Match Your Image Post Your Needs
2024-06-19 04:06:50

Travera Marble

About FAQ Products & Prices Order Now
  • Travera Marble
  • Travera Marble Tile
  • Travera Marble Tile
About
Material Type: Marble
Origin:PakistanPakistan (Balochistan)
Priamry Color(s): Beige
Accent Color(s): Beige,Grey,Gold
Recommended Usage:Kitchen and bathroom countertops, commercial tops, gravestones, bathroom countertops, building stone, ornamental stone, interior, exterior wall applications, wash basins, stairs, mosaic, waterjet pattern
Additional Names:Beige Travera Marble,Tervera Marble,Travera Beige Marble,Travera Cream Marble,Tavera Marble,Travera Limestone
Finished Surface:Polished,Bush Hammered,Tumbled,Brushed,Honed,Split,Machine Cut,Natural Surface,Sandblasted,Acid Washing,Combed,Leathered,Water Jet,Filled,Chiseled,Pickling
show more hide
FAQ Ask a Question
showmore

How thick is Pakistan's Travera Marble slabs?

Pakistans Travera Marble slabs typically come in various thicknesses, ranging from 2 cm (0.79 inches) to 3 cm (1.18 inches). However, the exact thickness can depend on the specific supplier or manufacturer and may vary slightly.
Pakistans Travera Marble slabs typically come in various thicknesses, ranging from 2 cm (0.79 inches) to 3 cm (1.18 inches). However, the exact thickness can depend on the specific supplier or manufacturer and may vary slightly.
show more hide
showmore

What color cabinets goes with beige Travera Marble floor?

There are several options for cabinet colors that would go well with beige Travera Marble floors: 1. White Cabinets: White cabinets provide a clean and fresh look that complements the neutral tones of beige marble. They create a bright and spacious feel in the room. 2. Light Gray Cabinets: Light gray cabinets can add depth and sophistication to the space. They create a stylish and modern look while still harmonizing with the beige marble. 3. Natural Wood Cabinets: Natural wood cabinets, such as light oak or maple, can bring warmth and natural beauty to the room. They create a cozy and inviting atmosphere, while still complementing the beige marble. 4. Cream or Ivory Cabinets: Cream or ivory cabinets can create a soft and elegant look when paired with beige marble. They provide a subtle contrast without overpowering the natural beauty of the marble. Ultimately, the choice of cabinet color depends on personal preferences and the desired overall aesthetic of the room. It is recommended to obtain samples or consult with a professional to ensure the chosen cabinet color harmonizes well with the beige Travera Marble floor.
There are several options for cabinet colors that would go well with beige Travera Marble floors: 1. White Cabinets: White cabinets provide a clean and fresh look that complements the neutral tones of beige marble. They create a bright and spacious feel in the room. 2. Light Gray Cabinets: Light gray cabinets can add depth and sophistication to the space. They create a stylish and modern look while still harmonizing with the beige marble. 3. Natural Wood Cabinets: Natural wood cabinets, such as light oak or maple, can bring warmth and natural beauty to the room. They create a cozy and inviting atmosphere, while still complementing the beige marble. 4. Cream or Ivory Cabinets: Cream or ivory cabinets can create a soft and elegant look when paired with beige marble. They provide a subtle contrast without overpowering the natural beauty of the marble. Ultimately, the choice of cabinet color depends on personal preferences and the desired overall aesthetic of the room. It is recommended to obtain samples or consult with a professional to ensure the chosen cabinet color harmonizes well with the beige Travera Marble floor.
show more hide
showmore

Can Pakistan's Travera Marble be used indoors?

Yes, Pakistans Travera Marble can be used indoors for flooring, countertops, wall cladding, and other decorative purposes. It is known for its unique patterns and natural colors that give a luxurious touch to any space. The marble is highly durable, resistant to scratches, and requires low maintenance, making it an ideal choice for indoor applications.
Yes, Pakistans Travera Marble can be used indoors for flooring, countertops, wall cladding, and other decorative purposes. It is known for its unique patterns and natural colors that give a luxurious touch to any space. The marble is highly durable, resistant to scratches, and requires low maintenance, making it an ideal choice for indoor applications.
show more hide
showmore

What is the coefficient of friction of Polished Pakistan's Travera Marble tiles?

I dont have access to specific information on Polished Pakistans Travera Marble tiles. However, the coefficient of friction can be measured using different testing methods and equipment. It also depends on various factors such as the type of surface, the force applied, and the angle of inclination. It is best to consult the manufacturer or a professional for specific information on the coefficient of friction for a particular type of tile.
I dont have access to specific information on Polished Pakistans Travera Marble tiles. However, the coefficient of friction can be measured using different testing methods and equipment. It also depends on various factors such as the type of surface, the force applied, and the angle of inclination. It is best to consult the manufacturer or a professional for specific information on the coefficient of friction for a particular type of tile.
show more hide
showmore

Is it OK to use Travera Marble tile in a shower?

Yes, it is generally suitable to use Travertine Marble tile in a shower. Travertine is a type of natural stone that is commonly used for bathroom and shower tile due to its durability, natural beauty, and water resistance. However, it is important to properly seal the marble tile to protect it from water absorption and potential damage. It is also recommended to periodically re-seal the tile to maintain its appearance and longevity.
Yes, it is generally suitable to use Travertine Marble tile in a shower. Travertine is a type of natural stone that is commonly used for bathroom and shower tile due to its durability, natural beauty, and water resistance. However, it is important to properly seal the marble tile to protect it from water absorption and potential damage. It is also recommended to periodically re-seal the tile to maintain its appearance and longevity.
show more hide
showmore

How can I drill Travera Marble tiles without cracking?

Drilling Travertine marble tiles requires careful and precise techniques to avoid cracking. Heres a step-by-step guide to help you drill Travertine marble tiles without causing any damage: 1. Choose the right drill bit: Use a diamond-tipped or carbide-tipped drill bit specifically designed for drilling through hard materials like marble. These bits will reduce the risk of cracking. 2. Mark the drilling spot: Measure and mark the exact spot where you want to drill. Use a pencil or masking tape to make the mark. This will help guide your drill and ensure precision. 3. Secure the tile: Place the marble tile on a stable surface, such as a workbench or sawhorses. Use clamps or a vacuum base to firmly hold the tile in place. This will prevent it from moving or vibrating during the drilling process. 4. Prepare for drilling: Fill a squirt bottle or a spray bottle with water. This will be used to keep the drill bit and the marble cool during the drilling process. Marble can heat up quickly, leading to cracks and damages, so keeping it cool is crucial. 5. Start drilling: Begin drilling at a slow speed with light pressure. Apply enough pressure to make contact with the tile but avoid pushing too hard. Let the weight of the drill do most of the work. Drilling at a low speed and with a light touch will help prevent cracks. 6. Maintain cooling: While drilling, intermittently spray water onto the drill bit and the drilling area. This will help keep the temperature down and prevent overheating, which could lead to cracking. 7. Take breaks: Occasionally pause the drilling process to allow the bit and the tile to cool down. This practice will help avoid excessive heat buildup and reduce the risk of cracking. 8. Drill gradually: Begin with a smaller bit size and gradually increase to the desired size. This step-by-step approach will help prevent chipping and cracking. 9. Clean the debris: After drilling, remove any debris from the drilled hole. This will ensure that the hole is clear and ready for any further installation, such as anchors or screws. 10. Remove any rough edges: Use sandpaper to smooth any rough edges left from the drilling process. This will give a clean and finished look to the hole. Remember, patience, low drilling speed, and frequent cooling are key to successfully drilling Travertine marble tiles without cracking them.
Drilling Travertine marble tiles requires careful and precise techniques to avoid cracking. Heres a step-by-step guide to help you drill Travertine marble tiles without causing any damage: 1. Choose the right drill bit: Use a diamond-tipped or carbide-tipped drill bit specifically designed for drilling through hard materials like marble. These bits will reduce the risk of cracking. 2. Mark the drilling spot: Measure and mark the exact spot where you want to drill. Use a pencil or masking tape to make the mark. This will help guide your drill and ensure precision. 3. Secure the tile: Place the marble tile on a stable surface, such as a workbench or sawhorses. Use clamps or a vacuum base to firmly hold the tile in place. This will prevent it from moving or vibrating during the drilling process. 4. Prepare for drilling: Fill a squirt bottle or a spray bottle with water. This will be used to keep the drill bit and the marble cool during the drilling process. Marble can heat up quickly, leading to cracks and damages, so keeping it cool is crucial. 5. Start drilling: Begin drilling at a slow speed with light pressure. Apply enough pressure to make contact with the tile but avoid pushing too hard. Let the weight of the drill do most of the work. Drilling at a low speed and with a light touch will help prevent cracks. 6. Maintain cooling: While drilling, intermittently spray water onto the drill bit and the drilling area. This will help keep the temperature down and prevent overheating, which could lead to cracking. 7. Take breaks: Occasionally pause the drilling process to allow the bit and the tile to cool down. This practice will help avoid excessive heat buildup and reduce the risk of cracking. 8. Drill gradually: Begin with a smaller bit size and gradually increase to the desired size. This step-by-step approach will help prevent chipping and cracking. 9. Clean the debris: After drilling, remove any debris from the drilled hole. This will ensure that the hole is clear and ready for any further installation, such as anchors or screws. 10. Remove any rough edges: Use sandpaper to smooth any rough edges left from the drilling process. This will give a clean and finished look to the hole. Remember, patience, low drilling speed, and frequent cooling are key to successfully drilling Travertine marble tiles without cracking them.
show more hide
showmore

How can I install a Travera Marble mosaic for a wall application?

Installing a Travera Marble mosaic for a wall application requires several steps. Here is a general guide to help you through the installation process: 1. Prepare the wall: Ensure that the wall is clean, flat, dry, and structurally sound. Remove any existing paint, wallpaper, or loose material. Repair any cracks or holes and sand down any uneven areas. 2. Measure and plan: Measure the wall area where you want to install the Travera Marble mosaic, and carefully plan the layout of the mosaic. Consider any patterns or designs you wish to create. Its advisable to use a measuring tape, level, and chalk line to mark guidelines on the wall for reference during installation. 3. Gather your materials: In addition to the Travera Marble mosaic tiles, you will need materials such as thinset adhesive, a trowel, spacers, a tile cutter or wet saw (if necessary for cutting tiles), a notched trowel, grout, a grout float, and a sponge. 4. Apply the adhesive: Follow the manufacturers instructions to mix the thinset adhesive. Using a notched trowel, apply an even layer of adhesive on a small section of the wall, following your marked guidelines. Make sure the adhesive is evenly distributed. 5. Install the mosaic tiles: Press the Travera Marble mosaic tiles into the adhesive, working from the bottom up. Use the spacers to ensure even gaps between the tiles. If needed, use a tile cutter or wet saw to cut tiles to fit at the edges or around obstacles. Continue applying adhesive and pressing tiles until the entire area is covered. 6. Allow the adhesive to dry: Refer to the manufacturers instructions for the recommended drying time of the adhesive. Avoid touching or disturbing the tiles during this time. 7. Apply grout: Once the adhesive has dried, remove the spacers and prepare the grout according to the manufacturers instructions. Using a grout float, apply the grout to the gaps between the mosaic tiles, pressing it firmly and ensuring complete coverage. Wipe off the excess grout from the surface of the tiles using a damp sponge. 8. Clean the tiles: After the grout has partially dried, use a clean, damp sponge to remove any remaining grout haze or residue from the tiles. Rinse the sponge frequently to avoid spreading grout. 9. Final touches: Once the grout is completely dry, use a soft cloth to polish the Travera Marble mosaic tiles, restoring their natural shine. Remember to always refer to the specific instructions provided by the manufacturer of the Travera Marble mosaic tiles and the adhesive/grout you are using, as the process may vary slightly depending on the products.
Installing a Travera Marble mosaic for a wall application requires several steps. Here is a general guide to help you through the installation process: 1. Prepare the wall: Ensure that the wall is clean, flat, dry, and structurally sound. Remove any existing paint, wallpaper, or loose material. Repair any cracks or holes and sand down any uneven areas. 2. Measure and plan: Measure the wall area where you want to install the Travera Marble mosaic, and carefully plan the layout of the mosaic. Consider any patterns or designs you wish to create. Its advisable to use a measuring tape, level, and chalk line to mark guidelines on the wall for reference during installation. 3. Gather your materials: In addition to the Travera Marble mosaic tiles, you will need materials such as thinset adhesive, a trowel, spacers, a tile cutter or wet saw (if necessary for cutting tiles), a notched trowel, grout, a grout float, and a sponge. 4. Apply the adhesive: Follow the manufacturers instructions to mix the thinset adhesive. Using a notched trowel, apply an even layer of adhesive on a small section of the wall, following your marked guidelines. Make sure the adhesive is evenly distributed. 5. Install the mosaic tiles: Press the Travera Marble mosaic tiles into the adhesive, working from the bottom up. Use the spacers to ensure even gaps between the tiles. If needed, use a tile cutter or wet saw to cut tiles to fit at the edges or around obstacles. Continue applying adhesive and pressing tiles until the entire area is covered. 6. Allow the adhesive to dry: Refer to the manufacturers instructions for the recommended drying time of the adhesive. Avoid touching or disturbing the tiles during this time. 7. Apply grout: Once the adhesive has dried, remove the spacers and prepare the grout according to the manufacturers instructions. Using a grout float, apply the grout to the gaps between the mosaic tiles, pressing it firmly and ensuring complete coverage. Wipe off the excess grout from the surface of the tiles using a damp sponge. 8. Clean the tiles: After the grout has partially dried, use a clean, damp sponge to remove any remaining grout haze or residue from the tiles. Rinse the sponge frequently to avoid spreading grout. 9. Final touches: Once the grout is completely dry, use a soft cloth to polish the Travera Marble mosaic tiles, restoring their natural shine. Remember to always refer to the specific instructions provided by the manufacturer of the Travera Marble mosaic tiles and the adhesive/grout you are using, as the process may vary slightly depending on the products.
show more hide
showmore

Can Travera Marble mosaic be used for a high-traffic area floor?

Yes, Travera Marble mosaic can be used for a high-traffic area floor. Marble is a durable natural stone that is known for its strength and longevity. However, it is important to properly seal and maintain the marble to ensure its durability in high-traffic areas. Regular cleaning and resealing will help protect the marble from scratches and stains. Additionally, using appropriate floor mats and furniture pads can further protect the marble surface.
Yes, Travera Marble mosaic can be used for a high-traffic area floor. Marble is a durable natural stone that is known for its strength and longevity. However, it is important to properly seal and maintain the marble to ensure its durability in high-traffic areas. Regular cleaning and resealing will help protect the marble from scratches and stains. Additionally, using appropriate floor mats and furniture pads can further protect the marble surface.
show more hide
showmore

Do I need special adhesive for Travera Marble wall tiles?

Yes, it is recommended to use a specialized adhesive for Travertine marble wall tiles. Regular adhesives may not provide sufficient bonding strength and durability for this type of natural stone. It is best to consult with the manufacturer or supplier of the Travertine marble tiles to determine the specific adhesive that is recommended for installation.
Yes, it is recommended to use a specialized adhesive for Travertine marble wall tiles. Regular adhesives may not provide sufficient bonding strength and durability for this type of natural stone. It is best to consult with the manufacturer or supplier of the Travertine marble tiles to determine the specific adhesive that is recommended for installation.
show more hide
showmore

How can I cut Travera Marble tiles without cracking?

To cut Travera Marble tiles without cracking, follow these steps: 1. Choose the right tools: Use a wet saw with a diamond blade specifically designed for cutting marble. The wet saw helps to keep the blade and the tile cool, preventing heat-related cracks. 2. Mark your cut: Measure and mark the desired cutting line on the surface of the marble tile using a pencil or a marker. Double-check your measurements before making the cut. 3. Set up the wet saw: Fill the reservoir of the wet saw with water, ensuring it stays at the appropriate level during the cutting process. Adjust the cutting depth and angle of the blade as needed. 4. Secure the tile: Place the Travera Marble tile on the wet saws cutting table. Adjust the guides to hold the tile securely in place, ensuring it wont move during the cutting process. 5. Cut slowly and steadily: Start the wet saw and slowly push the tile into the blade following the marked cutting line. Apply even pressure but avoid pushing too hard. Let the blade do the work to prevent cracking. 6. Use continuous water flow: Keep the water flowing from the wet saw onto the cutting area throughout the process. This helps to keep the blade and the tile cool, reducing the risk of cracking. 7. Use light pressure at the end: When nearing the end of the cut, reduce the downward pressure on the tile slightly. This will help to prevent any sudden cracks as you complete the cut. 8. Support the cut: Once the cutting is complete, support the cut-off portion of the tile to prevent it from falling freely and potentially cracking. 9. Smooth the edges: After cutting, use sandpaper or a diamond polishing pad to smooth any rough or sharp edges on the cut marble tile. Remember to wear appropriate safety gear, such as safety glasses and gloves, when cutting marble tiles. Take your time and be patient during the cutting process to achieve clean, precise cuts without cracking the Travera Marble tiles.
To cut Travera Marble tiles without cracking, follow these steps: 1. Choose the right tools: Use a wet saw with a diamond blade specifically designed for cutting marble. The wet saw helps to keep the blade and the tile cool, preventing heat-related cracks. 2. Mark your cut: Measure and mark the desired cutting line on the surface of the marble tile using a pencil or a marker. Double-check your measurements before making the cut. 3. Set up the wet saw: Fill the reservoir of the wet saw with water, ensuring it stays at the appropriate level during the cutting process. Adjust the cutting depth and angle of the blade as needed. 4. Secure the tile: Place the Travera Marble tile on the wet saws cutting table. Adjust the guides to hold the tile securely in place, ensuring it wont move during the cutting process. 5. Cut slowly and steadily: Start the wet saw and slowly push the tile into the blade following the marked cutting line. Apply even pressure but avoid pushing too hard. Let the blade do the work to prevent cracking. 6. Use continuous water flow: Keep the water flowing from the wet saw onto the cutting area throughout the process. This helps to keep the blade and the tile cool, reducing the risk of cracking. 7. Use light pressure at the end: When nearing the end of the cut, reduce the downward pressure on the tile slightly. This will help to prevent any sudden cracks as you complete the cut. 8. Support the cut: Once the cutting is complete, support the cut-off portion of the tile to prevent it from falling freely and potentially cracking. 9. Smooth the edges: After cutting, use sandpaper or a diamond polishing pad to smooth any rough or sharp edges on the cut marble tile. Remember to wear appropriate safety gear, such as safety glasses and gloves, when cutting marble tiles. Take your time and be patient during the cutting process to achieve clean, precise cuts without cracking the Travera Marble tiles.
show more hide
show all
Product & Prices
More
Post Your Request
*From:
*Request:

The request includes: 1. surface finished, size 2. quantity required

Send

Question:
*Your rating?
*Content:
Attach files Attach files icon-tip
Please upload photos.drawings or specification docs for suppliers to better understand your requests.Maximum 3 Files.and each file 5M max.--Format support:PNG,JPG,JPEG,GIF,BMP,SVG,xls,xlsx,doc,docx, pdf.
*Name:
*Email:
*Country:
bigimg
loading
Tips

Tell Suppliers what you want to buy

Tips

Submitted successfully, thank you!