Marble Limestone

SNIC 6 Disks Splitter SNM-REF Multi-Blade Tile Cutting, Trimming Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

General Characteristics The Horizontal splitting machine allows doubling the production of the block-cutter by splitting in two pieces thik slabs cut on the latter. Placed on the beginning of the marble line it feeds it continuously increasing production and lowering cost. The machine is manufactured in two models: with 2 or 4 tables. in the REF1x62, 1 pair of opposed spindles are placed so that every blade can cut half of the width of the material. The REF4x62, is equipped with two pairs of opp

Pedrini Microwave Resinline plants for marble and granite

Type: Stone Factory Machines › Resin Line Machines › Infrared Slab Drying-Filling Line

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

RESINLINE MICROWAVE is a unique tailored technology in the world, composed of a combined warm air and microwave oven for the resin treatment of marble and granite slabs. Combining efficacy of warm air ventilation with microwave quickness, RESINLINE MICROWAVE allows to resin all kinds of stone material and to restore their flaws; the obtained resin curing type permits to polish the slabs immediately after the treatment. Every plant is proportional and customized according to the required automati

Small Stone Block Cutting Machine (70-120) Cm

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Arm Block Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Used for cutting relatively small stone blocks and its available with different motor power, rail and table size to meet the customer requirements.

50.90 Quarry Bank Chain Saw Machine

Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines

Warranty: 12 Months

Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lif

Brembana Sprint Numerically Controlled 5 interpolated-axis bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Numerically Controlled 5 interpolated-axis bridge saw equipped with tilting head and fixed table to carry out any type of machining, cutting (straight or shaped, vertical or inclined), 3D profiling and milling operations, on slabs and stone blocks. This machine can work one shot or step by step to shape marble, granite, composite stone and ceramic pieces. The 4.250 mm stroke of the bridge guarantees easy machining of large sized slabs or stone blocks. Brembana sprint is also available with the f

WORK CENTER IMAGE320 CNC 3 axes

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

IMAGE320 CNC 3 axes work center performs all kinds of work with great accuracy and speed. This work center has been designed in order to perform jobs of any level of sophistication with guaranteed high quality. IMAGE320 CNC 3 axes proficiently executes all tasks requiring milling, grinding, drilling and polishing. This work center is simple to program and can be handled by an operator with little computer knowledge.

T558 Multipurpose Flat Polisher, Profiler, Bush-hammering, Calibrating for Countertops, Gravestones

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

A multipurpose machine More than only a flat polisher, the T558 can perform various operations like bushhammering, calibrating with satellites head, or texturing works using the know-how THIBAUT has developed for many years. The T558 can be used to work concrete: flat, concave or convex surfaces. The runway length is adjustable according to your needs and your workshop area. An extremely sturdy machine THIBAUT used all its know-how for the conception of this machine, as well as its knowledge of

Filter Press Covering structure/housing

Type: Stone Factory Machines › Stone Factory Cleaning Equipments › Water Treatment Equipment

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

It is very important to cover the filter press not only to protect it against adverse weather conditions, but also to safeguard the clothes, which can be damaged by the direct sunlight.

Automatic Multi Head Cutting Line N2990 5+7, Tile Cutting Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Our cutting line N.2990/2200-5+7C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it. The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained. The entire line is characterized by the robustness and reliability of the machines that make it up, all o

Denver Tecnika 5 Axis Monoblock Bridge Sawing Machine-CNC Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Denver Tecnika 5 axes monoblock bridge sawing machine. The evolution of the most famous high-performance monoblock saw machine on the market.

VICTORY Bridge Cutter With Rotary Head V2

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

VICTORY Bridge Cutter with Rotating Head equipped with an automatic head rotation system of 0° and 90°. The head movements in 3 axes plus the inclination of the head for miter cutting, allow high-speed cutting of boards and increase productivity by more than 30% compared to conventional bridge discs. With the automatic head tilt, the 45° miter cut can be done very quickly and simply. Automatic work programs for complete exploded views of boards thanks to rotation and the new software. Automatic

EDTM Automatic Single Head Stone Polishing Machine

$12,000 - $18,000

Type: Stone Factory Machines › Stone Surface Processing Machines › Single Head Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Esuton EDTM type single head stone polishing machine is one automatic stone polishing machine, it has wide range of applications, it can be used to polish granite, marble, quartz stone slab, marble, terrazzo tile and so on. This machine was controlled by PLC automatic working system it can move and polish automatically, the polishing way has horizontal, vertical and ring three moving model to meet different polishing requirements. Worktable: for big slab the worktable can do 0-85 tilt for easy l

Caterpillar Bucket Tooth Pins Lock J350,J400,J450,J550,J600,J700,J800

$1 - $2

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Minimum Order Quantity: 500 PCS HRC:38°-42° Material:40Cr Place of Origin: Ningbo,China Certification: ISO9001:2008 Packaging Details: Carton box + Wooden case Delivery Time: 25-30 days after confirmation of the order Payment Terms: T/T Supply Ability: 500 tons per month

Strip Cutting, Edge Trimming Machine, Sizing machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

HEAD CUT SIZING MACHINE Machine Dimensions (mm) 4000x2000x1500 Cutting head movement (mm) 800 Maximum Saw Size (mm) / 400 Saw Speed (rpm) 1400/2900 Saw Engine Power (kW) 9 kw Installed Power (kW) 1 Machine Weight (kg) 1800

Forklift Boom FB3LP-5420

€1,454

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The boom extension is designed so that it cannot be pulled all the way out The boom is firmly secured onto fork blades by two bolts located at the back of each fork pocket and restraint pins Durable powder-coat finish

Slabs Loader and Unloader Acrobat

Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite

Machinery Function Features:

DOUBLE FACE FILLING-DISCHARGE ROBOT-ACROBAT

HR-2 Multidisc Strip Cutting Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Cutting machine multidisc HR-2 Ref. 8704 The HR-2 type cutting machine performs a single pass longitudinal cut to materials of different thicknesses and different sizes. By having 2 axes it allows cutting high thicknesses.

TRM 600 Multi-Blade Cross-Cutter, Strip Cutting, Edge Trimming Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

TRM 600 Multi-Blade Cross-Cutter, Strip Cutting, Edge Trimming Machine

SCHIND BIG BRO 3520 Vertical And Horizontal Bridge Cutting Machine For Small Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Vertical-Horizontal Block Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

SCHIND Big Bro 3520 which is designed to process with small blocks and thick stones or to size more marble and granite slabs in one time. The operator has the opportunity to cut both vertically and horizontally at different angles by this new model.

ZSW Linear Vibrating Feeder

$20,000 - $40,000

Type: Stone Quarry Machines › Rock Crushers, Jaw Crushers

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Vibratory feeding, even and stable conveying Large capacity, continuous and smooth feeding Withstand large materials, impact resistant and durable Sturdy structure, reliable operation with low failure rate Adjustable feeding volume, flexible application Low energy consumption, low noise, easy maintenance Suitable for mining, sand and aggregate, building materials production line

Caterpillar Excavator Track Bolt Nut And Plow Bolt Nut 6V1723/CR4135

$1 - $2

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Minimum Order Quantity: 500 PCS HRC:38°-42° Material:40Cr Place of Origin: Ningbo,China Certification: ISO9001:2008 Packaging Details: Carton box + Wooden case Delivery Time: 25-30 days after confirmation of the order Payment Terms: T/T Supply Ability: 500 tons per month

Pivot Forklift Boom PFB1-2600

€1,341

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The boom extension is designed so that it cannot be pulled all the way out The boom is firmly secured onto fork blades by two bolts located at the back of each fork pocket and restraint pins

SMK-D 600 (TABLE 90 degrees) Monoblock Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite

Machinery Function Features:

The Bridge cutting machine monoblock structure of a completely steel chassis with no vibration provides a sensitive and rapid processing. ( AUTOMATIC ) The system takes the automatic mode, the hive moves manually down, the wagon moves automatically and starts to cut the salab and once the blade goes out of the slab it turns back to the start point and waites there. ( Semi-automatic ) The sizing data is entered on the screen and the system takes the sizing mode. The slab sizes are entered, the sa

HLS Automatic Multi-Blade Cross-Cutter, Trimming Machine- Parallel Cutting Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Parallel cutting multiheads HLS Ref. 8601 HLS multi-head parallel machine has high precision and waste reduction. Long tile slitting is performed continuously, without interruptions using advanced technology that controls spindle movement on the bridge and all phases of processing. The HLS machines transport tiles on the support table. This table has a continuous rubber strap for immediate removal of debris from the cutting cycle.

LSX Screw Sand Washing Machine

$40,000 - $70,000

Type: Stone Quarry Machines › Rock Crushers, Jaw Crushers

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Good cleaning effect, high sand cleanliness Spiral structure, large processing capacity Good dewatering effect, low moisture content Less fine sand loss, high recovery rate Stable operation, low energy consumption Simple structure, easy maintenance Suitable for sand, mining, building materials industry

Pivot Forklift Boom PFB2-3450

€1,897

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The boom extension is designed so that it cannot be pulled all the way out The boom is firmly secured onto fork blades by two bolts located at the back of each fork pocket and restraint pins Adjusts from 0 to 52 degrees

Komatsu Excavator Track Bolt Nut And Plow Bolt Nut 175-35-11210/KM378

$1 - $2

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Minimum Order Quantity: 500 PCS HRC:38°-42° Material:40Cr Place of Origin: Ningbo,China Certification: ISO9001:2008 Packaging Details: Carton box + Wooden case Delivery Time: 25-30 days after confirmation of the order Payment Terms: T/T Supply Ability: 500 tons per month

Marble Edge Profiling, Polishing Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Profile machines are machines for turning the sections of marble or travertine VE Similar bars into profile. We have models with 4-5-6 heads. Various forms can be made to the edges of the stones with the profile blades attached to these heads. Heads can be adjusted manually up / down forward / backward. There is a Guide Support System in the machine. STONE THICKNESS 20 MM 60 MM NUMBER OF HEAD 5 PIECES SOCKET DIAMETER 250/300 MM MOTOR POWER 7.5 KW BAND MOTOR 1.5 KW LENGTH 4500 MM EN 2000 MM WEIGH

HR4 Parallel Cutting with Independent Heads- Heavy Multiblade Trimming Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Parallel cutting with independent heads HR4 Ref. 8602 The Parallel cutting machine type HR4 is designed for the longitudinal cutting of a single pass of strips and tiles, this machine regulates the distance between the discs guaranteeing maximum flexibility in the change of measures.

OZKKM CRUX CNC Bridge Saw 5 Axis Stone Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

OZKKM CRUX is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of CRUX is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be expl

Fork Extensions - Standard

€385 - €585

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

A fast and efficient way of handling lightweight loads of bulk. The fork blade extensions are invaluable when it comes to loading or unloading material out of the back of pick-up trucks. The fork extensions slide over the blades and are locked onto them by tightening the two bolts on the back of each fork extension. They are further restrained by a heel pin that fits behind the existing fork blades.

Helios Jet Waterjet Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Waterjet Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Helios Jet is a fast and performing 3/5 interpolated axes waterjet saw. It has been developed for high precision cutting processes on porcelain, compact surfaces, quartz, as well as marbles and granites. It is the essential waterjet that gives you the fundamental versatility of waterjet cutting. Engineered with the same technology as the other Helios cutting solutions, the Helios Jet features robust cutting capabilities and user-friendly software for added flexibility. Learn more here: https://w

Jolly Floor Cleaning Machines

Type: Stone Maintenance Machines › Floor Cleaning Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The JOLLY version has the motor crankcase in fiber glass whereas the SL version in aluminum. Professional floor cleaning machines, reliable and versatile. Designed for recovery, mirror-polishing and in-depth cleaning of floorings in marble, Terrazzo, ceramics and Grès porcelain. The use of specific diamond and resinoids pads means that ITC mono-brushes can remove deep stains, scratches, porosity and excoriations created over time, leaving the surface smooth, shiny and clean. The more economical

T552 Flat Polisher Machine Multipurpose Milling, Polishing, Plastering, Edges Profiling

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

A multipurpose machine More than only a flat polisher, the T552 can realise various operations like bushhammering, calibrating with satellites head, or texturing works using the know-how THIBAUT has developed for many years. The T552 can work on various types of materials, such as concrete, marble, granite, or even glass…, even on concave or convex surfaces. The runway length is adjustable according to your needs and your workshop area. A complete working autonomy With its tool magazine, the T55

5 Axis CNC Bridge Saw CSA 598 Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The 5 axis bridge saw CSA 598 synonymous with precision, reliability and economy. Combined with an autoloader, a band saw table and a manipulator for automatic removal of the sawn workpieces, the result is a high performance sawing system for industrial production. The modular machine concept of the CSA 598 also allows the machine to be equipped with a 2D or 3D waterjet head. By combining a bridge with waterjet head and a saw bridge, the performance of the plant can be significantly increased, e

Zenit CNC Single Head Polisher, Calibrator

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Calibrating Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Zenit is the a 3 interpolated axes CNC polishing / calibrating machine with automatic tools change, for the treatment of marble, granite and agglomerate surfaces. It allows to calibrate, polish, smooth, brush and also drill, to perform engravings, straight and curvilinear cuts with incremental passes by means of diamond milling tools. It is an extremely flexible machine, ideal for those who need a complete equipment to treat even particularly delicate surfaces or to finish mosaics or inlays. Its

70RA-PD Quarry Bank Sawing Machine

Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines

Warranty: 12 Months

Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Chain Saw Model 70.RA/PD can make cuts of up to 5.1 metres, and was designed and built to make vertical and horizontal cuts on hard and/or abrasive stones without the need for cooling water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for any electrical wiring connections to generators or power grids. This model is particularly useful in working environments that are not connected to the power grid. Technical Specifications Instal

Mosaic Cutting Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Mosaic Cutting Machine

Automatic Multi Head Cutting Line Machine N2990 6+9- Multi-Blade Cross-Cutter,Trimming Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Our cutting line N.2990/2200-6+9C has been designed to obtain maximum production with minimum operator labor and maximum reliability in the machines that comprise it. The general dimensions of the production line have been adjusted to the needs of the client, following the criteria established by it, in terms of the dimensions of the pieces to be manufactured and the final products obtained. The entire line is characterized by the robustness and reliability of the machines that make it up, all o

Pedrini Resining plants for marble and granite

Type: Stone Factory Machines › Resin Line Machines › Automatic Filling-Resining Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

RESINLINE is the range of plants manufactured by Pedrini for the resin treatment of marble and granite slabs and/or strips. RESINLINE plants upgrade processed materials mechanical and esthetical features and allow for commercialization of stones not useable in their natural conditions. RESINLINE plants are customized according to processed product, resin type, required automationlevel, available area conformation and are realized to perform various productive speeds starting from 6 up to 60 cycl