Quarry diamond wire saw machines are practical wire cutting machines designed to be used in marble, limestone, sandstone, granite quarries. Of course, in order for this machine to be used, the location of the quarry is as important as the hardness of the stone to be removed from the quarry.
The fact that the machine is not too heavy provides ease of relocation.
These machines are sometimes used to cut the stone from the quarry as blocks, and sometimes to cut the edges of the removed stone blocks into a standard shape.
In addition, these machines can be used for cutting large concrete masses in various construction projects or demolition works.
The advanced design and manufacturing technology applied, the diamond wire saw machines are suitable for opening granite, marble and sandstone quarries. The quarry wire saw machine head can be adjusted and rotated automatically. Vector frequency converters are equipped to ensure stable torque output. The feeding speed can be adjusted automatically by the constant tension control system. The setting is fixed, so the cutting condition always remains optimum. The operation panel can be wire-controlled and remote-controlled, the monitor can display instantaneous current, feed rate and cutting data.
1. Adopt new design of gearbox reducing the down time and facilitating,maintenance which ensures the lifetime is longer than counterpart. 2. Diverse configuration with intelligent, automatic and remote features to work under frozen/hot temperature or high altitude area. 3. Ergonomical and user-friendly design make it easy for operator to run the machine. Remote and cable control are both available for your choice.
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Cinsi / Engine Type Elektrikli / Electricity Motor Gücü / Motor Power 30 kw 40 hp, 380 v 1500 dev/dk (Rpm) Yürüyüş Sistemi / Movement System Redüktörlü Otamatik Hız Kontrolü Automatic Speed Control with Reducer Kullanılacak Tel / Wire Type Elmas / Diamond Kesme Hızı Saat / Cutting speed (Hour) 8-9 m Yüzey / Surface / Per Hour Tel Çevirme Kapasitesi / Wire Rotating Capacity 45-50 m Kasnak Çapı / Pulley Diameter 60 cm Ağırlık / Weight 830 kg Şase
1.Controlled by inverters and PLC industrial control module, the moving speed of the machine can be adjusted automatically with the changes of the cutting force so that the diamond wire saw be in the best cutting condition all the time. 2.The lateral moving and the rotation angle of the cutting head are controlled and driven by electric motor,which enables the machine to work normally under harsh circumstance with moisture and dust. 3.The machine can be operated manually and automatically. 4.The
1. Using frequency converter + PLC control, the motor can be stepless speed regulation 2. Using digital communication, the control circuit is simple and the failure rate is low. 3. Control panel is fixed HMI screen. It's waterproof and dust-proof, which also has dynamic display images and working information, like input voltage, cutting data and working time. 4. Intelligent fault detection of equipment system, alarm protection and prompt solutions, timely treatment,user friendly 5. Using PID tec
This machine adopts double inverter stepless speed regulation, while cutting,it can achieve constant tension wire cutting process and automatic control, automatic control system can be realized according to the speed of walking machine change science to adjust the load, which is always in the best working state of diamond wire.
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Cinsi / Engine Type Elektrikli / Electricity Motor Gücü / Motor Power 18,5 kw, 25 hp, 380 V, 1500 dev/dk (Rpm) Yürüyüş Sistemi / Movement System Redüktörlü Otamatik Hız Kontrolü Automatic Speed Control with Reducer Kullanılacak Tel / Wire Type Elmas / Diamond Kesme Hızı Saat / Cutting Speed (Hour) 8-9 m Yüzey / Surface / Per Hour Tel Çevirme Kapasitesi / Wire Rotating Capacity 30 - 35 m Su İhtiyacı Saat / Water Consumption (Hour) 200 lt / Hour K
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 9 Months
Usage: Granite, Marble, Onyx, Basalt, Travertine
Machinery Function Features:
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Cinsi / Engine Type Elektrikli / Electricity Motor Gücü, Voltajı, Devri / Engine Power, Voltage, Revolution 20 / 25 hp, 15 / 18 kw 380 V 1500 dev/dk (Rpm) Yürüyüş Sistemi / Movement System Makaralı (El ile) / with Roller (with Hand) Makinanın Hareket Şekli / Machine Movement Type Yıldız Üçgen Yol Verme / Star Triangle Connection Kullanılacak Tel / Wire Type Elmas / Diamond Kesme Hızı Saat / Cutting Speed (Hour) 3-5 m Yüzey / Surface / Hr. Tel Çe
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Gücü / Engine Power 55 Kw (75 hps) 1000 dev/dk (Rpm) 380 volt Yürüyüş Sistemi / Movement System 1.1 KW 2 hp Turbo Beyin Kontrollü / Turbo Intellegence Controls Makine Kontrolü / Machine Control Kablolu Uzaktan Kumanda / Remote Controller with cable Elektrik Motor Kalkış Sistemi Engine Starting System Hız Kontrollü / Speed Controller Kesme Kapasitesi / Cutting Capacity 18-28 m2/ Saat Mermer Sertliği ve Elmas Tele Göre Değişir 18-28 m2 / Hour Chan
Let's think about the construction machinery work machinery first diesel engine by running the engine and the whole load is transferred to the hydraulic system hydraulic engine in our hydraulic machinery, leaving the whole engine to the hydraulic system It offers more strong ropes than the machines in its own group. Since it is hydraulic system, it offers cutting possibility at desired speed. Between 0-1200 cycles. Marble-Granite-Basalt-Travertine Due to the hydraulic system, electrical engine c
Ref.: 49 Standard Diamond Wire Machine for cutting benches with a diamond wire. Reduced power consumption at start-up. Automatic stop at the end of cutting and if the wire breaks. Automatic adjustment of cable tension. Wheel easy to remove to replace rubber. High cutting speed and easy to assemble. Can be used in serial block cutting. Data management and storage.
Ref.: 52 Tracked Extensible Wire Diamond Machine for squaring (to transform mass into blocks). It has Allows the cutting of masses in less time. It is self-propelled, moves on tracks and is easily positioned by the operator. The hydraulic levelling system allows the operator to quickly adjust the start of the cutting process. Does not require a rail. Reduced costs compared to the traditional method. Horizontal adjustment to bench size. Data management and storage. The machine of the future.
TD 25 Diamond wire saw for block dressing and small cuts in the quarry. This is the smallest and most manageable machine. The 18 kW GB 6-pole main motor drives a 60 cm flywheel and can be rotated mechanically over 360° for cuts at any angle. OPTIONAL: inverter on a mobile control panel for variable wire speed (0-30 m/s)
TDD 100-120 Super Diamond wire saw with a Diesel engine and a hydraulic converter to cut benches of any size in marble and/or granite. Machine designed for large quarry cuts. The Diesel engine (VM, 4 cylinders, 90kW, air-cooled) is connected GB to the main aluminium flywheel Ø 102 cm through a hydraulic converter and an orthogonal gearbox. The gearbox unit can rotate 360° and can be shifted across the machine on chromed guides to allow two parallel cuts to be made at adjustable distance. Two ele
Strong, compact and easy to use machine, manufactured with a special steel frame connected to the flywheel rotation group. It is designed to perform large primary cuts and block squaring on marble, granite and abrasive stones. The model with vectorial inverter control system allows to vary the diamond wire speed from 0 to 40 m/sec. The machine moves on rails by means of rack/pinion system. The feed system consists of a super card device, that allows a constant tension and control of the diamond
800mm Aluminum Flywheel for Wire Saw Machine The 800mm aluminum flywheel is specially designed for wire saw machines used in stone quarrying and block cutting. Made from high-quality aluminum alloy, it features lightweight construction, excellent balance, high strength, and strong wear resistance. The rubber-lined groove provides stable wire movement and helps reduce vibration during operation, improving cutting efficiency and extending the service life of the diamond wire. Customized flywheels
75 HP (55 KW ) WIRE SAW MACHINE COMPANY NAME KNMBM INTERNATIONAL INTERNATIONAL STANDARD WIRE SAW MACHINE MOTOR RUNING ON A STANDARD 3 PHASE 415 V SUPPLY THE ELECTRCAL WIRING AND CABLE SPECIFICATIONS REQUIEW A COPPER CONDACTOR 25MM TO 35 MM PER PHASE IEC 60228 FOR THE CONDUCTORS AND IEC 60204-1 FOR MACHINE ELECTRIC SAFETY 1 FULLY AUTOMATIC MACHINE 2 HIGH CUTTING EFFICIENCY 3 SMOOTH & STABLE OPERATION 4 PRECISE CUTTING CONTROL 5 LOW MAINTEANCE 6 BUILT FOR MARBLE & GRANITE
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 9 Months
Usage: Granite, Marble, Onyx, Basalt, Travertine
Machinery Function Features:
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Cinsi / Engine Type Elektrikli / Electricity Motor Gücü, Voltajı, Devri / Engine Power, Voltage, Revolution 20 / 25 hp, 15 / 18 kw 380 V 1500 dev/dk (Rpm) Yürüyüş Sistemi / Movement System Makaralı (El ile) / with Roller (with Hand) Makinanın Hareket Şekli / Machine Movement Type Yıldız Üçgen Yol Verme / Star Triangle Connection Kullanılacak Tel / Wire Type Elmas / Diamond Kesme Hızı Saat / Cutting Speed (Hour) 3-5 m Yüzey / Surface / Hr. Tel Çe
This machine adopts double inverter stepless speed regulation, while cutting,it can achieve constant tension wire cutting process and automatic control, automatic control system can be realized according to the speed of walking machine change science to adjust the load, which is always in the best working state of diamond wire.
The diamond bead wire saw for mining is an important piece of equipment used in the extraction and processing of stone materials. Its main feature is the use of diamond beads as cutting tools, which are linked together by a wire to form a cutting tool with high hardness and wear resistance. The working principle involves the high-speed rotation of the diamond beads making contact with the rock surface to achieve cutting.This equipment offers several advantages, including High cutting efficiency、
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Motor Gücü / Engine Power 55 Kw (75 hps) 1000 dev/dk (Rpm) 380 volt Yürüyüş Sistemi / Movement System 1.1 KW 2 hp Turbo Beyin Kontrollü / Turbo Intellegence Controls Makine Kontrolü / Machine Control Kablolu Uzaktan Kumanda / Remote Controller with cable Elektrik Motor Kalkış Sistemi Engine Starting System Hız Kontrollü / Speed Controller Kesme Kapasitesi / Cutting Capacity 18-28 m2/ Saat Mermer Sertliği ve Elmas Tele Göre Değişir 18-28 m2 / Hour Chan
Quarry diamond wire saw machines are practical wire cutting machines designed to be used in marble, limestone, sandstone, granite quarries. Of course, in order for this machine to be used, the location of the quarry is as important as the hardness of the stone to be removed from the quarry.
The fact that the machine is not too heavy provides ease of relocation.
These machines are sometimes used to cut the stone from the quarry as blocks, and sometimes to cut the edges of the removed stone blocks into a standard shape.
In addition, these machines can be used for cutting large concrete masses in various construction projects or demolition works.
The advanced design and manufacturing technology applied, the diamond wire saw machines are suitable for opening granite, marble and sandstone quarries. The quarry wire saw machine head can be adjusted and rotated automatically. Vector frequency converters are equipped to ensure stable torque output. The feeding speed can be adjusted automatically by the constant tension control system. The setting is fixed, so the cutting condition always remains optimum. The operation panel can be wire-controlled and remote-controlled, the monitor can display instantaneous current, feed rate and cutting data.
Ask a Question
Could not find the answer you need? Ask about Travertine Basalt Quarry Wire Saw.
Questions & Answers on Travertine Basalt Quarry Wire Saw
What are wire saw machines used for?View answer⌄
Asked by Visitor
Continuous type wire saws are used to cut walls and other large constructions and stone quarries. Continuous type saws are used to cut silicon wafers for the semiconductor and photovoltaic industry. Diamond-impregnated wire saws are used in machine shops to cut metal parts.
Can a wire saw machine cut through metal?View answer⌄
Asked by Visitor
Concrete wire sawing is used to cut through steel and reinforced concrete. Concrete wire sawing gives the most precise cuts on ridges, beams and piers when it comes to making openings in thick walls or removing large concrete structures.
A wire saw is an effective tool when it comes to cutting, but they use abrasion instead of saw teeth for cutting. When compared with other cutting methods, wire sawing offers significant advantages over other cutting methods in various applications
China
Turkey
Spain
India
Italy
Portugal
Greece
4YR
