Limestone Granite

Natural Thin Stone Special-Shaped Stone Veneer Saw

$15,000 - $20,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Single Disc Cutting Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

-Powerful 60HP motor -Easily cuts split-face or natural finished stone, brick and other hard stones -Motor Inverter -Belt Motor Inverter -Belt Automatic Amp Control -Thin Stone Veneer Saw is an integral structure, easy to install and transport.

Skema Denver Monoblock Bridge Saw Cutting Machine 3-4 Axes

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

SKEMA Denver 3-4 axis monoblock bridge saw. 3-4-axis monoblock saw with rotating head through 90° (180° opt): easier and faster execution of straight and diagonal cuts. SKEMA is a modern monobloc bridge saw with tilting head and hot zinc coated frame for an exceptionally long lasting sturdiness and accuracy. It features 3 powered axes travelling on steel guideways with revolving balls protected by bellows and lubricated by a centralized system. The 0°-90° head rotation allows width and depth wis

QSDQ-1600 Bridge Type Horizontal blade block cutting machine

$37,000 - $38,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw Cutting Centre–Horizontal

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The bridge type horizontal cutter adopts PLC programmable control and man-machine operation interface, the left and right cutting tools are controlled by frequency converter, and the speed can be adjusted according to the stone material. The up and down lifting adopts hydraulic lifting (or screw rod lifting), the front and rear segments adopt high-precision screw rod nut transmission, and the key parts adopt imported accessories; Combined with the design of horizontal knife, the root of the plat

FLOOR GRINDING/POLISHING MACHINE FOLGORE

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Traditional floor grinding/polishing machines, ideal for work in flats or on medium-large surfaces. Tough machines, compact and reliable. Specific for marble, Terrazzo, soft stone, concrete and similar. Employing special diamond abrasives and resinoids, they are also excellent for working granite and semiprecious stones. A flywheel between the tank and the motor permits levelling of the machine during the work process. Emission of water is regulated by a small valve positioned on the tank cap. E

SPRINTER 825 CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

The SPRINTER 825 CNC is a 5 axis interpolated bridge milling machine particularly flexible, suitable for the production of different types of products such as kitchen tops, bathroom tops, shower trays, engravings, bas-reliefs and various coatings for the building industry. It is a machine that allows a wide range of processes, from cutting, to milling, drilling, shaping and, thanks to the countless accessories, it is possible to carry out these operations simultaneously without moving the piece

WANLONG Stone Machinery PLC-700 Laser Bridge Cutting Machine

$23,000 - $25,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

PLC-700 is a computerised machine with cutting head that can rotates 0-45°. The touch-sensitive screen, nagnetic grid system etc that make the machine high accuracy, stability and efficiency in cutting. It is particularly an ideal machine for high-value and large size thicker marble, granite etc slab processing.

TC1200 CNC Bridge Saw 5-axis numerically controlled cutting and shaping centre

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The TC1200 is a genuine 5-axis numerically controlled cutting and shaping centre. It allows cuts to be made in all directions automatically without moving the slab. Very innovative, the TC1200 allows you to carry out very simply and with very high precision all cuts in materials up to 425 mm thick. Standard equipment: Cross Laser Line Laser Lubrication unit Remote control Touch-screen 15″ console Optional extras: Fixed, mobile or tilting table Tool sensor Camera Software: Included: Express Jobs

Multi Disc Cutting, Profiling, Grooving Multipurpose Manual Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Multipurpose Manual Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

This machine is considered a multi purpose machine, which can be used for cutting, profiling, decoration making and lining by using a long shaft supported from two sides.On this machine a strips of minimum 8 mm up to 600 mm can be cut and profiles up to 600 mm can be made and any decoration using profile disc can be made with high productivity

MILLENNIUM 420 CNC 4X Daytona Jumbo Work Center

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MILLENNIUM 420 CNC 4X Daytona Jumbo Work Center: It is our high-end work center. A unique machine and a benchmark in the market due to its characteristics, among which stand out a robust monoblock structure, all movement systems in an oil bath and a total protection system in stainless steel. We make the MILLENNIUM420 CNC 4X Daytona Jumbo machining center in accordance with the highest quality standards for CNC machining centers, which guarantees maximum productivity and precision, high levels o

DRUM 100 Floor Polishing Machine

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Travertine

Machinery Function Features:

DRUM 100 is the model shown in the photos below N. 8-11-14-15 and 16 also performs the professional smoothing of the parquet as it has a powerful dust extraction incorporated inside the bodywork, which are channeled into two rear chimneys. to which the dust bags of the classic roller sanders for parquet are tied. As you can see in photo 15 above the abrasive roller for sanding stone floors, there is another cylinder and the adjustable tensor on which the classic parquet belt runs which is used f

Mini Air Filter For Air Polisher

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Quartzite

Machinery Function Features:

Even though it is the smallest filter in the industry, this air filter prevents drain and water from entering into the air tool. Q1.Although an air filter is provided with Compressor, does it need another air filter? A1. Unfortunately the provided air filter can not remove Drain completely. Compressed air contains not only Drain but also water and oil which are failure cause. We recommended using air filter. Q2.How long is there difference between using air filter and using without air filter? A

Dal Prete JUST WATER 3.0 Filtration System

Type: Stone Factory Machines › Stone Factory Cleaning Equipments › Water Treatment Equipment

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Just Water 3.0 is a clarified water filtration unit composed of two filters, J and W. The J filter is a 25 m3 mesh filter with an automatic rotary cleaning system. Filter W refines the filtration process by retaining particles up to 5 m3. Just Water 3.0 guarantees a constant, high-quality water flow to the CNC spindle units even during self-cleaning. Who we designed it for: > If you have one or more CNCs. With this filter you don't use new water and therefore you reduce your water costs. > If yo

BRIDGE SAW VICTORY NICE

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

VICTORY NICE is a semi-automatic bridge saw designed for cutting slabs to size with high accuracy and speed. It works with a wide range of materials including marble, granite and artificial compact materials. Due to smart design and intelligent processes VICTORY NICE has become the reference semi-automatic bridge saw in the market. Variablity of blade size and a rotating table provide for flexibility in job performance. Advanced user-friendly program and intuitive 10’’ touch-screen display help

MEC7-VE Universal 3-Phase Floor Grinder, Stone Floor Grinding and Polishing Machine

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Grinding and polishing three phase machine with variable speed for all kind of stone floors: marble, terrazzo, concrete, granite and hard stones. ADVANTAGES MEC7-VE floor grinder is a powerful and high-performance model to work any kind of stone floor: Three-phase motor driven by frequency inverter thus improving machine output. Selection of four different speeds to optimize working of the floor. Machine level adjustment by eccentric wheel axis. Transport handle and pivoting wheel facilitate mac

Pneumatic Drilling Machine With Displacement (MPF-D) - CERES

Type: Stone Quarry Machines › Quarry Drilling Machine › Pneumatic Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Fixed Drilling Machine with Displacement for cutting blocks. This pneumatic machine is ideal for vertical cuts. It is equipped with adjustable feet. Allows longitudinal and transversal inclination. Flexibility of control position. Water jet opens and closes at the same time as the hammer is activated. It is equipped with 4 hydraulic cylinders that allow side shift.

Manual and automatic flocculant stations

Type: Stone Factory Machines › Stone Factory Cleaning Equipments › Water Treatment Equipment

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

This station allows to prepare and dose automatically the flocculant.

TWISTER 97 portable combined hydraulic machine for profiling, trimming and polishing

Type: Stone Hand Held Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The TWISTER 97 is a portable combined hydraulic machine that can perform three different operations. Infact it can be used for: 1) profiling, trimming and polishing marble and granite slabs from 20 mm to 100 mm with the help of diamond wheels perfectly shaped 2) effecting straight cuts, curved and ecliptical 3) smoothing and honing flat surfaces.

SNM-DEI Heavy Duty Monoblock Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Sandstone, Travertine

Machinery Function Features:

The SNM-DEI is a heavy duty monobloc bridge cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite. Cement etc... it is easy to handle and maintenance free. The main structure is made of heavy duty steel in order to ensure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates which are machined on five sides. The bridge is made of a very s

Wall Molding Saw WLS 500 For Precise Cutting Of Miters

Type: Stone Factory Machines › Stone Tile Cutting Machines › Single Disc Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Wall molding saw for precise cutting of miters. Our wall molding saw is specialized in precise cutting of miters and in cutting to length wall molding, glue arounds and skirting boards up to 150 mm high.

Sharp- RHINO Designed Bridge Saw Machine- Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Automatic mitre strip cutting / 90 degree cutting head rotation / 360 degree work table rotation / 85 degree tilt table Features – Precise cuts – Our RHINO designed Bridge Saw also comes with Mitre-Cut for when you require 45 degree cuts – X and Y axis 90 degree rotation – Features a turntable work table that can also tilt up to 85 degrees

Anchor Hole Drilling Machine For Stone Anchorage

$900 - $1,000

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Anchor Hole Drilling Machine for Stone Anchorage Application:Stone hand drill machine for wall mounting bracket is used with diamond drill bits to drill holes for undercut anchors in ceramic or stone panels of granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board, etc. For exterior and interior wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, tools. Advantages: 1. High quality with long life.

CTS-3500-22FW Single Wire Block Squaring Machine

$40,000 - $48,000

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

CNC-3500 adopts CNC system, four linkage, use 16 surfaces slideway, 28pcs roling wheels structure. And synchronousifting through intermediate drive, with 360 rotary troley, cuting stable and with high efficiency, t can dress 4 surfaces.Moreover.as it's with CNC system, i can process the column slab, pllar, numeral, letter, Chinese characters and other shapes for the stone.

CHJJ-1500 CNC Circular Slab Stone Cutting Machine- Column, Arc Slab Cutting Machine

$22,500 - $26,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Arc Slab Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone

Machinery Function Features:

Fujian Xianda CHJJ-1500, Circular slab stone cutting machine adopts CNC system control ,the band saw which operates around the central axis, slicing blocks is controlled by the worktable automatic feeding. It has the features of lower energy consumption and small saw kerfs(3MM saw kerfs), saving blocks, simple blocks , simple operation ,high precision and high efficiency .Processing diameter range is bigger than 600mm( including 600mm), which is the ideal choice for processing marble block to ci

EM13 - Profiling Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Profiling Line Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

EM13 - The Profiling Machine • Belt Width: 500 mm • Number Of Heads *Optional: 4 • Working Thickness: 10 – 100 mm • Head Motor Power: 7,5 kW • Belt Motor Power: 0,75 kW • Total Electric Power: 31 kW • Belt Speed: 0 – 4,9 m / min • Diameter Of Socket: 240 – 300 mm • Water Consumption: 120 Lt / min • Machine Dimensions ( W / L / H ): 1500 / 4000 / 1800 mm https://ekizoglumakina.com/en/product/profilling-machine-em13

Wisdom Thin Stone Veneer Saw Machine Mighty Stone Saw

$15,000 - $20,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Single Disc Cutting Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

-Powerful 60HP motor -Easily cuts split-face or natural finished stone, brick and other hard stones -Motor Inverter -Belt Motor Inverter -Belt Automatic Amp Control -Thin Stone Veneer Saw is an integral structure, easy to install and transport.

WANLONG QSQ-1200A/1600A Vertical Plus Horizontal Cutting Machine

$28,500 - $30,500

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

QSQ-1200A 1600A has vertical and horizontal blade working on the same machine. It is designed as per the understanding of processing marble or granite block into slabs and tiles. Strong motor power,heavy-duty steel body, and user-friendly operation system as well as easy-to- maintain of machine that is an ideal machine for choice.

Easy to operate internal combustion core drill high efficient hand held gasoline rock drill

$350 - $690

Type: Stone Quarry Machines › Quarry Drilling Machine › Gasoline Rock Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Internal combustion rock drill can be used in drilling of mine,splitting of cement and asphalt road,breaking and shoveling of rock. It is mainly used for blasting holes and other drilling works in quarries, railway construction,water conservancy construction and defence project facility.It is suitable for drilling and blasting under various of rocks at any direction angles. Features: 1. No need change the hand spare parts, just open the handle as required, then start to work. 2. Simply operation

SYQJ-600 Manual Edge Cutting Machine

$4,300 - $4,500

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Manual edge cutting machine adopts the joint structure, and the main machine can be 45 ° Rotation, electric lifting, trolley hand drive, compact structure, beautiful appearance, stable performance, high machining precision.

45-55-75 Kw Marble-Granite Wire Saw Cutting Machine

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Main Engine: 55 kW - 75 hp / 1000 rpm 380 V Main Engine Torque: 550 Nm Output System: Star - Delta Motion Motor: 0,75 kW - 1 bg / 1500 rpm 380 V Movement System Torque: 2865 Nm Movement System: Rear Wheel Drive Motion control: Speed control + ammeter 360 setting motor: 1,1 kW - 1,5 hp / 1500 rpm 380 V 360 input system Torque: 2310 Nm 360 direction system control: switch XY motion, motor: 0,75 kW - 1 bg / 1500 rpm 380 V XY Motion system torque: 1216 Nm XY Motion system control: Switch XY Movement

Bridge Mountain Quarry Cutting Machine-Wire Saw Block Dressing Machine

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Bridge Mountain Quarry Cutting Machine-Block Dressing Machine

BTC-2200/2500/2800 Bridge Type Block Cutting Machine

$32,000 - $38,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Fujian Xianda BTC-2200/2500/2800, this machine use inverter to control the left-right feeding,it can adjust the speed according to different kind stones. It uses hydraulic lifting system, forward-backward slicing use high-precision screw nut driving, automatic slicing ,main parts adopt imported materials;The block can be placed in the ground directly to save workable and its maintenance costs;Thus the whole machine is featured as high cutting efficiency ,high slicing precision, flatness of plate

Thin Veneer Mighty Stone Saw For Irregular Stones

$15,000 - $20,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Single Disc Cutting Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

-Powerful 60HP motor -Easily cuts split-face or natural finished stone, brick and other hard stones -Motor Inverter -Belt Motor Inverter -Belt Automatic Amp Control -Thin Stone Veneer Saw is an integral structure, easy to install and transport.

WANLONG Stone Machinery LMQ-2200/2500/3000 Gantry Cutting Machine

$22,000 - $25,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

LMQ-2200/2500/3000 Gantry Cutting Machine is used for cutting stone block. The elevation of blade is driven by crossbeam to increase the cutting flatness and processing scope. Sliding speed of blade on the crossbeam is adjustable.

Y6 Y20 Y24 YT24C Y26 Jack Hammer Pneumatic Hand-held Rock Drill Machine

$150 - $800

Type: Stone Quarry Machines › Quarry Drilling Machine › Pneumatic Hand-Held Rock Drill Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

1. Y20&Y24 are intended for dry drilling, YH24 for wet drilling 2. Suitable for either drilling downward or incline of blast holes in medium-hard rock, of for second blasting operation. 3. Centrally grouped control, nimble starting, stable running and easy maintenance. Instruction of Y24 The rock drill is widely used for dry drilling in the medium-hard and hard rock(f=8-18). It's suitable for drilling works in surface mine, quarry for boulder blasting and other dry drilling working. FY200B oil r

XZQJ-800 Tiltable Bridge Stone Cutting Machine

$25,500 - $26,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

laser stone cutting machine It uses PLC system and human-machine interface,combined with high precision magnetic ruler to locate and infrared device,uses inverter to control left-right feeding,adjusts the speed according to the stone material. It use hydraulic lifting system,main electric parts adopt imported good-quality materials, the head can rotate 0-45 degree with a wide using range. Thus the whole machine is featured as high cutting efficiency,high cutting precision,high stability,easy-ope

DLC-1400 Automatic Roman Pillar, Hollow Column Slot Cutting Machine

$16,000 - $20,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Arc Slab Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

DLC-1400 automatic processing Roman pillar slot stone cutting machinery adopts microcomputer control,good processing,assembly process,with automatic accurate positioning,ect.,dedicated to the roman column slab.

Stone Machinery LMX-3850/4850 Granite Marble Block Squaring Cutter

$26,000 - $27,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This machine is specially designed for block squaring. With wide-span gantry structure, it is suitable for large block processing.

DRM-300 Vertical Stone Drilling Machine For Granite And Marble

$7,000 - $8,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Drilling, Slot Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Machine structure reasonable,flexible operation,high production efficiencyMainly used for tombstones,stone lanterns crafts,and other deep-processing.

Mining Tools YA19 YT24 YT27 YT28 YT29A Hand Held Pneumatic Air Leg Rock Drill Jack Hammer

$280 - $600

Type: Stone Quarry Machines › Quarry Drilling Machine › Pneumatic Hand-Held Rock Drill Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Mining Tools YA19 YT24 YT27 YT28 YT29A Hand Held Pneumatic Air Leg Rock Drill Jack Hammer For Sale The YT28 rock drill machine is a kind of high efficiency air leg rock drill machinery. It is mainly used for blasting holes and other drilling works in a quarries, railway Construction, water conservancy construction and defence project facility. It is suitable for drilling and blasting under various of rocks at any direction angles. Blast hole dia is 34-42mm, drill hole depth is 5 m. This machine

Slab Polishing Machine

Type: Stone Factory Machines › Stone Surface Processing Machines › Slab Polishing Line Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone