If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Home ProductsStone MachineryStone Factory MachinesStone Finishing, Profiling MachinesCNC Working CenterTravertine CNC Working Center
Travertine CNC Working Center
( 125 )-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
automatic centralized greased lubrication. In case of anomalies the machine stops;
watertight IP 55 electric cabinet with safety thermostat;
sound power level: 84 ÷ 90 dB(A);
VERSIONS
DIAMANTE PLUS / Z350
DIAMANTE PLUS / Z650
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine
Machinery Function Features:
TOP MANUAL WORKING CENTER
MULTIPURPOSE MACHINE FOR COUNTERTOPS
All-in-one machine for countertops: sink cut-outs, shaping and polishing internal and external countours, drilling and performing recess drains.
ADVANTAGES
TOP multipurpose machine for kitchen countertops:
TOP is a multipurpose machine that allows the operator to do different jobs with only one machine with a reduced investment: sink cut-outs, shaping and polishing internal and external contours, drilling and recess drains;
All the job is performed without moving the piece;
Although it is a manual machine, it does the same job as a CNC working centre;
it does not require an experienced operator, anybody with a short training can work on this machine;
Ideal for a small or new factory minimizing investment, reducing production costs and time to manufacture the finished products;
It allows to create complete kitchen and bathroom countertops;
Possibility to use templates to create washbasins.
Achilli
Italy
Achilli s.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC working center with three interpolated axes, able to carry out workings, such us shaping, contouring and cutting on marble, granite, stone and quartz.
Is the ideal working center for the production of vanity tops, kitchen tops, tables, wash sinks, shower trays and bas-reliefs.
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
KSD 1 is a multifunction machine ideal to automate the process for the performance of pre-set systems for fixing of slabs, claddings and panels in marble, stone and ceramic for interior and exterior applications.
The 2 independent bridges system, each one equipped with 1 ISO 40 electro-spindle, allows to carry-out processing operation in parallel way so reducing production times. CNC technology and software grant sequential programming of different types of processing, so avoiding handling or manual works or processing by the use of machines.
The great flexibility is guaranteed by the conveyor belts: it widen and shrink automatically according on the width of the piece to be processed.
Maximum slab thickness 100 mm, minimum slab dimensions 210x210 mm and maximum slab dimensions 1500x2000 mm (width x length).
Slab processing can be carried-out in different ways:
Laterally to the slab: to perform holes, milling and built-in processes;
Above to the slab: to perform holes, reliefs, millings, rims.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC working center with three interpolated axes, able to carry out workings, such us shaping, contouring and cutting on marble, granite, stone and quartz.
Is the ideal working center for the production of vanity tops, kitchen tops, tables, wash sinks, shower trays and bas-reliefs.
Prussiani
Italy
Prussiani Engineering S.p.A.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
QUADRIX XL 1600 is a 5 interpolated axes CNC working centre with Z axis stroke of 1000mm, rotating blade head swiveling from 0 to +180 degrees and tilting from 0 to 90 degrees, to perform orthogonal cuts up to 635mm, ideal machine for performing oblique, circular, elliptical cuts, two-dimensional and three-dimensional digging and carving of blocks.
The "Top" version can use diamond tools such as: milling wheels, drill cores, horizontal blade.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The CAM for 3-axis stoneworking centres and/or lathes
Frestag is the CAM suitable for 3-axes stone-working centres and more in general for the stone industry. The non-interpolated lathe machining is supported as well.
Focusing on the user-friendly aspect, it does not need particular IT skills and can been used from all the operators indistinctly. The user interface (UI) acts as a wizard, leading the user during the processing steps and reducing the probability of making errors during the programming phase.
DRAWING AND DESIGNING
Starting with the 2D entities of Logotag it is possible to reproduce:
sinks, quarries and pockets
mouldings and handrails
shower plates and drips
columns
Depending on the piece to reproduce, the users select the entities from the X-Y plane of the drawing (TAG, DWG, DXF) to import for Frestag.
The graphic engine of Frestag is responsible for visualising the processing paths.
PROCESSES
Users can program different machining for:
3-axes profiles and contouring sections; roughing and polishing steps are available while tool sequences (e.g. 3 diamond tools + 3 polishing tools) allow the user to program the processes in few steps
quarry with a router bit and parallel or concentric passes
quarry with a blade tool and parallel passes
tapering for shower plates and similar
dripping for kitchen countertops
drilling
polishing
concave / convex machining
non-interpolated lathe
Taking this into account, if a specific part is to be made independently from the CNC machine, the functioning cycles are computed so that the software can be easily interfaced to multiple stone working centres. The post-processor translates all the processes in the proper language of the CNC to use to evaluate the CNC machine capabilities (e.g. automatic tool changer, rotating table, and aggregate head).
TOOLS
The tool database contains router bit (flat, bullnose, conical), shaped tools, blades, and aggregates.
Users can automatically or manually set the vacuums to lock the pieces.
Taglio
Italy
Taglio S.r.l.
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Travertine
Machinery Function Features:
QUADRIX DV 1100 is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 1000 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs.
The possibility to mount blade having max diameter of 1100 mm grants the possibility to cut up to 410 mm thickness .
QUADRIX DV 1100 allows to produce large dimensions items but also to perform extremely precise finishing; a high production is granted by the sliding system of X and Y axes on linear guides and racks both in oil bath lubrication. The motion is given by brushless motors coupled to high precision gearboxes. It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 50 type connection diamond tools, such as end mill, milling wheel and a horizontal blade.
The QUADRIX DV 1100 is suitable for those looking for a powerful and flexible machine; it can be set up as a simple machine for cutting or as a work center, complete with tool holder, automatic tool change and lathe for the performance of shower trays, sinks, window frames, frames, columns, claddings and products in general for furniture and building.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The ECHO 725 CNC is a 5/6 axis interpolated milling machine particularly flexible, suitable for the production of different types of products such as kitchen tops, bathroom tops, shower trays, engravings, bas-reliefs and various coatings for the building industry.
It is a machine that allows a wide range of processes, from cutting, to milling, drilling, shaping and, thanks to the countless accessories, it is possible to carry out these operations simultaneously without moving the piece from the bench or prolonged machine stops.
Thanks to the sliding of the X and Y axes that occur on linear guides with recirculating balls and racks both with oil bath lubrication and with the new structure of the bridge and the steel carriage, the ECHO 725 CNC allows to obtain products with extremely fine finishes precise.
ECHO 725 CNC is suitable for those in need of power, high output and small footprint. The different levels of customization of the machine make it possible to satisfy the most demanding customer requirements and this is made possible by the wide range of accessories available.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To CompareType: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
KRONOS is a 5/6 axis interpolated milling/work center machine with automatic tool change. It is available in the version with a Z axis stroke of 600 mm or with a Z axis stroke of 800 mm.
It is one of a kind machine as it combines the typical features of a milling cutter and those of a work center/contouring machine. The Parametrix software and the wooden overbench, allow to perform cutting operations as a traditional milling cutter; the KRONOS range, compared to the traditional working centers, is the sole solution offering specific software for simple and intuitive cutting. Without the overbench, the machine can be set up as a work center to process the piece directly on the aluminum bench or as a contouring machine, fixing the piece to the bench with the suctions cups kit supplied with the machine.
The machine allows to produce items with extremely precise finishing, thanks to the sliding system of X and Y axes on linear guides and racks both in oil bath lubrication. The motion is given by brushless motors coupled to high precision gearboxes. It is equipped with a series of electro-spindles controlled by inverter and it can be fitted with ISO 40 type connection diamond tools, such as end mill, milling wheel and a horizontal blade.
KRONOS is featured as a millling cutter and a work / contouring center, it is particularly suitable for all laboratories that want to increase their technological level in limited spaces.
Donatoni
Italy
Donatoni Macchine Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
$18000-20000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Stoneplus Panda1308 is a Mini CNC Work Center mainly to solve the problem of sink cut out.
It is the ideal machine to ease your work with extreme simplicity.
The cutting projects are designed by CAD.
It does counters profiling and polishing.
Drills, shapes and polishes.
Makes profiles and decoration stone.
Works on quartz, porcelain, granite, marble and all other stone.
Cuts out sinks of square, round, oval and all shapes.
Cuts the counters and profiles the edges.
Polishes the sinks and counters.
Sink cut out. Sink profiling and polishing.
Counter edges profiling and polishing.
Works on quartz, granite, marble, porcelain and all other stone.
Automatic tool changer. 11 tools storage.
The installation is plug and play, without any structural works.
Cuts sinks in any size counter, vanity or even an Island. No limitation of the size.
Operation of machine is very simple. Easy to use programming. No specific skills required.
Stoneplus
China
STONEPLUS MACHINERY CO.,LTD
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
End mill coping machine, specially designed for milling shapes and recess in marble and granite or similar products. All ECHO’S can be equipped with a saw unit “S” , of which the saw can be turned 90 degrees.
The CNC machines have an automatic control.
There are two models :
1. ECHO OC
The shape is scanned on the scanning table and transferd to the machine.
Milling unit above the working table, scan unit about the scan table.
Machine provided with drilling unit
Milling and reading unit connected and mounted on support, which moves over an guide bridge that can roll over a rail.
Milling diameter between 30 and 50mm.
Rail length 4m.
Reading and working table each 2200x1100mm.
Drilling unit suitable for diamond drills of 15 to 60 mm.
Max. material thickness 120 mm
Optional:
Working range 3000x2000mm TYPE 30SB7
Vacuum clamping possibility
2. ECHO OC / S
Like ECHO OS, with extra saw head.
Saw blade diameter 250 mm
Cutting depth 65 mm
Rise and fall 265 mm
Rotation 0 – 90 degrees
MAVECO Stone Machinery BV
Netherlands
MAVECO Stone Machinery BV
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Machining center BAZ 3000
Machining center with 3 to 6 axes
The CNC work center with 3 to 6 interpolated axes guarantees maximum precision and flexibility. A newly developed electronic and pneumatic pressure regulation makes perfect surfacing and polishing possible. Easy handling and well-developed software ensures trouble-free and economical operation.
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Machining center with 3 to 5 axes
The BAZ 2000 machining center was designed in particular for the production of kitchen countertops, shower trays and solid washbasins. The very flexible machine concept is based on a mature design and combines proven components with a high-quality SIEMENS CNC control. The machine in the bridge version is available with several work tables. The number of tool positions is unlimited. In addition, a compact variant is available as a monoblock version.
weha
Germany
Weha Ludwig Werwein GmbH
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Unika 5 axis fabrication center is a versatile machine that can be order to suit any customers needs.
Kristech Services Ltd.
Canada
Kristech Services Ltd.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Work centre with 3/4 interpolated axes managed by new generation numeric control that manages the movements of all axis.
The high speed movements of the X, Y and Z axis, are obtained with brushless motors and helicoidal racks to guarantee maximum precision, the movement is performed by recirculating roller on linear guideways automatically lubricated.
The movement of the vertical Z axis is performed by a recirculating ballscrew, the translational motion of the beam is performed by a motor positioned between two pinions which scroll on a precision racks with helicoidal teeth.
The structure of the vertical carriage in the form of a cage, is performed in electro welded steel which ensures the machine more stability and rigidity, minimizing vibrations generated during processing.
EmmeDue
San Marino
EmmeDue Division - Industrie Montanari S.r.l.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Fully interpolated 6 axis movement with rotating head with 370° range, inclination from 0-120°.
Hot dipped galvanized non rotating table with variable height saw surface in either wood, high density plastic or rubber matting (optional) with max blade size of 1300 mm (51 in) with inverter drive Z axis (rise and fall movement) 1300 mm (51 in) or 1600 mm (63 in) or 2000 mm (78.7 in).
The principle sections of the machine are made from solid cast with ancillary parts made up of hot dipped galvanized steel structures - supplied with folding door solid panel safety barriers.
Fast and precise movements due to brushless motors with absolute encoders, recirculating ball bearing movement, precision gearboxes and interpolated axis from the CNC.
Electro spindle running up to 6000 rpm with centre waterfeed and a 36x2 or ½ gas fitting. Or (on request) ISO40/50 cone fitting running at up to 8000 rpm for automatic tool change.
Suspended pendant with 15” TFT colour touchscreen. Machine is equipped with USB port for easy loading of programs. Stainless steel electrical panel.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
$42000-46000
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC Stone Machine
HKNC-500 with 4 axis interpolation and 1 axis electronic controlled, is a multifunctional CNC stone cutting and shaping machine built with the needs of workshops in mind, combining simplicity with maximum versatility for a minimum investment budget. It is popularly used for cutting slabs and blocks of both natural and synthetic stone, and ceramic.
Functions:
* make vertical, inclined& horizontal Cut with Disc Blade
* cut curves with Contour Cutting
* machine with the Core Tool such as drill, end mill & excavation wheel
* Incremental routing for sink cutting, profiling & engraving
Match these capabilities with Italian ESA CNC system, digital servo motors and CAD CAM drawing software to make all kind of cuts with ease. HKNC-500 can also been equipped with a vacuum manipulator for the automatic moving of slabs to optimise workpiece usage during the cutting process.
Main Features
1) 4 axis lnterpolation and 1 axis electronic control with Italian CNC Esa system.
2) Easy to use interface with 19" color touch-screen.
3) Blade can rotate 0°-360° and tilt 90° for any any direction's and any angle's chamfering cutting.
4) Working platform can tilt 85 degrees, easy for slabs loading.
5) Easy for loading, unloading and installation due to monoblock structure with size suitable for container.
6) Manual cuts available for simple machining.7) Nesting manual / automatic to optimize slab surface usage
8) Optional - Vacumm manipulator for workpieces handling.
9) Optional - Photo slab for nesting and avoiding defects.
10) Optional - Vein match for easily matching up perfectly each vein,color at the seam of your project.
HUALONG
China
Fujian Province Hualong Machinery CO., LTD.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single.
For high production sawing up to thirteen axes.
Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°.
Independent tool wear control and compensation for each blade.
Accurate and fast thanks to brushless motors and to linear bearing guides.
Extreme precision cutting result due the rotating top cutting unit, the material doesn’t need to be shifted or re-aligned.
Automatic nesting of the cutting piece on board with defect track, due the use of and external camera, the cutting performance are guarantee from the easy to use software and the GMM patented vacuum installed on the central unit.
Ability to load electronic cutting sheet.
The machine performs automatically parallel cut, arcs and pieces shift by vacuum for allowing blade overruns.
Compact cutting line solution when equipped with automatic loading device and roller belt feeding system. Large production result up to 490 sq/m in 8 hours.
OPTIONAL
Nesting.
Camera on board.
Parametric program.
Vacuum system.
Robotic loader.
Automatic load carrier.
Motorized roller unit.
Short conveyor belt for cutting.
Short conveyor belt for unload.
Drying fun.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
MULTISPINDLE CNC CUTTING CENTER
The machine is equipped with up to 5 blade motors driven by different variable speed power units to be used simultaneously or single.
For high production sawing up to thirteen axes.
Multi blade cutting for dimension from 140 mm to 2000 mm, the central unit can perform inclined cut up to 90° on all around 370°.
Independent tool wear control and compensation for each blade.
Accurate and fast thanks to brushless motors and to linear bearing guides.
Extreme precision cutting result due the rotating top cutting unit, the material doesn’t need to be shifted or re-aligned.
Automatic nesting of the cutting piece on board with defect track, due the use of and external camera, the cutting performance are guarantee from the easy to use software and the GMM patented vacuum installed on the central unit.
Ability to load electronic cutting sheet.
The machine performs automatically parallel cut, arcs and pieces shift by vacuum for allowing blade overruns.
Compact cutting line solution when equipped with automatic loading device and roller belt feeding system. Large production result up to 490 sq/m in 8 hours.
OPTIONAL
Nesting.
Camera on board.
Parametric program.
Vacuum system.
Robotic loader.
Automatic load carrier.
Motorized roller unit.
Short conveyor belt for cutting.
Short conveyor belt for unload.
Drying fun.
GMM
Italy
Gmm S.p.A.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
5 axes Cnc machine .Simple to be used .
Slide of disc-holder slips on guides in hardened steel with recirculating balls pre-loaded for the elimination of the mechanical clearance.
Positioning with pinion-helical rack system of precision and epicycle reducer with 0 clearance (Axis X).
Sliding of the bridge on guides in hardened steel, cold-drawn, in class of precision H and sliding-block with recirculating balls pre-loaded.
Positioning with 2 motors in electrical-axis with pinion- helical rack system of precision and epicycle reducers with 0 clearance (Axis Y).
Sliding of head-holder on over-dimensioned chromed cylinder.
Positioning with system screw-nut with recirculating balls pre-loaded and epicycle reducer with 0 clearance (Axis Z).
Spin of the head ± 185° with reducer of high precision with eccentrics with 0 clearance (Axis C).
Spin of the mandrel 0°-90° by manual wheel.
Disc motor, power 15 kW, directly connected to the biade, electronic control of rotation speed by mean of INVERTER.
Switchboard with isolation IP 55 at the right of the machine and outside of the foundation wall, with the general switch and block door. In the control panel are grouped the contactors with the relative thermal protections, the drives and the electronics controis, the complete PLC control while the Touch screen panel and the keyboard are positioned in a remote pendant box.
Laser beam facilitates positioning of biade on cutting line.
Water pressure switches stops machine, if cooling water insufficient.
Tools are protected by an electronic ammeter to prevent use above preset values.
Refrigeration pipes and electrical wiring protected in plastic cable trailer chain.
Terzago
Italy
Terzago Macchine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Five is an extremely precise 5-axis machining center and bridge saw (6 axes with the lathe), with automatic tool change and magazine, that can be extended according to specific needs. The possible configurations make the machine suitable for the execution of important works, from roughing to finishing, with highly detailed results. The precision of the Helios Five allows achieving the greatest part of the stone processes possible, such as small and large sculptures and statues, kitchen tops with profiling and edge polishing, drain boards and much more. This feature makes Helios Five unique in its category.
As a bridge saw, the machine can work with disks with diameters of up to 725 mm. Thanks to its imposing structure and the technology developed by Helios. Helios Five can process all types of cut with extreme precision (45° angled cuts, shaped cuts, arches cuts angled on both sides, etc…)
Helios Five can have the Z stroke of 680, 1000 or 1200 mm and can be equipped with the interpolated lathe, thus increasing the executable machining in the stone sector.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
An extremly simple machine to use.
CNC 4 axis, cutting, shaping and much more
Terzago
Italy
Terzago Macchine
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Integrated Linear Systems 4.0 support the evolution of your stone workshop to the new frontiers of the so-called INDUSTRY 4.0.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Dea is а revolutionary bridge saw and machining center with 5 interpolated axis (8 with the patented slab handling system Robo-Move). It is powerful, fast, precise, and reliable; ideal for all types of cut (straight, curved, angled, etc) and manufacturing of complex frames with disk or milling tool. It is very easy to use thanks to the software, developed by Helios Automazioni and to the possible accessories. The patented Robo-Move system, equipped on Helios Dea, carries out all the functions of handling, clamping, and unloading of the pieces in total automation and execution speed.
Thanks to the several precautions, that make the entire process automatic and safe for the operator, Helios Dea can represent the safest and the most precise machine among the stone market.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The machining centers from the Helios STAR series are powerful and fast, they differ from the traditional anthropomorphic robots for their precision and reliability. The tower structure allows a vertical process of pieces from different size and big blocks, which are easily clamped on a turning table with slats. Helios STAR can manage all the 360° processes possible such as statues, capitals, columns, portals, as well as processes of milling, sculpturing, engraving, and writing. Moreover, thanks to the optional lathe, it is possible to make horizontal turning processes with disk and tool. The integrated Helios Galaxy Stone software makes its use easy and fast, it is ideal for design, rendering, and creation of many machinings. It provides strategies to minimize the lead time and maximize the finishing quality, from the design to the manufacture of the product. The security doors guarantee a protected process for a total operator’s safety.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Five is an extremely precise 5-axis machining center and bridge saw (6 axes with the lathe), with automatic tool change and magazine, that can be extended according to specific needs. The possible configurations make the machine suitable for the execution of important works, from roughing to finishing, with highly detailed results. The precision of the Helios Five allows achieving the greatest part of the stone processes possible, such as small and large sculptures and statues, kitchen tops with profiling and edge polishing, drain boards and much more. This feature makes Helios Five unique in its category.
As a bridge saw, the machine can work with disks with diameters of up to 725 mm. Thanks to its imposing structure and the technology developed by Helios. Helios Five can process all types of cut with extreme precision (45° angled cuts, shaped cuts, arches cuts angled on both sides, etc…)
Helios Five can have the Z stroke of 680, 1000 or 1200 mm and can be equipped with the interpolated lathe, thus increasing the executable machining in the stone sector.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The new range of Integrated Linear Systems 4.0
Discover the full automation of the stone fabrication process.
The Integrated Linear Systems 4.0 support the evolution of your stone workshop to the new frontiers of the so-called INDUSTRY 4.0.
If you are in the process of buying a new saw or a machining center, please contact us, we would be more than glad to develop your own automated solution!
These Systems have been conceived for easy integration in your production cycle. Our experience in mechanics and software allows us to find the most suitable solution for your company.
LEARN MORE HERE:
https://www.heliosautomazioni.com/en/news/the-new-range-of-integrated-linear-systems-4.0l
WATCH THE FULL VIDEO HERE:
https://www.youtube.com/watch?v=kcVjM52xAzg
Schedule a demo with us, you will be our special guest!
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Machine characteristics:
The SNM-SC1200 is a technically advanced 3 axis CNC machine. It has a fixed bridge structure, with a mobile carriage and table, made as a single strong and solid unit with no need for special foundation structure when installed.
General Characteristics:
The SNM-SC1200 has a 14 automatic tool changer. It is fast, and easy to program for marble, granite and stone. It is capable of carrying various types of jobs using either tools or disks. With the SNM-SC1200 it is possible to engrave, write, carve, shape, cut and drill. It is the ideal machine for making kitchen tops and pocketing.
The 3 interpolated axis motion is done by brushless motors coupled with extremely precise reduced back lash reduction gears.
The table sliding device is working in an oil bath to reduce friction and is protected by stainless steel covers.
The carriage works on hard chrome axes coupled to low friction Teflon slides protected by bellows.
The machine X, Y and Z axes move with a high precision rectified ball screw.
The CNC:
The SNM-SC1200 CNC stone center is equipped with the latest CNC with the following features:
3 interpolated axis control + 1 controlled spindle.
1 Hand-wheel directly connectable to the operator panel.
2 overrides (feed and spindle rotation).
Man / Machine interface, which has been developed in a Microsoft Windows environment, is extremely user-friendly and intuitive. The different functions available can be selected by using soft keys that are associated with toolbar icons depending on the operational context.
SNIC
Lebanon
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The Integrated Linear Systems 4.0 support the evolution of your stone workshop to the new frontiers of the so-called INDUSTRY 4.0.
If you are in the process of buying a new saw or a machining center, please contact us, we would be more than glad to develop your own automated solution!
These Systems have been conceived for easy integration in your production cycle. Our experience in mechanics and software allows us to find the most suitable solution for your company.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
The new range of Integrated Linear Systems 4.0
Discover the full automation of the stone fabrication process.
The Integrated Linear Systems 4.0 support the evolution of your stone workshop to the new frontiers of the so-called INDUSTRY 4.0.
If you are in the process of buying a new saw or a machining center, please contact us, we would be more than glad to develop your own automated solution!
These Systems have been conceived for easy integration in your production cycle. Our experience in mechanics and software allows us to find the most suitable solution for your company.
LEARN MORE HERE:
https://www.heliosautomazioni.com/en/news/the-new-range-of-integrated-linear-systems-4.0l
WATCH THE FULL VIDEO HERE:
https://www.youtube.com/watch?v=kcVjM52xAzg
Schedule a demo with us, you will be our special guest!
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Futura is a 3-axis CNC machining center suitable for all stone workshops. The Futura technology has been studied both for monument/memorial builders and interior design fabricators. Thanks to the sturdy stainless steel structure, recirculating ball screws and linear guides, it is the best friend for precision and reliability. The finished product is extremely thorough and it doesn’t need any extra hand work. The exclusive Galaxy Stone software, developed by Helios Automazioni’s engineers and running under Windows, guarantees easy and fast automation of the process.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Futura X5 is the monolithic 5 interpolated axis machining center with automatic tool change, suitable for all stone workshops. The Futura technology has been studied both for monument/memorial builders and interior design fabricators. Thanks to the sturdy stainless steel structure, recirculating ball screws and linear guides, it is the best friend for precision and reliability. The finished product is extremely thorough and it doesn’t need any extra handwork. The exclusive Galaxy Stone software, developed by Helios Automazioni’s engineers and running under Windows, guarantees easy and fast automation of the process.
Learn more here:
https://www.heliosautomazioni.com/en/cnc-3-5-axis/futura-x5.php
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios machining centers are the most suitable for all stone workshops. The technology has been studied both for monument/memorial builders and interior design fabricators. Thanks to the sturdy stainless steel structure, recirculating ball screws and linear guides, they are the best friend for precision and reliability. The finished product is extremely thorough and it doesn’t need any extra handwork.
The exclusive Galaxy Stone software, developed by Helios Automazioni’s engineers and running under Windows, guarantees easy and fast automation of the process.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Gmatic 3000 is a machine with a solid structure and an indispensable tool magazine, which facilitates the production of kitchen countertops, shower boards, drainers, decorative elements, bas-reliefs and inscriptions.
The large monoblock frame allows the positioning and processing of large slabs, such as synthetic and ceramic materials. The work table is made of natural stone, leveled by the machine itself.
The Gmatic 3000 uses 4 brushless motors to move the axes on linear guides with ball bearings. The machine is available for manual tool change or with automatic tool change. The control interface is a console equipped with a comfortable, large, 21.5 "touch screen, GCAM's own software, which was developed especially for the stone industry.
Ghines
Poland
Euro Arss S.C.
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
CNC MACHINING CENTER
GENERAL DESCRIPTION:
NC4-320 4 axes is a multifunctional working centre to process marble, granite and compound stone designed also for complex processing in short time and high quality. NC4-320 has been specially designed to ensure higher production capacity as well as the largest flexibility thanks to the very high working and displacement speed and the wide gamut of possible geometries,which allow any kind of processing ( shaping, profiling, milling, chamfering, drilling...)on marble, granite and compound stone slabs without the intervention of the operator, following a pre-set program. The machine features a mobile bridge structure, engineered using the state-of-the-art techniques of computer-assisted design, which forms a sole assembly with the uprights fixed to the based onto which the pieceholding table is applied.
AXES MOVEMENT:
The axes move by re-circulating ball screw at 60 m/min with accelerations which permit to reach the maximum speed in very short time. An automatic device to lubricate the guides and the screws grants high reliability over the time of every moving part.
The rapid displacements of the bridge along the shoulders are performed at a speed of 40 meters per minute; this make it possible to have faster work cycles, as all idle times for non-operative movements are absolutely negligible.
THE SPINDLE UNIT:
The tempered and rectified steel guides for the displacement of the spindle holding saddle (x axis) are machined onto the normalized, electrowelded steel bridge, suitably dimensioned and ribbed. The whole sliding system is protected in order to avoid any possible contamination between the processing water and lubricating oil. The spindle holding saddle moving on recirculating roller slides.
In order to obtain rapid displacement up to 40 meters per minute, which accelerates the work cycles, the movement of the spindle-holding saddle is provided by a fixed high precision rectified screw and a mobile ball bearing preharced lead nut linked directly to a digital SIMENS servo motor.
The electro-spindle adopted for this work centre is manufactured by the most important european producer of these components; it is a powerfull unit (12kw) and can attain very high rotationspeed (max 11.000 rpm) in order to use milling tools with reduced diameters and therefore, providing extremely pricise processing. The stator and the rotor are housed within the casing; the whole assembly is cooled and stabilized by means of a thermal sensor to increase its reliability. The tool cooling water and the cone cleaning air pass through the spindle at a flow rate of 60lt/min. Spindle vertical travel of same 400 mm which allows to also rough-sahpe tick billets.
CONTROL UNIT:
The NC4-320 is equipped with a latest technology continuous numerical control unit (CNC) SIMENS sinumeric of the latest generation, with digital control on PC architecture.
STRUCTURE:
The support structure of the NC4-320 is composed of a rugged closed-type structure fabricated from a single pieces of normalized welded steel, so as to quaranty the maximum rigidity, thereby providing extremely pricise processing
The bridge moves along the shoulders of the main structure, onto which the tempered and rectified steel guides are machined.
The bridge movement along the shoulders is by a system of two recirculating ball-bearing screws with precharged lead nuts, each one acting on one side of the bridge.
This solution allows to have perfect control and absolute precision oof movement and positioning. Traction is garantied by two digital servo motors, each one acting on one screw; the perfect synchronism of the two screw is constantly driven by SIMENS numerical control installed on the machine.( Gantry drive system )
The NC4-320 numerical work centre has a mobile bridge along the Y axes; this solution makes the work area completely open and accessible, which facilitates loading and unloading of work-pieces even when lifting equipment is required.
Vacuum circuit with frontal control, easily accessible to the operator.
THE WORK TABLE
The machine’s base is made up of an extremely rigid structure upon which is placed an aluminium worktable rectified to grand maximum flatness of the work area. Aluminium work table provided with grooves for mechanical fastening of vacuum pads, to ensure that, the work pieces are tightly locked in place even during heavy grinding operations 22 position line tool store positioned on the two internal sides of the machine.
THE FOURTH “C” AXES:
Among the range of accessories, it is also available a unit that allows to use tools with horizontal axes.
This unit is fixed to the spindle by means of ISO 40 coupling,as any other tool; it can continuously rotate 360 around the , “C” vertical axes, which is numerically controlled and can be locked in any position to perform retilinear cuts in all directions.
It is a continuous rotating fourth axes “C” which makes it possible to use cutting units with vertical disc to perform rectilinear cuts, or convex disc for corvilinear cuts, or 45 adjustable disc to perform inclined cut
STANDARD SUPPLY
Manuel for use and maintanance.
20 pcs. BT 40 tool stainless steel holder cones ( ½ gas )
20 pcs. Adapter for wheel cutters
20 pcs. Pullstad bolds.
4 pcs. Ø160 mm suction cups.
4 pcs. Ø 100 mm suction cups.
4 pcs. Ø 80 mm suction cups.
6 pcs. Retractable positioning reference supports.
2 pcs. Pneumatic vice.
2 pcs. Retractable suction cups Ø 100 mm.
Tool box.
Spindle motor chiller
Vacuum pump
Water filtration device.
Air filtration devices for 5 microns
Electric box air-conditioning.
Electronic Siemens handwheel.
2 pcs. Water pumps. -
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Dea is а revolutionary bridge saw and machining center with 5 interpolated axis (8 with the patented slab handling system Robo-Move). It is powerful, fast, precise, and reliable; ideal for all types of cut (straight, curved, angled, etc) and manufacturing of complex frames with disk or milling tool. It is very easy to use thanks to the software, developed by Helios Automazioni and to the possible accessories. The patented Robo-Move system, equipped on Helios Dea, carries out all the functions of handling, clamping, and unloading of the pieces in total automation and execution speed.
Thanks to the several precautions, that make the entire process automatic and safe for the operator, Helios Dea can represent the safest and the most precise machine among the stone market
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Cut 500 is a fast and performing 5 interpolated axes bridge saw. It has been developed for high precision cutting processes on ceramics, quartzites, as well as marbles and granites. The exclusive characteristic is the stainless steel monolithic structure, which guarantees a total endurance against corrosion and a remarkable duration over time. The bridge saw can have both manual and total automated functions thanks to the advanced levels of the software, which allow to process easily a lot of jobs such as multiple linear cuts, perpendicular linear cuts, mitering, cut of kitchen/bath tops, calibration, decorative walls, shaping, inclined cuts, net and clean cuts, roughing, scraping, fan-shaped stairs, template reading, and much more. The integrated Helios X-touch software is user-friendly and intuitive, it can be combined with Helios Photoscan, which is the slabs scanner, as well as measuring system and template reader. Together they can start the cutting process just a click away.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios Lux is the fastest and most efficient bridge polishing machine with an automatic tool change in the market. It is a sturdy machine, which preserves its quality over time (no rust), entirely built with stainless steel both in the structure and the fixing bolts. Thanks to the automatic tool changer it is possible to polish and brush all types of materials (granite, onyx, quartz, etc.) without the manual intervention and with excellent results. The working head, developed by our engineers, allows to have constant pressure control and to work also on not perfectly flat surfaces, thus saving the 50% on the use of abrasives. Helios Lux can work on multiple slabs (also different for shape and thickness) over the working table during a unique polishing cycle without blocking the machine or interrupting the process. The integrated X-Touch software and the system Helios Photoscan for the slab scanning and measurement make a polishing cycle very easy, intuitive, and fast.
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
-
Add To Compare
Type: Stone Factory MachinesStone Finishing, Profiling MachinesCNC Working Center
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Helios ZT is an extraordinary machine with the functions of a 5-axis machining center and a 5-axis polishing machine, which can polish both the surface and the edge with the control of the pressure.
It has been designed for granite monument fabrication but it also finds extraordinary applications in the interior design industry of glass or other precious materials.
The whole structure of the machine is stainless steel, unique feature in the world. The working table is a solid block of granite, which ensures maximum rigidity and minimal thermal expansion.
Come and visit us to experience hands-on demonstrations and find together the most suitable solution for your projects.
https://youtu.be/OSeBlJ0y9Kw
HELIOS
Italy
Helios Automazioni Srl
Contact Supplier
Have a Question? Ask our expert
Ask now
