Bridge Cutting Machine for Slabs

Bridge Cutting Machine provides precise and fast processing and cutting without vibration with its monoblock structure and All Steel Chassis.
(AUTOMATIC) System Is Switched To Automatic Mode, The Barrel Moves Down Manually, The Wagon Starts To Cut The Stone, The Saw Comes To The Entry Place With Its Exit From The Stone.
(SEMI-AUTOMATIC) Sizing values ​​are entered on the screen. The system is taken to the sizing mode, the dimensions of the stone are entered, the barrel moves automatically downward the saw starts to cut the stone when the saw comes off the barrel automatically lifts up the saw comes to the beginning, the bridge counts to the desired size and the barrel moves forward again, BiteR when the given measurements and pieces are completed
(XY FULLY AUTOMATIC) Fully automatic mode is taken on the screen XY values ​​are entered System lengths, numbers and dimensions of the parts to be cut are written, the barrel moves automatically downward the saw automatically starts to cut the stone when the saw comes off the barrel automatic raising saw comes to the beginning, the bridge slide counts the desired size And The Barrel Comes Against The Cutting (X AXIS When The Cutting Is Finished, The System Automatically Turns Its Head On The (Y) Minus The Dimensioning It Continues In This Way Without Hand Touching It Up To The Plate Bit.
All Steel is Used on Mono Block Bridge Cutting, Anti-Rust Epoxy Paint Reinforcement, Special Liner Rail System, Protective Bellows System Integrated.
Our Machine Cutting 90 degrees and 45 degrees Reducer Works Automatically.
Our Bridge Cutting Machine is designed as both Head Cutting Sizing and Side Sizing, X-Y Sizing with full size system.
Our machine Head rotation circular movement (C axis) is AUTOMATIC
Our machine is AUTOMATIC with 45 Degree movement reducer.
Our machine is Bridge Movement (Y axis) AUTOMATIC / Manual
Our Machine Saw Movement (X axis) is AUTOMATIC / Manual
Both Manual, Automatic, Semi-Automatic. Fully Automatic, Usable.
Head System is fixed at 45 degrees by cutting 0 to 90 degrees.
Braked Motor has been used in our machine.