Travertine

KDMJX-16C/20C/24C Automatic Polishing Marble Granite Machine Series

$51,500

Type: Stone Factory Machines › Stone Surface Processing Machines › Slab Polishing Line Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1)PLC system equipped to control the horizontal swing of the cross beam and vertical movement of the polishing heads. 2)Each polishing spindles has central automatic lubricating systems for longer service life and working smoothly. 3)It adopts V-belt to transmit power so as to keep their structural properties against sudden strains. 4)This machine is capable of polishing straight flat-squared 1.5 to 3 cm thick marble, granite, or engineered stone edges at 380cm per minute.

LTMG 220 HP Dozer Bulldozer-TL220

$36,800 - $37,000

Type: Stone Quarry Machines › Quarry Heavy Equipments › Dozer

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1.Weichai engine and high-efficiency fuel injection pump features high torque, high performances, high parts universality, and low maintenance cost. 2.The electronically controlled static pressure drive system equipped can automatically adapt to the load variation and provide best bulldozing speed under different working loads. 3.The intelligent matching technology can achieve best working efficiency and most reasonable fuel economy, with the composite fuel consumption reduced by 10~15%. 4.The e

Excavator Bucket Teeth 18S,22S,30S,30TVC,35S,40S,45S

$5 - $20

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

EM04 - Hydraulic Mosaic Stone Crushing / Splitting Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

EM04 Hydraulic Mosaic Stone Crushing Machine • Working Width: 10 – 70 mm • Working Height: 20 – 100 mm • Working Length: 10 – 300 mm • Belt Width: 75 mm • Belt Motor Power: 0,37 kW • Hydraulic Motor Power: 4 kW • Hydraulic Tank Capacity: 60 lt. • Working Pressure: 110 bar • Machine Dimension ( W / L / H ): 1400 x 1100 x 1100 mm • Automatic Crushing Control With Sensor

IDEA PLUS WIDE Numerically Controlled Machine Centre With 3 Axis Stone Carving,Engraving Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Numerically controlled machine centre with 3 interpolated axis (X-Y-Z), for working of marble, granite and natural stones. Designed for the realization of articles for funerary art , furniture and costruction works. In its design particular attention has been paid to the reduction of noise and dust in the environment. Electro-spindle controlled by inverter for the variation of speed, Internal and external cooling water system for the tools. The machine is equipped with a stainless steel tank for

Wimac Gantry Crane

Type: Stone Factory Machines › Stone Handling, Loading Machines › Gantry Crane, Overhead Cranes

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Wimac Crane Systems, double girder gantry crane systems with the weight of a person can lift the weight of the floor and the floor is more easily and safely transport and we are helping you to remove. As Wimac Crane Systems, we manufacture double girder gantry cranes up to 200 ton lifting capacity. Our double girder gantry cranes are generally used in outdoor areas. In addition, it is easy to use in closed areas. Especially in the production and stockpiling of iron and steel, in shipyards, ports

Multi Wire Saw Machines For Marble Granite Slabs Cutting

$300,000 - $500,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1. Adopt international brand of motor/inverter/electronics to maintain the stable working and excellent performance; 2. Stainless steel covers with three coating and painting ensures the good protection from the rusts,especially in the water and dust working condition. 3. Ergonomical and user-friendly design makes it easy for operator to run the machine, especially for assembling the wires and regular maintainence.

Undercut Drilling Machine For Anchor Bolt

$900 - $1,000

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Undercut Drilling Machine For Anchor bolt Application:Stone hand drill machines are used with diamond drill bits to drill holes for undercut anchors in ceramic or stone panels of granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board, etc. For exterior and interior wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, tools. Advantages: 1. High quality with long life. 2. High working efficiency. 3.

Multi Head Stone CNC Machine 3D Stone Carving Machine With 4 Spindles

$6,000 - $8,600

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This stone CNC machine with multi-spindle and has a variety of machining functions. Firstly, it can meet a variety of work pieces at the same time, improving production efficiency. If you have a processing need for mass production, consider this machine. 1. Equipped with a counter top with a sink, the machine is more suitable for machining work pieces in the stone industry or in metal. 2. The water spray function can reduce the wear on the spindle during processing, thus extending the life of th

SZ-300 Stone Drilling Machine

$5,500 - $6,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Drilling, Slot Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SZ-300 Stone Drilling Machine, adopts round column as its guide slip surface for steady automatic ups and downs. The main drive has two kinds: single speed and double speed. It is mainly uses for stone drilling and tombstones tank processing.

4 Heads Stone Bevel Edge Polishing Machine For Marble Granite

$15,000 - $35,000

Type: Stone Factory Machines › Stone Surface Processing Machines › Slab Polishing Line Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1. For flat and bevel edge polishing 2. Easy to change pad, saving much time for switch grinding pad. 3. Constant pressure automatic compensation, break the conventional compensation way and keep the surface brightness same. 4. Automatic warning when it runs out of processing stone.

KXJ-LY-2200 Gantry Mono Wire Saw Machine

$46,000 - $51,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The machine is designed to cutting slabs and dressing block. can do vertical cut and horizontal cut both

Jib Crane

$1,800 - $3,000

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Crane

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

A fexible column-type crane to quickly and easily handle and move slabs into place.Column is 4.5 meter height. Beam is 4.5 meter length. Rotates 360°. As for a lifting device, an electric hoist capacity 1 ton is available. Wall Mounted and Free Standing are available. Lifting motor 1.5Kw.

DNFX-3000 Computerized Profiling Cutting,Polishing Machine

$11,000 - $13,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 18 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The profiling machine is divided into a single arm type and a gantry type. The operating system has PLC programmable control, and CNC computer-controlled, to meet the different customers requirements. The single-arm profiling machine has a small body and does not occupy space, and is suitable for processing stones with smaller specifications. The workbench uses oil-immersed sealing rails. Double-knife design with higher cutting efficiency, better stability and easy operation. The gantry of profi

LTMG-360 HP Crawler Bulldozer With Customizable Shovel

$119,176 - $126,518

Type: Stone Quarry Machines › Quarry Heavy Equipments › Dozer

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1.Power System ● The installed electronically controlled engine conforms to the China-III non-road machinery emission regulation, featuring strong power, high efficiency and energy-saving, and low maintenance cost. ● The radially sealed intake system is applied to effectively prolong the engine life. ● The cylinder moves forward to improve the efficiency of the hydraulic system. The lifting system is operated centrally by the left hand. 2.Drive system ● The curves of drive system and engine are

Excavator Bucket Teeth60sv2sd,65SV2SD,70SV2SD,75SV2SD,75SV2RXL,85SV2SD

$80 - $150

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Quartzite, Sandstone, Travertine

Forklift Boom 25 / Stone Lifter Boom / Slab Boom

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Packaging Detail: Manufacturer's export standard packing Delivery Detail: 7 days after getting payment

1500 Bar High Pressure Watet Blast Machine For Stone Process WP-15028

$55,000 - $57,000

Type: Stone Factory Machines › Stone Surface Processing Machines › Water Blast Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

High-pressure water blasting surface: spray directly on the cutting surface. Super power water will break down the crystal structure of stone so as to show 100% color and shinning texture.

TOOLSTAR Multi Wire Saw Machine For Slabs Cutting

$300,000 - $500,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1. Adopt international brand of motor/inverter/electronics to maintain the stable workingand excellent performance; 2. Stainless steel covers with three coating and painting ensures the good protection from the rusts,especially in the water and dust working condition. 3. Ergonomical and user-friendly design makes it easy for operator to run the machine, especially for assembling the wires and regular maintainence.

Decorative Stone Breaking Machine For Chopping Mushroom Face

$3,200 - $8,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

As a leading factory for waste slab and block processing, Bestlink has supplied the professional stone machines to many countries, like USA, Norway, Egypt, Brazil, India, Russia and Mexico, etc. From the feedback from our clients all of the world, the quality of the machines from Bestlink is getting better and better, and more and more clients are gonna to have the stamping machine and splitting machines. This machine helps to pare the 4 edges of slate and sandstone into mushroom face, for slate

Custom ATC 2113 Granite Engraving Machine With Rotary Device For Sale

$17,000 - $25,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Compared with other stone marble engraving machine, this ATC 3D CNC machine was designed with carousel automatic tool changer. Different knives can be installed in tool holder, the working efficiency can be greatly promoted.

Anchor Hole Drilling Machine For Panel Anchors

$5,500 - $7,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Drilling, Slot Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Anchor Hole Drilling Machine For Panel anchors Equipment Introduction：This stone drilling machine is used to drill undercut anchor holes in stone panels, concrete panels,ceramic plates,and other cladding panels. Such as granite, marble, travertine, sand stone, crystal glass, quarz, ceramic, etc. Equipment features： ·Easy to operate ·2 heads can work together or work by single head ·Automatic drill Equipment configurations： ·Assembled with aqua storage tank and desk universal roller ·Electric con

Vertical Lathe Machine-Column Cap and Base Profiling Machine PLC or CNC

$16,500 - $26,500

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Column, Balustrade Lathe Machine

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Vertical Lathe Machine-Column Cap and Base Profiling Machine PLC or CNC

Five Axis Machining Center - CNC Working Center

$120,000 - $150,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This leader 1500 (five axis machining center) adopts a high-end five axis linkage CNC system, imported BT spindle, imported linear guide rail , rack drive and bus absolute serve control . It has the advantages of multi-function ,high precision, and strong ability . This equipment includes regular cutting functions, profiling processing , garden special -shaped processing , high end villa stone processing function,etc. and is mainly aimed at medium and large stone products. It can be cut and carv

Wisdom Automatic Thin Slab Cutting Machine For Composite Stone

$10,000 - $30,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1.This thin slab cutting machine is the basic equipment for process marble, composite slab, it used band saw horizontal cut slab in to thin slab. 2.Auto hydraulic tension device is adopted to keep band saw hydraulic tension stable. 3.the band saw has Uniform equality force and stable tension, longer service time, easy operation. Machine auto cutting control by PLC control, to increase efficiency.

KXJ-LY-1500 Gantry Mono Wire Saw Machine

$40,000 - $45,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The machine is designed to cutting slabs and dressing block. can do vertical cut and horizontal cut both

Toksel Wavy Profiling Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 24 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

how are these surface applications possible on this machine the key word is technology of Toksel that's why we call it one way bridge once you make up your mind for Toksel you will be the winner

Art G15/F Steel Bed for Milling Machine

Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Art G15/F Steel bed for milling machine, palletizable, complete with double layer of wood planks 5 5 cm Sizes Weight Capacity 350 x 180 x 65h cm kg 630 kg 4000 350 x 200 x 65h cm kg 720 kg 4000 other dimensions on reques

Horizontal Splitting Machine- Ozteknik OZYYM 630x8

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Saw Elec. Motor : 22 kwa 6pcs Saw Elec. Motor : 18.5 kwa 2 pcs Conveyor Belt Engine : 0.37 kwa 1 Piece Bridge Lifting motor : 1.5 kwa 1 Piece Saw (No: 1 - 2) : 625 mm 2 Pcs Saw (No: 3 - 4) : 650 mm 2 Pcs Saw (No: 5 - 6) : 650 mm 2 Pcs Saw (No: 7 - 8) : 850 mm 2 Pcs Bridge movement : Manual and Elec. Engine with (Digital)

LTQJ-600 Infrared Integrated CNC Bridge Cutting Machine

$25,500 - $26,500

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

LTQJ-600 is controlled by computer. Cover an area of an area small, easy installation Suitable for mass production of stone processing machinery and equipment. the cutting head can oblique cutting with 90 degree, and the worktable can stand up with 85 degree. Precision manufacturing assembly and special side-beam protection device and touching-type operating system which make our machine with high precision, stability and efficiency, and easy to operate, and so on. it is very suitable for high-v

LTMG-18 Ton Crawler Excavators

$49,033 - $51,852

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1.Purpose built for mining The major stress locations are reinforced to resist against severe working conditions. Using advanced engineering and software, we carefully analyze each structure to create durable, reliable machines for tough applications. 2.Work in comfort The full size ROPS and OPG certified cab is quiet and comfortable. Fully adjustable suspension seat can maximize comfort levels and reduces operator fatigue. 3.Reduced maintenance costs Convenient maintenance means less cost. The

Excavator Bucket Teeth V17SYL,V23SYL,V33SYL,V43SYL,V61SD,V71SD,V81SD

$5 - $20

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Terna Fantini Squaring Chain Saw Machine-Block Sawing Machin

Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines

Warranty: 12 Months

Usage: Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Terna FANTINI Block Sawing Machine The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank. As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works

LM30-CE Marble 1-Phase Floor Grinder for Marble, Terrazzo, Concrete

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Grinding and polishing single phase machine specific for marble, terrazzo, concrete and similar floors. LM30-CE is a simple and powerful floor grinder, it is the most used single-phase model. Aluminum tank with epoxy powder finish. Machine level adjustment by eccentric wheel axis. Optional planetary head to optimize working on all surfaces.

MARMO SHARPENER– Sharpening Diamond Wheels, Diamond Tools

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

The MARMO SHARPENER is the ideal solution for stoneworking professionals, offering advanced technology for for tool redressing and sharpening. Entirely designed and manufactured in Italy with a patented design by Marmoelettromeccanica, this machine represents the excellence of Made in Italy. With the ability to enhance any profile, even the most complex geometries, this device ensures efficiency and long tool life thanks to its water cooling system that prevents clogging. Equipped with an ISO 40

Precision Bridge Cutter SNM-FR Slab Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

General features: The bridge cutting machine SNM-FR is used for reducing marble and granite slabs into strips and tiles. The motor is directly mounted on the spindle. The spindle unit moves vertically by means of an electric motor and reduction gear. The operating head is moved back and forward along the bridge by a rack and pinion assembly driven by a reduction gear motor. It is installed on a slide that moves on the bridge on hard-chrome plated guides protected by suitable caters. The slide mo

ECHO 725 CNC Bridge cutting,milling,drilling,shaping machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The ECHO 725 CNC is a 5/6 axis interpolated milling machine particularly flexible, suitable for the production of different types of products such as kitchen tops, bathroom tops, shower trays, engravings, bas-reliefs and various coatings for the building industry. It is a machine that allows a wide range of processes, from cutting, to milling, drilling, shaping and, thanks to the countless accessories, it is possible to carry out these operations simultaneously without moving the piece from the

TWISTER PLUS Portable Stone Router, Edge Profiling, Polishing, Core Drilling, Milling Machine

Type: Stone Hand Held Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The TWISTER PLUS is a patented portable machine for shaping and polishing, core drilling, milling, bush hammering, creating recessed plains, honing flat surfaces, cutting etc. It is provided with nylon anti scratch sliding wheels and water jet holes. It could be also provided with a base plate with water planing system. The Twister Plus has a speed regulation from 2000 to 6000 rpm.

GP 800 Automatic Bridge Type Block Cutting Machine for Marble

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 24 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

AUTOMATIC BRIDGE BLOCK CUTTING MACHINE FOR MARBLE TYPE “GP 800” To get stripes with max height of 40 cms. directly from the marble block. BENCH AND UNDERBENCH GROUP bench entirely made in seasoned cast-iron, reinforced and accurately worked. Its dimensions complete with side brackets are 3,50 x 2,00 mts. To the bench are applied the prismatic and flat wheels which support heavy loads. The wheels slide on special steel guides accurately worked and with very high resistence. The bench is complete

Manual Scratching Machines for Paving

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Practical and manoeuvrable machine for manual scratching work (fine or coarse) depending on the pitch of the mounted roller, suitable for work on previously laid materials. Different types of roller can also be applied, also for satin finishing. The tools are made of the highest quality pure widia and can be reground, thereby lengthening their lifespan.