If you need our help, we will be glad to help you until you find your products.
Skype: StoneContact.com
WhatsApp/Wechat: +86-17689946988
Clear All
Compare (0/4)
Stone Chain Saw Machines
( 67 )Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone. Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water. Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again. Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate. Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
More Hide-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks, and a horizontal arm that can make vertical cuts for squaring off and blocking hard and/or abrasive stones. The cuts can be programmed by means of a computerised system loaded with positioning and cutting parameters.
Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without the need for interventions by an operator.
Fantini cutting machines can be customised with high automation systems, according to customer requirements.
Technical Specifications
Power installed: 50 kW
Max. cutting width (L): 3,500/4,000 mm
Max. cutting height (H): 2,500 mm
Variable chain speed: 0-2 metres/ sec
Variable arm descent: 0-15 cm/min
Width of cut: 27 mm – 38 mm
Machine travelling speed on tracks: 3-30 metres/min
Weight: 14,000 Kg
Technical characteristics may be subject to variations
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
It is possible to equip the Fantini chain saw machine at one single rail with tracks on the end of the rail.
They allow the chain saw to make orthogonal translation movements and to rotate on itself besides to make longitudinal translation. So the machine can freely move and positioning in the cutting area.
Supported model:
-70 version BU
-50.90 version BU
-50.81 version BU
-20.90 version BU
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
The grease loading station is an useful equipment for the ordinary maintenance of Fantini chain saw machines. It includes a compressor, a tank, a greasing pump necessary for recharge the grease for the cutting operations. The station can be transported inside the quarry by lifting it through the barycentric hook or by the coupling device to the fork supplied with machines for blocks handling.
Grease capacity: 180 kg
Compressor power: 2,9 kw
Total weight: 450 kg about
Grease pump technical specification
Compression ratio: 50:1
Min pressure: 4 bar
Max pressure: 8 bar
Max capacity: 0.700 kg/min
Supported models:
- All chain saw machines
- All chain saw machines for underground quarries
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
CHAIN SAW MACHINE Series 70 Sup-H
The chain saw 70 SUPER /H is the most powerful model of FANTINI chain saw machines.
It has a vertical cut capability up to 8,0 m. of depth. It has high performances also in cutting very hard marbles and stones. The chain saw is started by an hydraulic system with a main variable speed pump put on by an electric motor. The electro-hydraulic controls give suitable power and speed in different working condition. The chain saw makes horizontal and vertical cut with no water.
The chain saw is equipped with:
- air cooling hydraulic circuit;
- hydraulic pistons for fast levelling of the chain saw;
- remote push button panel (wire or remote control)
- Power: 61 Kw
- Weight: 9.600Kg
- Arm rotation: 360°
- Chain speed: 0-0,7 mt/sec
- Length of cut: 38 mm
- Useful cutting depth: 8 mt max
- Cutting speed: 3-15 cm/min
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
CHAIN SAW MACHINE Series 20.90
This chain saw machine has been recently produced to make less deep cut (up to 1.30 m) in soft and medium soft stones. It has a high cutting speed that can reach 8,0/10,0 m l/h depending on the type of stone. The cutting chain is started by an electric motor meanwhile the arm rotation and the translation of the machine are hydraulically operated. The chain saw can make horizontal and vertical cut without water.
One rail version (BU):
The chain saw has one translating rail of 5.00 mt controlled by the push button panel. It allows a fast longitudinal replacement of the chain saw without the help of any lifting devices.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
All Fantini chain saw machines can be equipped with a radio remote control.
The radio remote system allows the operator to move around the machine: no cable is needed to be connected to the remote control, so the operator can stay far from the chain saw in a safe position more suitable to check the movements of the chain saw.
Each radio remote control has a unique transmission program set by the producer and unchangeable, so that each transmitter can interact only with its receiver and cannot interfere with any other radio remote controls.
The frequency of work used by the radio remote control can be easily set and changed by the operator between 128 different frequencies. The operator can work even near other radio controlled machines.
Supported models:
- All chain saw machines
- All chain saw machines for underground quarries
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
CHAIN SAW MACHINE Series 50.81
The chain saw machine mod. 50.81 is the first chain saw machine ever produced by Fantini company. It is used in medium soft stone quarries, such as travertine, and can make cut up to 3,40 m. of length.
In hard marble and stone the cutting length is up to 2,80 m. After so many years of production the chain saw is very reliable and it can be equipped with all the optionals of Fantini cutting technology.
The chain saw makes horizontal and vertical cut without water.
The chain saw is equipped with:
- air cooling hydraulic circuit;
- hydraulic pistons for fast levelling of the chain saw;
- remote push button panel (wire or remote control)
Modular rail version (RA/P)
The chain saw is supplied with 3 rails of 3 m of length each
One rail version (BU):
the chain saw has one translating rail of 5.90 mt controlled by the push button panel. It allows a fast longitudinal replacement without the help of lifting devices.
- Power: 50 Kw
- Weight: 5.200-5.700 Kg
- Arm rotation: 180°
- Chain speed: 0-0,7 mt/sec
- Width of cut: 38 mm
- Useful cutting depth: 3,40 mt max
- Cutting speed: 0-25 cm/min
* the technical features may have some changes
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
This model of chain saw machine has been produced for cutting medium soft stones and for cutting and squaring the overturned bench in the quarry. It can be equipped with a blade up to 2,0 m of useful cut. It is produced with just the hydraulic system or also with the electro hydraulic system.
In the version with one rail it can be equipped with systems making it self propelled such as the central piston and the translation tracks.
The chain saw makes horizontal and vertical cut without water.
The chain saw is equipped with:
- hydraulic pistons for fast levelling of the chain saw;
- remote push button panel (wire or remote control)
Modular rail version (RA/P)
The chain saw is supplied with 3 rails of 3 mt of length each
One rail version (BU):
The chain saw has one translating rail of 5.25 mt controlled by the push button panel, it allows a fast longitudinal replacement without the help of lifting devices.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. SV-C 50
Special chain saw machine for back cut of blocks in the underground quarry.
Total power 30 KW
Hidrostatic transmission with variable speed pump
Weight Kg. 8.000
Useful cut up to 1.60 mt (on the right side as well as on the left side)
Hydraulic oil tank capacity Lt. 150
Chain rotation speed from 0,1 to 0,7 mt./sec.
Arm cutting speed rate up to 15 cm/min.
Grease capacity up to 500gr/h
Noise level rate: 85 decibel
Max speed on tracks 1,5 km/h
Chain saw dimensions:
L: 4.600 mm La: 1.300 mm
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To CompareType: Stone Quarry MachinesStone Chain Saw MachinesBackhoe Squaring Chain Saw
FOB Price:
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Chain saw on tractor JCB
The Fantini cutting system has been produced for squaring the blocks on the face wall as well as in the working areas of the quarry. The cutting unit is transported on a wheeled tractor fast moving and positioning in front of the blocks to be squared. The whole operation is fast and does not need any auxiliary personnel nor water.
Power: 68,6 Kw
- Weight of tractor t: about 7.000 Kg
- Weight of cutting unit: 2.000 Kg
- Arm rotation: 90°
- Useful cut up to 4 m.
- Chain speed: 0-0,7 mt/sec
- Cutting thickness : 38 mm
- Tractor translation speed: 40 km/h
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone, Travertine
Machinery Function Features:
The dust Aspirator completely removes the dust in the horizontal cut position as well as in the vertical one. The dust is unload at one side of the sliding rail by a worm screw system.
Before entering in the filtering chamber the dust passes through a pre-chamber which allows to remove the big parts.
- Tender version
The dust aspirator is placed on the rail of the machine and translates with the machine.
Supported models:
-70 sup-H
-70 rap
-50.81
- Static version
The dust aspirator is fixed in the cutting area and connected to the chain saw machine by a suction unit.
Supported models:
- All chain saw machines
- All chain saw machines for underground quarries
Power : 9.0 Kw
Weight : 1.500K g:
Length : 2.660 mm
Width: 1.650 mm
Height: 3.030 mm
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. Gu.50-R-SC/T
This chain saw can make vertical and horizontal cut against the underground face wall. It is a self propelled machine on tracks and completely autonomous in movements, besides it is equipped with a rotation fifth wheel. Only one operator is needed to operate the chain saw. This model of machine can make a cut until 2,0 m of depth in hard stones.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesSquaring Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
MOBILE CHAIN SAW FOR SQUARING BLOCKS Mod. 70 BUC
It is a self propelled chain saw machine on tracked trolley for only vertical cut up to 4,0 m. of depth. The chain saw machine is equipped with one self translating rail and hydraulic pistons. It can self move in different areas of the quarry to cut and square the blocks with no need of water. All the movements of the machine are operated by a hydraulic system with main pump connected to an endotermic diesel motor. The endotermic diesel motor starts the pump for tracks movement.
The machine is equipped with:
- Air cooling hydraulic circuit;
- Remote push button panel (wire or remote control)
- Power: 80 Kw
- Weight: 15.500 Kg
- Arm rotation: 360°
- Chain speed: 0-0,7 mt/sec
- Thickness of cut : 38 mm
- Useful cutting width: 4,10 mt max
- Cutting speed: 0-25 cm/min
- Translation speed on tracks:1 km/h
* the technical features may have some changes.
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
If requested it is possible to install on Fantini chain saw machine a steel frame lifting module for better transport and positioning the chain saw machine in the quarry.
The steel frame lifting module also protects the chain saw.
Supported models:
-70 sup-H current model
-70 rap
-50.90 current model
-50.81
-20.90 current model
Fantini
Italy
Fantini Sud SPA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
TECHNICAL SPECIFICATIONS
Model ST 450.2 VH
Power of main electric motor 45 Kw / 61 Hp
Hydraulik tank capacity 160 Lt.
Cutting width 42 mm
Useful cutting depth 4,20 mt (max)
Rotation of cutting jib 360°
Weight 5.100 kg.
This model is designed for open top quarries.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Limestone, Onyx, Sandstone
Machinery Function Features:
CHAINTRONIC CH60
Chain saw on which all drives are electric and controlled by Inverters. The higher energy efficiency with respect to hydraulic systems and the specific tool arrangement offer significantly better cutting speeds and tool life.
Pellegrini
Italy
Pellegrini Meccanica SpA
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The Benetti's chain saw model CSM 962 is an extremely robust design machine, which can perform primary vertical and horizontal cuts in limestone, marble, and travertine, even in dry conditions.
All movements of the machine are controlled by means of reversible hydraulic transmissions systems, which allow a continuous speed adjustment.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine
Machinery Function Features:
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling, so that no dust is produced during the cutting phase. Another advantage of diamond belt cutting system respect to the traditional one, is that no grease or oil are used, so that the cut is very clean and free from pollution load.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Onyx, Sandstone, Travertine
Machinery Function Features:
Diamond belt sawing machine for vertical and horizontal cuts. The cutting tool consists of a special plastic belt with sintered diamond segments. Only water is used during the cutting phase, both for lubrication and cooling. The system can really be considered “ecological”, because no grease or oil are used during the working phase, so that to prevent dust production and grease pollution. The SUPER JET BELT 950 is electric driven, with electronic control of speed and advance; it can cut up to 400 cm depth.
Intermek
Greece
INTERMEK S.A.
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CHAIN SAW MACHINE mod. HSTK450 2VH
CARATTERISTICHE TECNICHE
TECHNICAL SPECIFICATION
Model HSTK 450.2 VH
Power of main electric motor 45 Kw / 61 Hp
Hydraulik tank capacity 160 Lt.
Operation speed 0 - 44 cm/min
Cutting width 42 mm
Useful cutting depth 2,75 mt (max)
Rotation of cutting jib 360°
Weight of the machine 6.900 kg
Weight of the hydraulic device 1.450 kg
This model is designed for underground quarries, the max cutting height is 4.500 mm.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CARATTERISTICHE TECNICHE
TECHNICAL SPECIFICATION
Model HSTK 450.2 VH
Power of main electric motor 45 Kw / 61 Hp
Hydraulik tank capacity 160 Lt.
Operation speed 0 - 44 cm/min
Cutting width 42 mm
Useful cutting depth 2,75 mt (max)
Rotation of cutting jib 360°
Weight of the machine 6.900 kg
Weight of the hydraulic device 1.450 kg
This model is designed for underground quarries, the max cutting height is 4.500 mm.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
$119000-130000
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
1,The machine can move freely on its caterpiller track, independent of any other hoist machinery.
2,The machine is supported by the four cylinders and moves on its horizontal rail during cutting process. It is suitable for open air quarries.
3, The machine is operated by a wireless controller and is friendly to operator.
Specification:
Max. cutting depth: 4000mm
Max. cutting width: 40mm
Total power: 75Kw
Crawler moving speed: 600mm/h
Weight: 14500kg
Size: 6500x3350x2100mm
Yunfu Xinda Machinery
China
Yunfu Xinda Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Limestone, Sandstone, Travertine
Machinery Function Features:
CARATTERISTICHE TECNICHE
TECHNICAL SPECIFICATION
Model ST 300 VH
Power of main electric motor 33 Kw / 46 Hp
Hydraulic tank capacity 180 Lt.
Cutting width 42 mm
Useful cutting depth 2,50 mt (max)
Rotation of cutting jib 360°
Weight 3.100 kg
This model is designed for open top quarries with soft stone.
Korfmann Cut Machinery
Italy
Korfmann Cut Machinery s.r.l
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
$119000-130000
Warranty: 12 Months
Usage: Marble, Onyx, Artificial Stone, Quartzite, Sandstone
Machinery Function Features:
The basic quarry chain saw model. The chain saws are placed on the stone and the rails are used interchangeably
Each machine can cut both vertical and horizontally
Dry cut, no need to supply of water
Wide application range of quarry and high working efficiency
Yunfu Xinda Machinery
China
Yunfu Xinda Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBeam Chain Saw Machines
$149000-169000
Warranty: 12 Months
Usage: Marble, Limestone, Artificial Stone, Basalt
Machinery Function Features:
The machine is used to vertically cut mining benches, to divide large stone into small ones or to square irregular shaped blocks.
The machine can move freely on its caterpillar track, independent of any other hoist machinery.
Power by diesel engine
Dry cut, no need water supplying
Remonte controlling function.
Yunfu Xinda Machinery
China
Yunfu Xinda Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesTunnel Chain Saw Machines
$139900-169900
Warranty: 12 Months
Usage: Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features:
Underground chain saw can extract high grade marble directly without striping mmaintain skins or soils.
Less requirement on lamd expropriation, less wastes and rubbles, less cost on deslag and revegetation, less environment damage.
Better block shape and higher yield rate
High extracting efficiency without being affected by wether. Even higher efficiency of future expending extracting to sides or downward
Low overall cost and low risks. High long term benefits
Yunfu Xinda Machinery
China
Yunfu Xinda Machinery Co., Ltd
Contact Supplier
-
Add To Compare
Type: Stone Quarry MachinesStone Chain Saw MachinesBank Chain Saw Machines
Warranty: 12 Months
Usage: Granite, Marble, Quartzite
Machinery Function Features:
Orbital-type chain saw is the most basic type,the rails used interchangeably in working, suitable for open-pit mine,each machine can be designed to have two working mode--- vertical and horizontal cutting; Orbital-type chain saw can be designed into the single rail longitudinal mobile model.
Zhongzhu
China
Shang Hai Zhongzhu Industrial CO.,LTD
Contact Supplier
Have a Question? Ask our expert
Ask now
Questions & Answers on Stone Chain Saw Machines
What are quarry chain saw machines max useful cut depth?
Posted by Visitor
Reply to this question
Post ReplyCancel
It is around 2500 to 3000 mm depending on the model of the machine and the hardness of the stone.
Answered by StoneContact
Like
Can a quarry chain saw machine cut granite?
Posted by Visitor
Reply to this question
Post ReplyCancel
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Answered by StoneContact
Like
What is quarry chain saw machines average cutting speed?
Posted by Visitor
Reply to this question
Post ReplyCancel
The slope of the ground and the hardness of the stone affect the cutting speed of the machine, but they can cut 0~4 meters per hour on average.
Answered by StoneContact
Like
