Artificial Stone Multi Blade Automatic Slab Cutting Line

This machine is mainly used for processing large quantities of standard stone materials. It is the most ideal stone machine tool for cutting block stone and pavement stone with different thickness of saw blade partition plate.
This machine adopts multi-chip stone cutting machine adopts gantry structure and split structure,users only need to choose different structure models flexibly according to their own site conditions, the machine action is controlled by electric control box, high degree of automation, stable overall processing performance, high precision, high efficiency, low energy consumption characteristics,deeply favored by users.

Introduction of Multi Blade Marble Stone Cutting Machine
bridge multi-blade saw is improved and upgraded on the basis of the bridge cutter, adopting PlC to control multiple saw blades cutting at the same time. use up to 7 pieces of 800 diameters saw blades, the table can be rotated by 90 °, which saves the cutting process and greatly improves the production efficiency, the heavy-duty cross beam and the larger horsepower motors make the mult-slice cutting more comfortable, it very suitable for cutting paving stone, kerbstone, and cut-to-size granite and marble cutting.

The Advantages of Multi Blade Marble Stone Cutting Machine
Advantages of Multi Blade Stone Cutting Machine:
Wide range of use: Multi Blade Stone Cutting Machine can cut marble, granite, rock, limestone and other types of stone
High cutting efficiency: 7 saw blades can be hung at the same time to reduce the number of cuts and improve work efficiency
High yield rate: simultaneous cutting can effectively reduce cutting errors and ensure cutting accuracy.
Reduce labor costs: the same workload, shorten cutting time, improve work efficiency, and reduce labor wages
Easy to learn: Quick to use the machine, simple operating steps, easy to learn

Compare Multi Blade Stone Cutting Machine with infrared stone cutter

Multi Blade Stone Cutting Machines and infrared stone cutters are commonly used in cutting equipment
Multi Blade Stone Cutting Machine
Multi Blade Stone Cutting Machine refers to a cutting machine that is composed of multiple saw blades. It can achieve up to seven 800mm saw blades for simultaneous cutting. Compared with the infrared stone cutter, it has higher cutting efficiency, deeper cutting depth, high cutting accuracy and high cutting efficiency. Fast speed and wide application range.

infrared stone cutter
The infrared stone cutter uses infrared technology to quickly and accurately cut various stone materials, such as granite, marble, slate, ceramic tiles, etc. The infrared bridge edge trimmer has a high-precision cutting effect and can achieve fine cutting to ensure the quality and aesthetics of the product. The cutting accuracy is relatively low and the cutting speed is also slow.

Thin Veneer saw at Block Mountain Stone
The mighty stone saw (30 horse and 60 horse power) model is compact, portable, and lighter - making the task of hauling much easier. This model comes with a smaller and faster 30 in. Blade for quicker cutting of your everyday stones. Effectively changing the stone cutting industry,this mighty stone saw has been designed to be safe, sturdy and simply low maintenance. Every aspect-from components to assembly-was designed to fit all the below criteria and do it at a reasonable price.

This machine uses PLC system and Human-machine Interface, combined with Ultra-high precision rotary encoder to slice, uses inverter to control left-right feeding, adjusts speed according to the stone material. It uses hydraulic lifting system, combination of Chrome-plated guide pin and wear guide bush,with small gap,wearable, beautiful structure, and Guide Sleeve with multi-layer seals, with waterproof,dustproof, anti-spill,improving the service life. Forward-backward slicing uses high-precision screw nut driving, automatic slicing, main spare parts adopt imported good-quality materials; the block can be placed on the ground directly to economize the worktable and its maintenance costs; thus the whole machine is featured with high cutting efficiency, high slicing precision, flatness of plate after cutting, high stability, easy-operating to suit granite and marble block with high value.

Bestlink Right angle (section) machine
The machine is a monolithic structure with compact structure and convenient installation and transportation.
The main control components are all international brand components, and the cutting main motor and cutting conveyor belt are all stepless speed regulation.
The working mode of the machine adopts the continuous cutting mode of the pipeline , which is mainly usedfor cutting the plane of irregular elliptical stones such as goose warm stone.

SLAB TRIMMING MACHINE HAS 7 HEADS AND FULL AUTOMATIC WITH LASER SELECTION. IT USES SERVO MOTOR FOR DECENT CUT.

SX-3 is an innovative numerical control multi-spindle cutting centre with three cutting units with interpolated axes, designed and patented by Donatoni Macchine to satisfy those needing a compact system for large-scale production line of marble, granite and agglomerate flooring and wall coverings of various types with different sizes and thickness.
Donatoni Macchine were the first to introduce a multi-spindle machine with patented rotating bridge to the market and, rich in the experience they have built up over the years, they can guarantee their customers a very high level of productivity and at the same time complete optimisation of the slabs.

MULTIBRETON TC-TD - AUTOMATIC CUTTING LINE WITH SOFTWARE OPTIMISATION

For plunge-cutting granite and marble slabs, the line consists of two machines positioned in sequence, the MULTIBRETON TC longitudinal saw and the MULTIBRETON TD cross-cutting saw, which work simultaneously thus guaranteeing high productions.

Depending on production requirements, it is possible to vary the number of cutting spindles. The working cycle is fully automated and can be programmed from the control panel which is provided with colour “touch-screen” monitor and technologically advanced software featuring a user-friendly interface. Upon request this cutting line can be supplied with a software option for optimising cutting operations.

MULTI-BLADE LONGITUDINAL SAW

The MULTIBRETON TC cuts the slab which travels on the conveyor belt mounted on side guides. This system ensures the perfect parallelism of each single cut.

CROSS-CUTTING SAW

The MULTIBRETON TD cuts the slab as the spindle holding beam advances at a right-angle to the conveyor belt. The beam travels at a perfect right angle on guides enclosed in an oil bath and protected by a labyrinth seal casing.

Beam motion is controlled by an inverter-controlled motor and two trapezoidal screw synchronised by a shaft. A pusher/aligner for squaring up the strips before cutting is installed at the front end of the machine. This system guarantees the perfect geometry of right-angled workpieces.

MULTIBRETON ACS-ADS - AUTOMATIC CUTTING LINE WITH SOFTWARE OPTIMISATION FOR THICK SLABS

The ideal cutting line to achieve a high production capacity when plunge-cutting granite and marble thick slabs (6 cm granite - 8 cm marble). This line consists of two cutting machines positioned in sequence, our Multibreton ACS longitudinal saw and our Multibreton ADS cross-cutting saw, which simultaneously cut different slabs guaranteeing a high production capacity.

Depending on the size of the slab to cut and production requirements, it is possible to vary the number of cutting spindles fitted on both cutters. The cutting line production cycle can be programmed and completely automatic.

The machines are equipped with control panels provided with colour “touch-screen” monitors and technologically advanced software featuring a fast and intuitive operator-machine interface. Upon request this cutting line can be supplied with a software option for optimising cutting operations.

MULTI-BLADE LONGITUDINAL SAW

The Multibreton ACS cuts the slab which travels on the conveyor belt mounted on side guides, whereas the cutting spindles rigidly locked to the beam remain in a fixed position.

This cutting system ensures an almost perfect parallelism of the single cuts, a machining necessity when cutting rightangled workpieces.

CROSS-CUTTING SAW

The Multibreton ADS cuts the slab as the spindle holding beam advances at a right-angle to the conveyor belt. The beam travels at a perfect right angle on guides enclosed in an oil bath and protected by a labyrinth seal casing.

Beam motion is controlled by a variable speed motor and two ball screw assemblies coupled to ball nuts mounted to the two supporting frames of the beam. A shaft coupled to the angle reduction units ensures the ball screw assemblies are synchronised.

A mobile aligner for squaring up the strips before cutting is installed at the front end of the machine opposite the spindle-holding beam.

The aligner travels on roller bearings and is driven by pneumatic cylinders and two rack-pinion couplings which ensure synchronised movement. This system guarantees an almost perfect geometry of right-angled workpieces.

SX-5 is an innovative numerical control multi-spindle cutting centre with five cutting units with interpolated axes, designed and patented by Donatoni Macchine to satisfy those needing a compact system for large-scale production line of marble, granite and agglomerate flooring and wall coverings of various types with different sizes and thickness.
Donatoni Macchine were the first to introduce a multi-spindle machine with patented rotating bridge to the market and, rich in the experience they have built up over the years, they can guarantee their customers a very high level of productivity and at the same time complete optimisation of the slabs.

Infrared bridge cutting machine with 4-column adopts PLC control and automatic positioning techniques for various moves of the cutter frame & linear rolling guide driving,magnetic ruling,laser device setting.It is consists of high quality steel.The platform can be 360degree rotatable and automatically trun slate up.It can cut sizeable slabs with high precision and efficiency.
Technical parameters:
1•max.blade of diameter φ400-700mm
2•max.stroke for transverse 3600mm
3•max.stroke for longitudinal 3300mm
4.elevation stoke for main shaft of blade 430mm
5•max.titling degree for work-bench 87°
6•max.rotation degree for work-bench 360°
7.location degree for work-bench 0°- 45°- 90°
8•power of main motor 18.5kw
9•total power of machine 23.5kw
10•water consumption 2m3/h
11.water pressure >0.2 Mpa
12.overall size for machine 4800×5816×2350mm
13•total weight for machine 5800kg
This machine is composed of bridge stank, upper transmission unit,left and right moving mechanism, vertical arm, left and right side beam, block delivery trolley truck, and so on. The brief introduction to them as follows.The bridge stand is composed of bridge stand, sliding plates, spanning rack, fixing bush andhorizontal cutting, and so on. The cast bridge stand is supported by the rolling rail at the bottom end against right and left side beams. At its top, there is twin—V guides rail to act with sliding plate, guard is fitted over the guide rail to prevent dust intruding. The spanning rack is coupled with sliding plate, horizontal cutting tool is fitted at one side face of the spanning rack whose top is fitted with back bars reduction mechanism;gear;rank and bevel gear reducer;longitudinal moving motor. Vertical cutting tool is fitted at the bottom of bridge stand. When the machine cuts the blocks with vertical blade, the motor of vertical-cutting drives the blade to rotate through belt transmission and the slide plate moves longitudinally under the action of longitudinal moving motor through meshing between gear and rank. When the vertical cutting is completed and horizontal cutting begins, horizontal cutting blade carries on longitudinal lateral cutting which cuts off the plate and finishes the whole cutting operation. The height of horizontal blade could be adjusted by worm-wheel reduction box.The upper transmission part: This part consists of reducer motor, transmission shaft,connecting sleeve, bracket and bevel gear. When bridge stand elevates, the motion of motor for elevating is output from reducer motor through transmission shaft and bevel gear to lead screw which drives bridge stand to elevate.Left and right movement part: This part is composed of reducing gear, gear, spindle and splitwheel. When bridge stand moves, the motion of motor is transmitted to main gear which is engaged with the rack at the top of side beam and drives bridge frame to move to the right and the left. The amount of movement can be controlled by control panel.The vertical arms part: This part consists of four groups of vertical arms, two pieces at eachside and all are jointed with upper beam, left and right screw nut seat moves along the guide rails of vertical arm up and down, which makes bridge stand elevate.Left and right side beam part: This part is consist of left and right side beam, rack, slidingberth and screw nut seat. The left and right side beams are jointed with vertical arm by screw nut seat. At their top, there are rack and sliding berth assembly which is used to support bridge stand. The engagement space between rack and gear could be adjusted by reducer motor and bearing seat.Block delivery trolley truck part: It consists of reducing box, axle, chassis and track wheel,and so on. The truck is driven by independent motor. The chassis is made from profile steel and steel plate by means of welding. The motion of motor is reduced by reduction box and drives the wheel to rotate along guide rail, which carries out block conveying.