Quartzite Basalt Block Cutting Machine

TSC2100 M Diamond Wire Saw Machine - Single Wire Block Squaring Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Mobile structure single diamond wire saw machine for vertical cutting. Diamond wire saw machine for Vertical sawing. Moving on rails to program several blocks. Runway from 39.37’ to 78.74’. Autonomous machine: possibility to lay out several sawing blocks. The machine can be installed outside. https://www.thibaut.fr/en/machine-tsc2100-m-diamond-wire-saws-monument-building-landscaping/

Twix Roller Wire Saw Machine for Chipping Blocks-Block Squaring Machine, Block Dressing

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Ref.: 98 Twix Roller for chipping the blocks with the diamond wire. The machine has two adjustable mobile parts to enable cutting the block into different sizes in one go. It can be programmed to cut several measurements in the same block or in various sequenced rows of blocks. Data management and storage.

Thibaut TSH2200 Diamond Horizontal Wire Saw Machine for Block Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

A revolutionary system The TSH1800/TSH2200 is a revolution in primary sawing because it saws the blocks horizontally with an automatic wedging insert system. It is a new concept allowing you to cut upon request without blocks handling up to 16 blocks on 40 m runway. Accuracy and flatness in the cuttings allow saving time and abrasives when flat polishing. The accuracy is +/- 0,5 mm. Minimum handling and maxi safety thanks to flat unloading of the slabs (TSH had an award from the “BERUFGENOSSENSC

DUOMATIC Multiwire Machine for Block Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine has the classic setup of static structure with moving trolley and has an automatic system for changing the thickness between wires. This system makes the machine being very versatile and time saving in changing the thickness of each cut. ·The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for g

Pedrini JUPITER GS210 Singlewire for marble, granite and natural stones blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Pedrini single wire and two wire JUPITER GS210 machines perform cuts on marble, granite and natural stones blocks up to 4200 mm long. They can be used both for squaring and for cutting blocks into slabs. It works with a closed circuit diamond wire and it is manufactured in different configurations and with various automation levels to better suit each customer’s needs. SINGLEWIRE JUPITER GS210 is available in two main versions: fixed and self-moving. This last version can be used individually or

Kodiak 20 Evolution Multiwire for Marble,Granite Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. It is made in different size models, in order to install from 20 up to 84 diamond wires. The machine is exclusively constructed on 4 columns, guaranteeing the best stability and cutting precision. The machine can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent t

Pedrini M585 - Multidisc block cutter for granite, lava stone, marble

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

4 columns block cutter for cutting granite, lava stone and marble blocks into strips by means of a set of vertical diamond discs and a horizontal disc. It works on stationary block. M585 is available in several versions according to the vertical discs maximum diameter (from 1300 to 1700 mm) and to the maximum number of vertical discs (34 or 56 discs). It can be equipped with automatic or semi-automatic unloaders. This 4 columns machine cuts stationary block and produces 460/650 max. wide strips

DUOMATIC GANTRY Multi Wire Saw Machine for Block Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine is mobile and has an automatic system for thickness changing. These characteristics make the machine being very versatile and time saving in loading and unloading operations as well as changing the thickness of each cut. In this machine the user can input up to 10 different measurements for the thickness of the slabs and the machine will move automatically the wires and also will adap

MAXI 3000 RX and MAXI 3500 RX - Sawing Machines with Jumbo Disc for Granite and Marble Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MAXI 3000 RX and MAXI 3500 RX are sawing machines with a jumbo disc for cutting marble and granite at the desired thickness. These machines follow the Simec philosophy of the NT2 block cutters, with 2 columns fixed to the ground and the mobile block carrying trolley, to guarantee the absence of vibration, high productivity and long diamond lifetime.

Genesis GS141-142 Giant Disc Saw Block cutter for granite, marble

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

GENESIS GS141 and GS142 are machines with programmable automatic cycle that were designed for the sawing of 1800 mm max. high blocks, and that are targeted to the production of large thickness slabs for tombstone art, buildings and paving stones in marble, granite and lava stone. Disc programmed down feed can be performed during the last phase of each cutting stroke. Through such technology the disc reciprocates immediately the cutting sense at the end of each stroke thus creating a “PENDULAR“ m

Automatic cycle machine Pedrini M950EF-Giant disc bridge saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This AUTOMATIC CYCLE machine, that was designed for the sawing of 1000 max. high blocks, is targeted to the production of large thickness slabs for tombstone art, building elements and paving stones. The axis positioning is ensured by a PLC controlled system that comprises electronic vector regulators (inverters) and position digital transducers (encoders). Disc down feed can be programmed during last phase of each cutting stroke thus permitting stroke immediate reciprocation and consequent “PEN

Kodiak 15/18 Evolution Multiwire machine for Marble,Granite

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

MAS-70 Giant Disc Bridge Type Stone Block Cutting Machine With Tools

$7,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MAS-70 STONE CUTTING Machine with tools DAP UKRAINE:9000$

Kodiak 84 Evolution multiwire machine for granite blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. It is made in different size models, in order to install from 20 up to 84 diamond wires. The machine is exclusively constructed on 4 columns, guaranteeing the best stability and cutting precision. The machine can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent t

GOLD 2000/7 Diamond Multi Wire Saw Cutting Granite

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Basalt, Quartzite

Machinery Function Features:

The winning synergy: Breton SpA has acquired the Bideseimpianti production division from the Bidese group, a leader in the production of diamond saws for cutting granite blocks. Breton diamond wire saws are covered by a variety of patents, putting them miles ahead of the competition. The synergy between the successful projects and the incomparable know-how of Bideseimpianti, with Breton's technical and planning skills and an excellent after-sales service make Breton diamond wire saws the most re

EASYWIRE - Mono-wire Machine Used to Square Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

EASYWIRE - mono-wire machine used to square blocks and cut slabs Machine used to square blocks and cut slabs (even thick slabs) of granite by means of a diamond wire. Machine structure and mechanisms Handy-designed and functional structure made of heat treated, arc-welded steel, ensuring the required stiffness of the system and cutting precision of the machine.Two opposite carts containing the components for the wire motion, slide vertically along the machine columns by means of screw/nut screw

BRETON GOLD 800- 6 Diamond Multi Wire Saw for Cutting Granite

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Basalt, Quartzite

Machinery Function Features:

GOLD 800/6 Diamond wire saw for cutting granite blocks A complete machine range: Breton diamond wire saws are available in a vast range of models to meet all kinds of production requirements. The range goes from 20-wire machines to 71-wire machines, with a number of intermediate models. It is possible to choose machines to use with 6.3 mm diamond wire, or machines to use with 7.3 mm diameter diamond wire. It is also possible to choose machines that cut a preset nominal thickness of 20 mm, or mac

SPBO 2 Axes CNC Diamond Wire Saw Profiling, Blocks Dressing, Slab Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The SPBO profiling machine of GRANI ROC is designed for a high precision dressing of blocks and slabbing and profiling production from stone blocks. The machine is composed of a static structure and a mobile trolley. All the movements are controlled by a 2 axes CNC panel board. · The movements of the machine are controlled by a 2 axes CNC. The data can be input directly in the CNC or by an ISO code file generated by the CAD-CAM software GraniCAD supplied with the machine. This software allows to

Terzago Block Cutter for Marble or Granite

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Block cutter for Marble or Granite Extremly famous for strenght, relaiability, long time duration

DF 2000-2500-3000-3500 Single wire saw for blocks, slabs

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

DF 2000-2500-3000-3500 Single wire saw for dressing blocks and cutting slabs TOP INVERTER OR FIXED WIRE SPEED Single wire saw for dressing blocks and cutting slabs. Has two main flywheels of large diameter (250 or 200 cm as to the maximum cutting height needed) to maximise the cutting speed and the life of the damond wire. The wire tensioning system is hydraulic. Stiff metallic structure can carry flywheels of diameter either 2000 or 2500 mm. Electronic drop speed control. The machine uses only

DIAMANTFIL DF 2000-2500 PLUS Single wire saw for blocks,slab

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Single wire saw for dressing blocks and cutting slabs; similar to the above wire saw but fitted with a fully electronic control and tensioning system and with a PLC for automatic slabbing. Metallic structure is similar to DF TOP but the system is controlled by a Telemecanique PLC for full automatic control of all machine functions during operation. The switchboard is separate from the machine, and includes a number of safety devices to signal any cutting anomalies. Electronic drop speed control

DIAMANTFIL DF JOLLY Single wire saw with 2-axis CNC system

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Single wire saw for dressing blocks, but fitted with a 2-axis CNC system that enables cutting of two-dimension profiles as well as slabbing. Machine shows all the characteristics of DF PLUS and in addition: capability to cut profiles thanks to a 2-axis CNC system, and to the two pairs of guidewheels that can be rotated electrically round the wire; programming is very easy using either the machine keyboard and monitor, or on an office PC for which we provide an extra copy of the Software; diamond

DIAMANTFIL DF ROLLER Mobile diamond wire machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Mobile diamond wire machine to cut marble, granite and ornamental stones with characteristics and performance similar to the wellknown DIAMANTFIL TOP or PLUS. The machine moves on track so that slabs can be cut from any one of a number of blocks with differing characteristics, placed within the track area. Un electronic programming device controls both the cutting operations and the machine shift between cuts. This allows the machine to operate automatically and continuously.

P.B.N.E. 350 Electronic Giant Disc Bridge Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Large-sized electronic bridge sawing machine for cutting stone material. Very strong and stiff iron casting structure with double beam, mechanically worked by using high quality and precision systems. Features THE UNIQUE FEATURES OF COMANDULLI P.B.N.E. 350 MACHINE Spindle sliding on an assembly of iron casting guides and special frictionless pads in oil bath. Spindle sliding kinematical motion through a timing belt system with variable speed. Bridge traverse on special steel guides with ball rol

Diamantfil DF TWIN CUT Fast Block-Dressing Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Fast block-dressing system including one fixed Diamantfil machine and one Roller. Also includes a block carraige with a turntable. Allows two cuts at the same time at the required distance. For fast squaring of blocks the system has two Diamantfil machines, one fixed and one in the mobile Roller version, and operates with a turntable carriage (with optional electric rotation) to position the block under the machines. Two parallel cuts can be made at the same time and with very little need for pe

DOUBLE TOP Multi Wire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Machine to cut slabs, for up to 2 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).

Pentawire Multiwire Machine to cut slabs

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Machine to cut slabs, for up to 5 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).

Monoblade Intertrade

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The structure of machine is made up of two high quality steel columns and a cross beam, to ensure maximum stability during sawing. Sawing is done by a combined mechanical and hydraulic movement transforming the mechanical movement into a hydraulic one to obtain optimal tensioning, precise and regular sawing of block. The hydraulic tensioning of blade is continuously maintained by electronic instruments fitted in control panel. The machine is supplied with fixed table trolley / rotating table tro

Sirma Stationary single diamond wire machine for squaring stone block, cutting slabs

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stationary single diamond wire machine for squaring stone block or cutting slabs of any thickness. Strong steel structure with two flywheels of 2.100mm diameter. Motorized tensioning system with automatic control for stable operation and the extends the wire life, minimizing the breakages. Optional inverter for driving speed wire between 10-44 m/sec. Motorized block carrying and rotating trolley controlled by inverter.

Benetti Arrow 715 Stationary Diamond Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stationary Diamond Wire Machine Model Arrow 715 for squaring and obtaining thick slabs from marble and granite blocks.Built with a stiff and strong structural steel frame, the machine is equipped with 2 big flywheels diameter mm 2000/ea. which facilitate the rotation of the diamond wire and prevent its fatigue.The machine is equipped with an inverter allowing the operator to vary the speed of the diamond wire from 0 to 40 m/sec.The tensioning of the diamond wire is obtained by means of a hydraul

Simec SW 2000 High Performance Mutli-Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The multiwire SW is definitely innovative both in appearance and performance. It is a machine with a two-column structure made using top-class solutions and components in order to provide the highest reliability standards.

Pedrini Singlewire Jupiter GS200 Machine squaring marble and granite blocks and for thick cuts

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SINGLEWIRE JUPITER GS200 is an open frame single and two wires machine for squaring blocks of marble and granite and for thick cuts. The machine structure is made of two columns strongly fixed to foundations and one connecting transversal beam built in large thickness normalized steel work. Sliders vertical movement is driven through synchronized precision screws, coupled with nuts with anti_drop system and equipped with wear and tear control device. One slider supports both the main motor contr

Double Top Multi Wire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Machine to cut slabs, for up to 2 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).

Bidese Impianti- Poker CNC Diamond Wire Shaping and Squaring Block Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Developed Software which allows easy programming without requiring the presence of the operator during operation. The diamond wire operated motor which controls the inverter, for a change in the speed of the wire if needed. CAD-CAM allows to create the working file and to convert it in the machine language for the working execution.

Simec SW 1200 High Performance Mutli-Wire Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SW-1200 is a stationary multi-wire machine directly derived from the larger SW2000, with which it shares most of the technology solutions, but which is characterized by the useful cutting width reduced to 1200mm and for the smallest number of usable wires.

Bidese Impianti-CNC Polar Junior Artistic diamond wire machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Polar Junior is made to cut the stone in various designs, for artistic purposes. Artistic diamond wire machine with vertical direction of the wire and a bench on which moves the material to be processed. Metal construction, which receives the appropriate heat and corrosion treatment. It is suitable to any working situation.

SIMECWIRE/01 MOB Monowire Plants For Cutting And Squaring Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SIMECWIRE/01 –MOB, besides having the same characteristics of the stationary version, it has the possibility to translate on tracks, thus turning out to be especially suitable to cut slabs. The transmission of the movement on tracks is obtained by a precise pinion-rack system controlled by brushless motors and encoders on both sides, as it takes place on the most precise tool machines. For squaring blocks, the machine can be equipped with a rotating trolley.

Bidese Impianti-Top Wire Junior CNC Diamond Single Wire Shaping Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Artistic diamond wire which creates straight or curved surfaces by combining two axes of flexibility for the machine. Developed Software which allows easy programming without requiring the user's presence during operation. The diamond wire operates with a motor controlled by inverter, for a possible change in the speed of the wire if needed. It also has CAD-CAM program to convert the file into an executable form.

Pedrini Jupiter GS 200 is an open frame multiwire machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Multiwire Jupiter GS 200 is an open frame multiwire machine for the production of slabs that performs blocks fast cutting through a set of diamond wires. Multiwire Jupiter GS 200 exhibits the following fundamental features: precise - structural rigidity, dynamic balancing, accuracy in displacing & sliding hi-tech machine - advanced patents, unique reliable - simple technical solutions, no risk functional - optimization of the yield of the diamond tool versatile - many available models (8, 16, 32

Robot Space 2600 CNC Diamond Wire Profiling Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Robot Space 2600 CNC system with 6 controlled axes for two and three dimensional profiling of marble, granite and other ornamental stone blocks, using diamond wire. Maximum cutting length : 2,6 m Maximum cutting height : 1,70 m Installed power : 27 CV Linear speed of diamond wire : 0 ÷ 40 m/sec Length of diamond wire : 15,5 - 16,6 m Rotation of block bearing trolley : 360° Weight : 10 T Shipping volume : 50 m3