machine - DSA

COMPACT LINE 2 - AUTOMATIC CUTTING AND EDGE-PROFILING LINE FOR CERAMIC, MARBLE AND STONE

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The new automatic line, called COMPACT LINE, has been designed for multi-blades cut and edge-profiling of material. It is made of compact dimension and easy machines and it allows to realize some qualitative productions with a minimum space and operators, alsonot skilled, for its simple use. The machines have a system of water recycling to refrigerate the tools through an under-water pump inside the tank that contains water. The automatic line is made of: - TMC/2 Multi-blades cutting machine - D

COMPACT LINE 3 - AUTOMATIC CUTTING AND EDGE-PROFILING LINE FOR CERAMIC, MARBLE AND STONE

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The new automatic line, called COMPACT LINE, has been designed for multi-blades cut and edge-profiling of material. It is made of compact dimension and easy machines and it allows to realize some qualitative productions with a minimum space and operators, alsonot skilled, for its simple use. The machines have a system of water recycling to refrigerate the tools through an under-water pump inside the tank that contains water. The automatic line is made of: - TMC/3 Multi-blades cutting machine - D

GREEN LINE - AUTOMATIC CUTTING AND EDGE-PROFILING LINE FOR CERAMIC, MARBLE AND STONE

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The new automatic line, called GREENLINE, has been designed for multi-blades cut and edge-profiling of material. GREENLINE is the optimal solution to achieve quality productions with high productivity, while reducing tool costs, energy and water consumption.

COMPACT LINE SQUARE - AUTOMATIC CUTTING AND RECTIFYING LINE FOR CERAMIC, MARBLE, STONE AND BRICK

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The new automatic line, called COMPACT LINE, has been designed for multi-blades cut and rectifying of material. It is made of compact dimension and easy machines and it allows to realize some qualitative productions with a minimum space and operators, alsonot skilled, for its simple use. The machines have a system of water recycling to refrigerate the tools through an under-water pump inside the tank that contains water. The automatic line is made of: - TMC/2 Multi-blades cutting machine - DSA S

MFL STRADORA CNC - BIG SIZES DRILLING, MILLING AND CUTTING MACHINE

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

MFL STRADORA CNC is a modern monobloc bridge saw with rotating and tilting head and hot zinc coated frame for an exceptionally long lasting sturdiness and anticorrosion. It features 5 interpolated axes travelling on steel guideways with revolving balls and steelbands with revolving rollers protected by bellows and lubricated by a centralized system. The axis movement is powered by a brushless motor of high precision. The 0°-90° tilting head and 0°-360° rotation (+/-3° extra ) ensure a highly pro

MTQ 3200 - AUTOMATIC CUTTING MACHINE SQUARE FOR LARGE-SIZE SLABS

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MTQ 3200 - AUTOMATIC CUTTING MACHINE SQUARE FOR LARGE-SIZE SLABS

SIMEC RAF 650 Longitudinal Cutting Machines for Strips

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Longitudinal cutting machines, very sturdy and reliable that can cut strips wide up to 50 mm (60 RAF). These longitudinal cutting machines are available in manual or sequential versions. Spindles fitted are 1 to 3 and can cut thickness up to 40 mm for granite and 60 mm for marble in a single pass.

MTL - BIG SIZES CUTTING MACHINE

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MTL is supplied with roller for support of slabs, 2 adjustable stops (front and side), set of service wrenches. OPTIONAL: extra roller tables, laser cutting marker, mechanical square.

SIMEC TT 2200 RS Transversal Cutting Machine for Slabs

Type: Stone Factory Machines › Stone Slab Cutting Machines › Multi Blade Automatic Slab Cutting Line

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Transversal cutting machines for slabs with maximum size of 2200x3500 mm, available in marble, granite and marble/granite versions. The TT2200 RS machines can be supplied in manual, sequential, simultaneous versions. The TT2200 RS machine uses discs of 350 mm in diameter and is fitted with 7.5 kW power spindles.

Simec TL 2200 RS Longitudinal Cutting Machine for Slabs

Type: Stone Factory Machines › Stone Slab Cutting Machines › Multi Blade Automatic Slab Cutting Line

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Longitudinal cutting machines for slabs with maximum size of 2100x3500 mm, available in marble, granite and marble/granite versions; manual, sequential, simultaneous versions. The machine can cut thickness up to 60 mm for marble and 40 mm for granite and can be fitted with 7 spindles maximum (10 spindles can be used for cutting 20 cm strips)

Prussiani Champion 65 CNC BRIDGE SAWS

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

VERSIONS CHAMPION 65 / TFG - fixed table CHAMPION 65 / TPG - partial tilting table CHAMPION 65 / TLG - table with tilting levers CHAMPION 65 / TCG - completely tilting table CHAMPION 65 / CL - side loading CHAMPION 65 / NT - conveyor belt automatic centralized greased lubrification. In case of anomalies the machines stops; watertight IP 55 electric cabinet with safety thermostat; sound power level: 80 ÷ 90 dB(A).

TL 2200 RS PM Longitudinal Cutting Machine for Slabs with Mobile Bridge

Type: Stone Factory Machines › Stone Slab Cutting Machines › Multi Blade Automatic Slab Cutting Line

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

This cutting machine with mobile bridge allows to cut in several passages and is especially suitable for cutting thick pieces or very hard material

Simec TLS 2200 RS Longitudinal Cutting Machine for Thick Slabs

Type: Stone Factory Machines › Stone Slab Cutting Machines › Multi Blade Automatic Slab Cutting Line

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This machine has been designed as a longitudinal cutting machine for thick slabs of marble or granite, wide up to 2200 mm. The TLS 2200 machine is available in the sequential or simultaneous version up to 9 spindles. It is equipped with very powerful motors(15 kW) that can cut very deeply in a single pass, up to 50 mm on granite and 150 mm on marble.