Quarry diamond wire saw machines are practical wire cutting machines designed to be used in marble, limestone, sandstone, granite quarries. Of course, in order for this machine to be used, the location of the quarry is as important as the hardness of the stone to be removed from the quarry.
The fact that the machine is not too heavy provides ease of relocation.
These machines are sometimes used to cut the stone from the quarry as blocks, and sometimes to cut the edges of the removed stone blocks into a standard shape.
In addition, these machines can be used for cutting large concrete masses in various construction projects or demolition works.
The advanced design and manufacturing technology applied, the diamond wire saw machines are suitable for opening granite, marble and sandstone quarries. The quarry wire saw machine head can be adjusted and rotated automatically. Vector frequency converters are equipped to ensure stable torque output. The feeding speed can be adjusted automatically by the constant tension control system. The setting is fixed, so the cutting condition always remains optimum. The operation panel can be wire-controlled and remote-controlled, the monitor can display instantaneous current, feed rate and cutting data.
Functions and Features: Being controlled by two sets of inverters and applying constant tension control principle, the moving speed of the machine can be adjusted automatically according to the changes of the cutting force to make sure the diamond wire saw be in the best cutting condition all the time. The machine is without phase request. It doesnot need to change or distinguish the power phase. The machien has the following protection functions: wire broken protection, over-loading protection,
Usage: Mining raw materials.Features: using the original digital inverter control, diamond bead rope can be adjusted within the range of 0-40 meters per second, can achieve the best results, the main motor power of 37-110KW and other specifications, three-phase 380V, cutting process of high automatic extent, quite intelligent.
1.Being controlled by two sets of converters, and applying constant tension control principle, the moving speed of the machine can be adjusted automatically according to the changes of the cutting force to make sure the diamond wire saw be in the best cutting condition all the time. 2.The machine is without phase request. It doesn’t need to change or distinguish the power phase. The machine has the following functions: wire broken protection; over-loading protection; open-phase protection; termi
Functions and Features: Being controlled by two sets of inverters and applying constant tension control principle, the moving speed of the machine can be adjusted automatically according to the changes of the cutting force to make sure the diamond wire saw be in the best cutting condition all the time. The machine is without phase request. It doesnot need to change or distinguish the power phase. The machien has the following protection functions: wire broken protection, over-loading protection,
The machine head can be adjusted and rotated automatically. Imported vector frequency converters are equipped to ensure the constant torque output. The feed speed can be adjusted automatically by the constant tension control system. The adjustment is stable, so the cutting condition always remains the best.
No more requirements on the power phase. Switching function manually or automatically, this realized unmanned control or one person control multiple machines. Standard Diamond Wire Saw Machine The advanced dual - conversion technology , which can realize the real - time monitoring、 current the main motor & speed during cutting, it applies to all kinds of granite and marble mining. Automatic cutting. It works on the principle of constant tension, which can adjust the speed and precision automatic
Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features: Diamond wire running system by electric motor The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:
The LGR 1 machine was build for execution of little diamond wire cutting on marble, stones, etc., but also in order to solve problems in building and artistic processing. The effectiveness of LGR 1 machine is confirmed by the extreme ease of working and the processing and cutting speed of the diamond wire. Thanks to this system the operations can be carried out without dust, noise and vibration, being able to perform cutting of any thickness, size and slant on stones like squaring or preparatory
· The machine is built with electro-welded steel and cast iron that guarantee the stability, rigidity and strength required to face any condition of working and ensure a long life of the equipment. · The head of support and rotation of the main motor is built of cast iron. · The main motor, electric and direct to the main wheel, is an 8 poles motor in the case of the 50 and 75 HP machines and 6 poles motor in the 100 HP ones; with them, the maximum torque of the motor is achieved in the normal s
22 KW MACHINE TECHNICAL SPECIFICATIONS. ELECTRIC MOTOR 22 KW 30 HP 380V PULLEY DIAMETER 500 MM WALKING AMPERMAL CONTROL MOTOR MOVEMENT TWO WAY (FORWARD-BACK) WALKING SYSTEM KRAMEYER GEAR - REDUCER PULSE OPENING 180 DEGREE WIRE TURNING CAPACITY 35-45 MT WIRE CUTTING SPEED 5-12 M2 (VARIABLE) RAY LENGTH 3 MT MACHINE WEIGHT 450 KG CE Certificate *** 30 KW AUTOMATION MACHINE ELECTRIC ENGINE 30 KW PULLEY DIAMETER 600 MM WALKING AMPERMAL CONTROL MOTOR MOVEMENT TWO WAY (FORWARD-BACK) WALKING SYSTEM KRAM
Diamond Wire Saw Machine - SS 60 Optima developed the SS 60 machine to suit Indian quarrying conditions. In addition to a completely user-friendly design, the machine has a bolstered weight of 1900kg. This provides better stability and accuracy in quarrying. For maximum efficiency we provide a comprehensive service package which includes training, commissioning and operative instructions.
Discovery 4 is our Ultimate version in CNC Diamond Wire Saw Machine. Lifting structure adopt 16 surface slideway,28pcs rolling wheels structure. Trolley using double nut structure, the track using steel frame-type reinforcement structure; Cantilever geerbox use S-type channel waterproof structure. Main motor have variable frequency speed control function, with more advantages during processing, like cutting more precision, precision more durable, cutting more stable, more efficiency, etc. Meanwh
WE MANUFACTURE WIRE SAW IN 20 HP, 40 HP, 60 HP AND 75 HP VARIANTS. OUR WIRE SAWS ARE USED IN STONE QUARRIES, EARTHMOVING AND RCC CUTTING APPLICATIONS. THIS WIRE SAW IS DESIGNED IN CONFORMATION TO INTERNATIONAL STANDARDS.
15KW 18.5KW 22KW small block trimming diamond wire saw machines are especially designed for stone block trimming work both in quarry and factory, and high starting trorque and variable speed for small cut of the benches or squaring of marble and granite blocks; When supplied with proper peripheral speeds, for controlled demolition of construction as well.
E.T.M.T 80 MOUNTAIN CUTTING MACHINE Power :55kw 75 hp 1400dk 380V380V Ac 3 Phaze Command : Command (Cable) Pulley :The Pulley Is Mechanics In 360 degree 80cm Diameter Forward and Back Transcation of the Pulley:250mm Rising of the Pully :Gear whell Water Volume :60dk-120lt Walking :Automatic,speed Control With (Inventör) Cutting Capacity :8-16m2 As to Hardness Additions :3 Piece 2 m Rails Weight :1500kgs Length :2350mm Height :1400mm Width :900mm
The diamond bead wire saw for mining is an important piece of equipment used in the extraction and processing of stone materials. Its main feature is the use of diamond beads as cutting tools, which are linked together by a wire to form a cutting tool with high hardness and wear resistance. The working principle involves the high-speed rotation of the diamond beads making contact with the rock surface to achieve cutting.This equipment offers several advantages, including High cutting efficiency、
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Engine power 100 Hp Variable speed 0-45 mt / s Flywheel 1000 mm SpeedCut, the fastest diamond wire cutting machine on the market is a high productivity product for the dimension stone industry. As the fastest machine of its kind, SpeedCut enables you to cut at speeds up to 45 m/s. A unique, patented wire tensioning system makes it possible to combine high cutting speed with low wire consumption by utilizing load cells technique.
Quarry Diamond Wire Saw Machine to extract stone from land. Extracting stone from land. Cutting big block / boulders on site. Small cutting loss / Smooth cut surface. Low sound cuttng.
Remote controller gives control (coverage area "50mt") and protect any accidents if diamond wire breaks. Cable connection provide control within 8 mt. Electrical distribution board and control board installed on machine. Unibody machine helps easy transportation. Main power (input) cable plug-in and run. Automatic feed motion gives two different speed. -Main Motor : 75hp 1500 Rpm -Feed Motian Motor: 1.5 Hp 1500 Rpm -Flywheel Daiameter: 800 Mm. -Rails: 2 Mt. 3 Ea (Total 6mt.) -Guilde Flywheel : Ø
Let's think about the construction machinery work machinery first diesel engine by running the engine and the whole load is transferred to the hydraulic system hydraulic engine in our hydraulic machinery, leaving the whole engine to the hydraulic system It offers more strong ropes than the machines in its own group. Since it is hydraulic system, it offers cutting possibility at desired speed. Between 0-1200 cycles. Marble-Granite-Basalt-Travertine Due to the hydraulic system, electrical engine c
SS20 is designed to work on smaller cuts up to 25 sq.m., such as in block dressing of stones. This machine can be customized for unique cutting requirements. It also complements SS 60 and has a similar installation and services package. 20 HP 960 RPM A.C. Electric motor 1 HP DC motor coupled with gearbox for traveling movement Electrical control panel with 10 meters control cable and dimmer control of machine Three traveling tracks of 2 meters each 600 mm main pulley coupled directly on motor Sw
9kw,11kw,15kw diamond wire saw machine can be used for block dressing in quarry or in stone factory.Low cost ,easy operation,portable and easy mainttainance in stone mine! Controlled by inverter.it can adjust feeding speed according to cutting situation.And guarantee the perfect cutting condition!.
Diamond Wire machines VIP 910 ELECTRONIC DIAMOND WIRE SAW Machine properly studied and manufactured to cut big blocks, boulders and benches, when diamond wire speed adjustment is required. An inverter device is used to control and constantly adjust the diamond wire speed from 0 to 40 m/sec., according to the type of stone. The combination with the automatic feeding system by means of “supercard” or inverter, allows a very accurate management of the cutting tool and a very smooth and precise move
1.Controlled by inverters and PLC industrial control module, the moving speed of the machine can be adjusted automatically with the changes of the cutting force so that the diamond wire saw be in the best cutting condition all the time. 2.The lateral moving and the rotation angle of the cutting head are controlled and driven by electric motor,which enables the machine to work normally under harsh circumstance with moisture and dust. 3.The machine can be operated manually and automatically. 4.The
1. Using frequency converter + PLC control, the motor can be stepless speed regulation 2. Using digital communication, the control circuit is simple and the failure rate is low. 3. Control panel is fixed HMI screen. It's waterproof and dust-proof, which also has dynamic display images and working information, like input voltage, cutting data and working time. 4. Intelligent fault detection of equipment system, alarm protection and prompt solutions, timely treatment,user friendly 5. Using PID tec
Model KM / KG Power of main electric motor 50 / 60 Hp Diamond wire saw speed ( with inverter ) from 0 up to 41mt/sec Rotation cutting head 360° Hydraulic lateral translation 1600mm Weight of the machine 1560 / 1600 kg The wirecutters KORFMANN are equipped with hydraulic positioning system and electronic control of advance. The version G for granite have diamond wire speed control by electronic inverter.
Dazzini Macchine Series 1000-Diamond wire cutting machine Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features: Diamond wire running system by electric motor The electronic system of feed control is extremely accurate an
The machine cuts on the top rail on its own. Since the machine is fixed in 5 different regions while cutting, there is no gap and continuous cutting when cutting, this means more cutting than rail machines. Machine control wired remote controller Feet hydraulic system adjustable
800mm Aluminum Flywheel for Wire Saw Machine The 800mm aluminum flywheel is specially designed for wire saw machines used in stone quarrying and block cutting. Made from high-quality aluminum alloy, it features lightweight construction, excellent balance, high strength, and strong wear resistance. The rubber-lined groove provides stable wire movement and helps reduce vibration during operation, improving cutting efficiency and extending the service life of the diamond wire. Customized flywheels
TELESCOPIC EXTENSIBLE DIAMOND WIRE MACHINE WITH WHEELS- ELECTRA Ref: 163 The L Telescopic Wire Machine with Wheels is designed for squaring (transforming raw material into blocks). It operates autonomously and moves using wheel-based locomotion. It features automatic wire tension adjustment and horizontal adjustment to fit the size of the workbench. The machine includes data management and memory functions. Patented technology. Key Features and Specification Function: Squaring raw material (ston
Type: Stone Quarry Machines › Quarry Wire Saw Machine
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
Engine power 100 Hp Variable speed 0-45 mt / s Flywheel 1000 mm SpeedCut, the fastest diamond wire cutting machine on the market is a high productivity product for the dimension stone industry. As the fastest machine of its kind, SpeedCut enables you to cut at speeds up to 45 m/s. A unique, patented wire tensioning system makes it possible to combine high cutting speed with low wire consumption by utilizing load cells technique.
Discovery 4 is our Ultimate version in CNC Diamond Wire Saw Machine. Lifting structure adopt 16 surface slideway,28pcs rolling wheels structure. Trolley using double nut structure, the track using steel frame-type reinforcement structure; Cantilever geerbox use S-type channel waterproof structure. Main motor have variable frequency speed control function, with more advantages during processing, like cutting more precision, precision more durable, cutting more stable, more efficiency, etc. Meanwh
Quarry diamond wire saw machines are practical wire cutting machines designed to be used in marble, limestone, sandstone, granite quarries. Of course, in order for this machine to be used, the location of the quarry is as important as the hardness of the stone to be removed from the quarry.
The fact that the machine is not too heavy provides ease of relocation.
These machines are sometimes used to cut the stone from the quarry as blocks, and sometimes to cut the edges of the removed stone blocks into a standard shape.
In addition, these machines can be used for cutting large concrete masses in various construction projects or demolition works.
The advanced design and manufacturing technology applied, the diamond wire saw machines are suitable for opening granite, marble and sandstone quarries. The quarry wire saw machine head can be adjusted and rotated automatically. Vector frequency converters are equipped to ensure stable torque output. The feeding speed can be adjusted automatically by the constant tension control system. The setting is fixed, so the cutting condition always remains optimum. The operation panel can be wire-controlled and remote-controlled, the monitor can display instantaneous current, feed rate and cutting data.
Ask a Question
Could not find the answer you need? Ask about Travertine Quarry Diamond Wire Saw.
Questions & Answers on Travertine Quarry Diamond Wire Saw
What are wire saw machines used for?View answer⌄
Asked by Visitor
Continuous type wire saws are used to cut walls and other large constructions and stone quarries. Continuous type saws are used to cut silicon wafers for the semiconductor and photovoltaic industry. Diamond-impregnated wire saws are used in machine shops to cut metal parts.
Can a wire saw machine cut through metal?View answer⌄
Asked by Visitor
Concrete wire sawing is used to cut through steel and reinforced concrete. Concrete wire sawing gives the most precise cuts on ridges, beams and piers when it comes to making openings in thick walls or removing large concrete structures.
A wire saw is an effective tool when it comes to cutting, but they use abrasion instead of saw teeth for cutting. When compared with other cutting methods, wire sawing offers significant advantages over other cutting methods in various applications