Stonecontact.com offers you the advanced machines of the world's leading machinery companies in every brand, every country and every model for stone surface processing at affordable prices.
Before cutting the natural stone slabs or sometimes after cutting them to cut-to-size, some processing is applied to the stone surface according to the purpose you will use: polishing, grinding, sandblasting, tumbling, flaming, leathering, etc. Thanks to the developing technology, it is now possible to do all of these operations with a single machine today. But depending on your request, you can also find single processing type machines for each surface finishing on stonecontact.com. For example, aging machines, polishing machines, sandblasting machines, flaming machines, tumbling machines, etc.
This machine uses round column as its guide slip surface for steady automatic lifting up and down. The machine is applicable to plane grinding and polishing of slabs with greatly various thickness, tombstones, and stone with design. The worktable can be selected for grinding crafts camber inside and outside.
Type: Stone Factory Machines › Stone Surface Processing Machines › Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Slate, Quartzite
Machinery Function Features:
for polishing the stone by single arm head Model FMSP-2600 Power supply Voltage 380/50HZ MAIN POWER 5.5KW MAX. SLAB SIZE 240×80CM WATER COMSUMPTION 3 M3/Hr OVERALL SIZE 350×65×170CM WEIGHT 850KGS
The machine is applicable to plane grinding and polishing of slabs with greatly various thickness, tombstones, and stone with design. The worktable can be selected for grinding crafts camber inside and outside.
This machine can process any stone material surface, polished surface, rustic surface, and dumb surface etc., this machine not only can polish Mosaic particles but also can polish the finished products and small pieces of plate chips. The polishing thickness from 4mm to 50mm is available, and the more important point is zero damage to the material.
This series machine uses round column as its guide slip surface for steady automatic lifting up and down. The machine is applicable to plane grinding and polishing of slabs with greatly various thickness, tombstones, and stone with design. The worktable can be selected for grinding crafts camber inside and outside.
A. Install a polishing mill to polishing the surface of the plate. B. Litchi surface can be processed on the plate surface by installing litchi surface.
The GSM 1100 is a manual arm designed for grinding, polishing and stamping slabs and monuments made of stone or concrete with maximum dimensions of 2,500 x 1,200 mm. The machine is built with a solid construction that minimizes vibration. The emphasis is on easy handling, which is made possible by two 1,100 mm arms. In the basic version, the spindle is driven by a 5.5 kW engine. The basic version has a vertical motorised shift of 700 mm of the arms on the column. The spindle of the machine has a
GSM 1100 B is the basic version of the machine with the addition of pneumatic arm and column brakes. The machine can be used in addition to the standard grinding, polishing and stocking operations, as well as for drilling with a maximum area of 2,500 x 1,200 mm. The machine is built with a solid construction that minimizes vibration. The emphasis is on easy handling, which is made possible by two 1,100 mm arms. In the basic version, the spindle is driven by a motor with a power of 5.5 kW and a s
SF—2500/3000 uses round column as its guide slip surface for steady automatic lifting up and down. The main drive has two kinds: single speed and double speeds. The machine is applicable to plane grinding and polishing of slabs with greatly various thickness, tombstones, and stone with design.The worktable can be selected for grinding crafts camber inside and outside.
GSM 1100 F is the highest version of the machine, which is capable of grinding, polishing, stocking, drilling and milling with maximum surface dimensions of 2,500 x 1,200 mm. The massive construction of the machine minimizes vibrations and thus the stability of the tool. The emphasis is on easy handling, which is made possible by two arms with a pitch of 1,100 mm separately stored in bearing housings. In the basic version, the spindle is driven by a motor with a power of 5.5 kW and a speed of 12
Wisdom Arm Polishing Machine is made of high grade cast iron. The polishing arms have thick walls to avoid breakage. Quality bearings used in the arm joints and polishing head ensure the arms swing very flexible and long working life. Wisdom Arm Polishing Machine is suitable for polishing the kind of slab with thickness not varying too much.
Wisdom Arm Polishing Machine is made of high grade cast iron. The polishing arms have thick walls to avoid breakage. Quality bearings used in the arm joints and polishing head ensure the arms swing very flexible and long working life. Wisdom Arm Polishing Machine is suitable for polishing the kind of slab with thickness not varying too much.
1. Indigenous double speed main motor, 4.5KW-4/5.5KW-2, Lifting motor power 0.75KW 2. Eletric screw rod for front & back arm lifting 3. Pneumatic lifting head 4. Maximum polishing size 2600x900mm
This machine uses round column as its guide slip surface for steady automatic ups and downs. Two optional main drive motors (single speed and dual speeds) are upon the clients choice. It is applicable to surface grinding and polishing of tombstones, slabs and mosaic which needs to change the thickness frequently. The workable for grinding interior/exterior arcs is available upon customer s request.
The machine adopts a cylinder as the lifting guide surface, which can automatically and stably lift. It is suitable for the plane grinding and polishing of plates, tombstones and parquets with frequent thickness changes. It can also be equipped with a worktable to grind internal and external arc process stone.
The machine adopts a cylinder as the lifting guide surface, which can automatically and stably lift. It is suitable for the plane grinding and polishing of plates, tombstones and parquets with frequent thickness changes. It can also be equipped with a worktable to grind internal and external arc process stone.
The machine adopts a cylinder as the lifting guide surface, which can automatically and stably lift. It is suitable for the plane grinding and polishing of plates, tombstones and parquets with frequent thickness changes. It can also be equipped with a worktable to grind internal and external arc process stone.
Hand Polishing Machine-H1 is a radial arm machine for polishing strips of granite, tombs stone, etc. It works on stone with various thick from 10 to 450mm. The arm moves up and down, driven by a motor. Tools fast change. On request, an air piston can be installed to export the working pressure.
This series machine uses round column as its guide slip surface for steady automatic lifting up and down. The machine is applicable to plane grinding and polishing of slabs with greatly various thickness, tombstones, and stone with design. The worktable can be selected for grinding crafts camber inside and outside.
This machine can process any stone material surface, polished surface, rustic surface, and dumb surface etc., this machine not only can polish Mosaic particles but also can polish the finished products and small pieces of plate chips. The polishing thickness from 4mm to 50mm is available, and the more important point is zero damage to the material.
Type: Stone Factory Machines › Stone Surface Processing Machines › Arm Polishing Machine
Warranty: 12 Months
Usage: Granite, Marble, Slate, Quartzite
Machinery Function Features:
for polishing the stone by single arm head Model FMSP-2600 Power supply Voltage 380/50HZ MAIN POWER 5.5KW MAX. SLAB SIZE 240×80CM WATER COMSUMPTION 3 M3/Hr OVERALL SIZE 350×65×170CM WEIGHT 850KGS
Wisdom Arm Polishing Machine is made of high grade cast iron. The polishing arms have thick walls to avoid breakage. Quality bearings used in the arm joints and polishing head ensure the arms swing very flexible and long working life. Wisdom Arm Polishing Machine is suitable for polishing the kind of slab with thickness not varying too much.
Stonecontact.com offers you the advanced machines of the world's leading machinery companies in every brand, every country and every model for stone surface processing at affordable prices.
Before cutting the natural stone slabs or sometimes after cutting them to cut-to-size, some processing is applied to the stone surface according to the purpose you will use: polishing, grinding, sandblasting, tumbling, flaming, leathering, etc. Thanks to the developing technology, it is now possible to do all of these operations with a single machine today. But depending on your request, you can also find single processing type machines for each surface finishing on stonecontact.com. For example, aging machines, polishing machines, sandblasting machines, flaming machines, tumbling machines, etc.
Ask a Question
Could not find the answer you need? Ask about Slate Manual Polishing Machine.
Questions & Answers on Slate Manual Polishing Machine
What kind of rocks should not be tumbled?View answer⌄
Asked by Visitor
Any rock that has a grainy, gritty, or sandy texture should never be used as tumbling rough. Good tumbling rough will consist only of rocks with a smooth, non-granular texture. When the rocks are broken the surfaces should be smooth to the touch.
China
Czech Republic
5YR
