Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without
Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels Installed power: 60 kW Weight: 30,000 Kg Electrical power supply: 400V/50 Hz Cutting depth: 3.0 m (XXL) Tunnel height: 5.15-5.62 m max GU70RXC Sawmill Machine for Tunnels Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunne
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut. The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The SV-C/70 mod. chain saw has been designed and built to execute vertical and frontal cuts on large banks or large blocks in ornamental stone quarries, and does not require water cooling. The machine is mounted on a fifth wheel track system enabling it to negotiate even the most difficult terrain, and the endothermic diesel motor guarantees autonomy and independence. It is capable of achieving cutting depths of up to 6.2 m (length) and 7.0 m (height). Installed power: 62.5 Kw Weight: 24,000 Kg
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The STANDISH DOUBLE BAR HORIZONTAL SAW allows the owner to make multiple cuts quickly and easily in one set-up. This unique saw utilizes 1 1/2” wide diamond belts (2) and 6’-3” cutting bars (2) to make horizontal cuts in the face of a vertical wall. The machine will make a bottom cut and a mid-wall cut at the same time with a top cut being made during a reverse pass along the wall. Features: • Double Bar with diamond cutting belt • Cutting belt drive—75 H.P. • Center to Center distance of cuttin
Terna FANTINI Block Sawing Machine The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank. As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works
70BU-C Block Sawing Machine Chain Saw Model 70BU-C is a self-propelled crawler for vertical cutting, and can be fitted with arms that can cut up to 4.0 metres deep. The machine is fitted with a unique self-propelled track with hydraulic stabiliser feet. It can autonomously move into different areas of a quarry to make cuts into floors or square off blocks, without the need for water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
TECHNICAL SPECIFICATIONS Model ST 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Cutting width 42 mm Useful cutting depth 4,20 mt (max) Rotation of cutting jib 360° Weight 5.100 kg. This model is designed for open top quarries.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
QST3000D Chain Saw Machine on Backhoe The QST3000D chain saw machine mounted on a backhoe represents the latest frontier for squaring blocks of marble and natural stone. Its technology is powered by the backhoe’s powerful motor , and the hydraulic circuit for moving the chain saw was developed in collaboration with Caterpillar technicians and our own technical team. Key Advantages Operates day and night in all weather conditions , as the operator can control the cabin temperature. Can work witho
The 70RABU chain saw machine features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor, and can execute horizontal and vertical cuts without the need for water cooling. The main feature of this machine is the single rail that allows it to be repositioned longitudinally rapidly and without the need for lifting equipment. Technical Specifi
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of a special plastic belt with si
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CHAIN SAW MACHINE mod. HSTK450 2VH CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION Model HSTK 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Operation speed 0 - 44 cm/min Cutting width 42 mm Useful cutting depth 2,75 mt (max) Rotation of cutting jib 360° Weight of the machine 6.900 kg Weight of the hydraulic device 1.450 kg This model is designed for underground quarries, the max cutting height is 4.500 mm.
The 70 SUPER /H chain saw machine is the most powerful model in the FANTINI range. It features a vertical cutting capacity of up to 8.0 m and provides excellent results with both marble and other types of hard stone. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor. The electro-hydraulically operated controls guarantee power and speed in all operating conditions and the machine can execute horizontal and vertical cuts without the need for
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION Model HSTK 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Operation speed 0 - 44 cm/min Cutting width 42 mm Useful cutting depth 2,75 mt (max) Rotation of cutting jib 360° Weight of the machine 6.900 kg Weight of the hydraulic device 1.450 kg This model is designed for underground quarries, the max cutting height is 4.500 mm.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Limestone, Sandstone, Travertine
Machinery Function Features:
CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION Model ST 300 VH Power of main electric motor 33 Kw / 46 Hp Hydraulic tank capacity 180 Lt. Cutting width 42 mm Useful cutting depth 2,50 mt (max) Rotation of cutting jib 360° Weight 3.100 kg This model is designed for open top quarries with soft stone.
The Fantini 50.81 chain saw machine is designed for use in medium hardness stone quarries and can execute cuts to a depth of up to di 3.4 m. In the case of hard type marble and stone, the cutting depth is reduced to 2.8 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (RA/P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the
The 70RATA sawing machine can cut up to 5.10 m and can even be used for marble and high hardness stones. Thanks to the presence of PLC and Encoders, its main feature is the ability to perform vertical and horizontal cuts in unattended mode, by setting the cutting measurements (depth and length) before execution. The machine is driven by a hydraulic device with the main, variable flow rate pump driven by an electric motor, and performs horizontal and vertical cutting without the need for cooling
The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lif
Chain Saw Model 70.RA/PD can make cuts of up to 5.1 metres, and was designed and built to make vertical and horizontal cuts on hard and/or abrasive stones without the need for cooling water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for any electrical wiring connections to generators or power grids. This model is particularly useful in working environments that are not connected to the power grid. Technical Specifications Instal
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth. Technical Specifications Total installed power: 45 KW Overall weight: 14,000 Kg Hydraulic tank ca
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. This is self-propelled on caterpillar tracks and completely autonomous in movement. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres deep. Technical Specifications Total installed power 56 KW Electrical power supply 400V/50 Hz Machine weight Kg. 16,000 Hydraul
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Chain Saw Model SV50 is a special version of the family of self-propelled machines for tunnel excavations. This machine is designed to perform rear cutting of the blocks whilst the tunnelling advances forwards. The depth of the rear cut can reach up to 1.7 metres. Technical Specifications Total installed power: 30 kW Hydrostatic transmission with variable flow pump Weight: 8,000 Kg Useful for cuts of up to 1.60 metres (on both the right and left hand sides) Hydraulic tank capacity: 150 litres Ch
SQB/P Sectioning Sawing Machine The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks with a horizontal arm capable of vertical cuts for the squaring off and blocking of hard and/or abrasive stones. The cuts are programmable by means of a computerised system loaded with positioning and cutting parameters. Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without re
The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks, and a horizontal arm that can make vertical cuts for squaring off and blocking hard and/or abrasive stones. The cuts can be programmed by means of a computerised system loaded with positioning and cutting parameters. Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without the need for interventions by an oper
It is possible to equip the Fantini chain saw machine at one single rail with tracks on the end of the rail. They allow the chain saw to make orthogonal translation movements and to rotate on itself besides to make longitudinal translation. So the machine can freely move and positioning in the cutting area. Supported model: -70 version BU -50.90 version BU -50.81 version BU -20.90 version BU
Type: Stone Quarry Machines › Stone Chain Saw Machines › Beam Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
The grease loading station is an useful equipment for the ordinary maintenance of Fantini chain saw machines. It includes a compressor, a tank, a greasing pump necessary for recharge the grease for the cutting operations. The station can be transported inside the quarry by lifting it through the barycentric hook or by the coupling device to the fork supplied with machines for blocks handling. Grease capacity: 180 kg Compressor power: 2,9 kw Total weight: 450 kg about Grease pump technical specif
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
CHAIN SAW MACHINE Series 70 Sup-H The chain saw 70 SUPER /H is the most powerful model of FANTINI chain saw machines. It has a vertical cut capability up to 8,0 m. of depth. It has high performances also in cutting very hard marbles and stones. The chain saw is started by an hydraulic system with a main variable speed pump put on by an electric motor. The electro-hydraulic controls give suitable power and speed in different working condition. The chain saw makes horizontal and vertical cut with
All Fantini chain saw machines can be equipped with a radio remote control. The radio remote system allows the operator to move around the machine: no cable is needed to be connected to the remote control, so the operator can stay far from the chain saw in a safe position more suitable to check the movements of the chain saw. Each radio remote control has a unique transmission program set by the producer and unchangeable, so that each transmitter can interact only with its receiver and cannot in
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
CHAIN SAW MACHINE Series 50.81 The chain saw machine mod. 50.81 is the first chain saw machine ever produced by Fantini company. It is used in medium soft stone quarries, such as travertine, and can make cut up to 3,40 m. of length. In hard marble and stone the cutting length is up to 2,80 m. After so many years of production the chain saw is very reliable and it can be equipped with all the optionals of Fantini cutting technology. The chain saw makes horizontal and vertical cut without water. T
This model of chain saw machine has been produced for cutting medium soft stones and for cutting and squaring the overturned bench in the quarry. It can be equipped with a blade up to 2,0 m of useful cut. It is produced with just the hydraulic system or also with the electro hydraulic system. In the version with one rail it can be equipped with systems making it self propelled such as the central piston and the translation tracks. The chain saw makes horizontal and vertical cut without water. Th
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. SV-C 50 Special chain saw machine for back cut of blocks in the underground quarry. Total power 30 KW Hidrostatic transmission with variable speed pump Weight Kg. 8.000 Useful cut up to 1.60 mt (on the right side as well as on the left side) Hydraulic oil tank capacity Lt. 150 Chain rotation speed from 0,1 to 0,7 mt./sec. Arm cutting speed rate up to 15 cm/min. Grease capacity up to 500gr/h Noise level rate: 85 decibel Max speed on tracks 1,5 km/h Chain saw dimensions: L
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Chain saw on tractor JCB The Fantini cutting system has been produced for squaring the blocks on the face wall as well as in the working areas of the quarry. The cutting unit is transported on a wheeled tractor fast moving and positioning in front of the blocks to be squared. The whole operation is fast and does not need any auxiliary personnel nor water. Power: 68,6 Kw - Weight of tractor t: about 7.000 Kg - Weight of cutting unit: 2.000 Kg - Arm rotation: 9
The dust Aspirator completely removes the dust in the horizontal cut position as well as in the vertical one. The dust is unload at one side of the sliding rail by a worm screw system. Before entering in the filtering chamber the dust passes through a pre-chamber which allows to remove the big parts. - Tender version The dust aspirator is placed on the rail of the machine and translates with the machine. Supported models: -70 sup-H -70 rap -50.81 - Static version The dust aspirator is fixed in t
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Mod. 70 BUC It is a self propelled chain saw machine on tracked trolley for only vertical cut up to 4,0 m. of depth. The chain saw machine is equipped with one self translating rail and hydraulic pistons. It can self move in different areas of the quarry to cut and square the blocks with no need of water. All the movements of the machine are operated by a hydraulic system with main pump connected to an endotermic diesel motor. The endotermic diesel motor star
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
If requested it is possible to install on Fantini chain saw machine a steel frame lifting module for better transport and positioning the chain saw machine in the quarry. The steel frame lifting module also protects the chain saw. Supported models: -70 sup-H current model -70 rap -50.90 current model -50.81 -20.90 current model
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P) , or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for li
Chain saw machine "Victoria" (MKB-11) performs all types of sawing works: vertical, horizontal and at an angle. It works at temperature up to +40 without using cooling liquid.
Model:FM- CS3200 Power: 53Kw Input Power and cable: 380V 50HZ, 3×35 mm²+1×10 mm² Capacity of the hydraulic tank: 200L Lubricating oil capacity: 25kg The maximum vertical cutting depth: 3.2m The maximum horizontal cutting depth: 3.2m Kerf width: 40 mm Chain rotation Angle: 360° Cutting chain speed: 0~1.2m/s Quick positioning speed: 30m/h Cutting speed: 0~7 m/h Water supply and Water pressure: 30L/min,3bar(Cutting normal Marble doesn't need water.)
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Limestone, Sandstone, Travertine
Machinery Function Features:
CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION Model ST 300 VH Power of main electric motor 33 Kw / 46 Hp Hydraulic tank capacity 180 Lt. Cutting width 42 mm Useful cutting depth 2,50 mt (max) Rotation of cutting jib 360° Weight 3.100 kg This model is designed for open top quarries with soft stone.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The STANDISH DOUBLE BAR HORIZONTAL SAW allows the owner to make multiple cuts quickly and easily in one set-up. This unique saw utilizes 1 1/2” wide diamond belts (2) and 6’-3” cutting bars (2) to make horizontal cuts in the face of a vertical wall. The machine will make a bottom cut and a mid-wall cut at the same time with a top cut being made during a reverse pass along the wall. Features: • Double Bar with diamond cutting belt • Cutting belt drive—75 H.P. • Center to Center distance of cuttin
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Limestone Stone Chain Saw Machines.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.