Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Basalt, Sandstone
Machinery Function Features:
1.Marble chain saws enable dry cutting without water cooling, reducing noise and dust pollution. 2.The marble chain arm saw can be suitable for marble ore bodies of different materials and can be used in one machine. 3.Intelligent settings minimise preparatory work for high productivity, simplifying operation and effectively reducing labour intensity. 4.The orbital chain arm saw is direcly placed on the surface of the mining body. The machine is equipped with 3 orbits as standard. The tracks are
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels Installed power: 60 kW Weight: 30,000 Kg Electrical power supply: 400V/50 Hz Cutting depth: 3.0 m (XXL) Tunnel height: 5.15-5.62 m max GU70RXC Sawmill Machine for Tunnels Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunne
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Usage: Granite, Marble
Machinery Function Features:
Cavern-type chain saw is special for marble hole mining, crawler walking conveniently and flexibly, its orbit can rotate 270 degrees, which has 4 kinds of working model---horizontal cutting(cutting the top of ceiling and ground),vertical cutting(cutting left side of the facade and the right side of the facade),suitable for the quarries with high steep slope and can't excavate mountain skin layer and do overburden stripping.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The STANDISH DOUBLE BAR HORIZONTAL SAW allows the owner to make multiple cuts quickly and easily in one set-up. This unique saw utilizes 1 1/2” wide diamond belts (2) and 6’-3” cutting bars (2) to make horizontal cuts in the face of a vertical wall. The machine will make a bottom cut and a mid-wall cut at the same time with a top cut being made during a reverse pass along the wall. Features: • Double Bar with diamond cutting belt • Cutting belt drive—75 H.P. • Center to Center distance of cuttin
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION Model HSTK 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Operation speed 0 - 44 cm/min Cutting width 42 mm Useful cutting depth 2,75 mt (max) Rotation of cutting jib 360° Weight of the machine 6.900 kg Weight of the hydraulic device 1.450 kg This model is designed for underground quarries, the max cutting height is 4.500 mm.
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth. Technical Specifications Total installed power: 45 KW Overall weight: 14,000 Kg Hydraulic tank ca
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. This is self-propelled on caterpillar tracks and completely autonomous in movement. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres deep. Technical Specifications Total installed power 56 KW Electrical power supply 400V/50 Hz Machine weight Kg. 16,000 Hydraul
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model SV50 is a special version of the family of self-propelled machines for tunnel excavations. This machine is designed to perform rear cutting of the blocks whilst the tunnelling advances forwards. The depth of the rear cut can reach up to 1.7 metres. Technical Specifications Total installed power: 30 kW Hydrostatic transmission with variable flow pump Weight: 8,000 Kg Useful for cuts of up to 1.60 metres (on both the right and left hand sides) Hydraulic tank capacity: 150 litres Ch
All Fantini chain saw machines can be equipped with a radio remote control. The radio remote system allows the operator to move around the machine: no cable is needed to be connected to the remote control, so the operator can stay far from the chain saw in a safe position more suitable to check the movements of the chain saw. Each radio remote control has a unique transmission program set by the producer and unchangeable, so that each transmitter can interact only with its receiver and cannot in
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. SV-C 50 Special chain saw machine for back cut of blocks in the underground quarry. Total power 30 KW Hidrostatic transmission with variable speed pump Weight Kg. 8.000 Useful cut up to 1.60 mt (on the right side as well as on the left side) Hydraulic oil tank capacity Lt. 150 Chain rotation speed from 0,1 to 0,7 mt./sec. Arm cutting speed rate up to 15 cm/min. Grease capacity up to 500gr/h Noise level rate: 85 decibel Max speed on tracks 1,5 km/h Chain saw dimensions: L
The dust Aspirator completely removes the dust in the horizontal cut position as well as in the vertical one. The dust is unload at one side of the sliding rail by a worm screw system. Before entering in the filtering chamber the dust passes through a pre-chamber which allows to remove the big parts. - Tender version The dust aspirator is placed on the rail of the machine and translates with the machine. Supported models: -70 sup-H -70 rap -50.81 - Static version The dust aspirator is fixed in t
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. Gu.50-R-SC/T This chain saw can make vertical and horizontal cut against the underground face wall. It is a self propelled machine on tracks and completely autonomous in movements, besides it is equipped with a rotation fifth wheel. Only one operator is needed to operate the chain saw. This model of machine can make a cut until 2,0 m of depth in hard stones.
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sin
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Basalt, Sandstone
Machinery Function Features:
1.Marble chain saws enable dry cutting without water cooling, reducing noise and dust pollution. 2.The marble chain arm saw can be suitable for marble ore bodies of different materials and can be used in one machine. 3.Intelligent settings minimise preparatory work for high productivity, simplifying operation and effectively reducing labour intensity. 4.The orbital chain arm saw is direcly placed on the surface of the mining body. The machine is equipped with 3 orbits as standard. The tracks are
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The STANDISH DOUBLE BAR HORIZONTAL SAW allows the owner to make multiple cuts quickly and easily in one set-up. This unique saw utilizes 1 1/2” wide diamond belts (2) and 6’-3” cutting bars (2) to make horizontal cuts in the face of a vertical wall. The machine will make a bottom cut and a mid-wall cut at the same time with a top cut being made during a reverse pass along the wall. Features: • Double Bar with diamond cutting belt • Cutting belt drive—75 H.P. • Center to Center distance of cuttin
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sin
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Tunnel Quarry Chain Saw.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Italy
China
Greece
United States
5YR
