Granite Block Cutting Machine

RSM 20 ELECTRICALLY RAMPED DIAMOND WIRED BLOCK CUTTING MACHINE

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 24 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

RSM 20 ELECTRICALLY RAMPED DIAMOND WIRED BLOCK CUTTING MACHINE : The diamond wire cuts the block marble by a rolling pulley. When the machine starts, engine moves the motor shaft and it turns the pulley. The engine is fixed on a car and motor shaft is due to pulley. The chassis of the machine is ramped to resolve the gap creating while the diamond wire is cutting. Before cutting, the car is removed to the top of the inclined plane by a drum rope and ratchet mechanism. During cutting the car slid

GP 800 - Marmo - Block Cutters

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Travertine

Multi Wire Saw Marble Block Cutting Machine N6870/60-62

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Characteristic Specs NO MAXIMUM OF THREADS 60-62 MAXIMUM MACHINE HEIGHT 7.65 meters MACHINE LENGTH 11.40 meters MAXIMUM BLOCK LENGTH 3500mm MAXIMUM BLOCK HEIGHT 2200mm THREAD LENGTH 23.50m MACHINE VERTICAL TRAVEL 2400mm FLYWHEEL DIAMETER 1800mm WIDTH OF CUT 1600mm MINIMUM CUTTING THICKNESS 21mm DIAMOND WIRE SPEED 0-40m/sec DIAMOND WIRE DIAMETER 6.3-5.3mm MAIN MOTOR POWER 355kw

Dia. 5,3 Wire Multiwire Jupiter GS220 -MultiWire Saw Machine for Marble Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

MULTIWIRE JUPITER GS220 is an open frame multiwire machine for the production of marble slabs that performs blocks fast cutting through a set of diamond wires. It is available in several versions which differ for the maximum number of wires and for the diamond wire diameter (7,3 mm - 6,3 mm- 5,3 mm- 4,3mm).

Granite Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

MAIN MOTOR : 50 HP, 960 RPM (Hindustan, Crompton, Siemans) BEAM LENGTH : 22 FEET TRAVELLING MOTOR : 5 HP DC/AC UP / DOWN MOTOR : 5 HP CONTROL PANEL WITH LOOM : PANEL TO MACHINE V-RAIL LINE {12 feet x 2 nos.} : 24 FEET FOUNDATION BOLTS : 12 NOS. {With nut & washer} LOADING TROLLEY (9’x5’) : 2 NOS. { Manual} Channel 8” MASTER TROLLEY (9’x5’) : 1 NOS. {Motorized) Channel 8” TRANSFER TROLLEY (9’x5’) : 1 NOS.

CNC Diamond Beading Wire Saw DTSJ-1500/1800/2200

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 6 Months

Usage: Granite, Marble

Machinery Function Features:

CNC Wire Saw adopts CNC control, four axis linkage ,can processing different specifications of the circular plate, solid and hollow stone column, Roman column, large solid line, Numbers, letters, Chinese characters and a variety of complex shapes for marble, granite. The machine process stone with high machining precision and good quality.

Small Stone Block Cutting Machine (70-120) Cm

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Arm Block Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Sandstone, Travertine

Machinery Function Features:

Used for cutting relatively small stone blocks and its available with different motor power, rail and table size to meet the customer requirements.

SCHIND BIG BRO 3520 Vertical And Horizontal Bridge Cutting Machine For Small Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Vertical-Horizontal Block Cutting Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

SCHIND Big Bro 3520 which is designed to process with small blocks and thick stones or to size more marble and granite slabs in one time. The operator has the opportunity to cut both vertically and horizontally at different angles by this new model.

ORTOBRETON 4EM Four column block saw for marble

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

​ORTOBRETON 4EM - RUGGED, EFFICIENT AND PRECISE Machine featuring greater working dimensions for blades with maximum diameter of 1.700 mm. Its rigid structure, strong construction and well-dimensioned beam limit the vibrations and assure the optimal use of diamond blades. The result is a more precise cut and a longer tool life. RAPID AND PRECISE The movement of both the spindle-holding carriage and the beam are in an oil bath, always precise, rapid and well protected. Once the beam has reached t

MEGALODON Multi Wire Gangsaw Machine for Block Cutting

€185,000 - €206,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

TOKSEL MULTIWIRE BLOCK-CUTTING MACHINE: MEGALODON Megalodon which offers various wire thickness options, is first launched with 5.3mm. wires in İstanbul Marbletech fair. Thin wires provide high cutting speed and less waste of raw materials. The precision cut feature of the machine transforms raw stones in the quarries into high value added products. With hot-dip-galvanizing and epoxy paint MEGALODON is firm in any condition. It has TOKSEL’s traditional all-over-auto lube system as well. Compared

Socomac- MONOLINA CNC Diamond Wire Saw Profiling Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

The machine is designed to cut decorative profiles from stone blocks. It is equipped with 2 flywheels with a diameter of 2,350 mm and 2 pairs of small flywheels with a diameter of 400 mm to guide the rope in any direction. Small flywheels are mounted on movable arms to reduce the distance between them and the material and increase the precision of the cut. The flywheel motor is equipped with an inverter to adjust the circumferential speed of the rope.

Grani Roc COMBO Single Wire Cutting for dressing stone blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The COMBO equipment from Grani Roc is especially designed to dress the blocks before they go for slabbing in a multiwire saw machine. It is composed of an stationary wire saw, a mobile wire saw and a mobile trolley, allowing to perform two cuts simultaneously. ·The structures and pillars of the machines are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process. · All the steel element

AOSM 25 ELECTRICALLY ANGLED AUTOMATIC SIZING MACHINE

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 24 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

AOSM 25 ELECTRICALLY ANGLED AUTOMATIC SIZING MACHINE : The diamond wire cuts the block marble by a rolling pulley. When the machine starts, engine moves the motor shaft and it turns the pulley. The gap creating while cutting on the diamond wire resolved by automatic walking engine, so that the cutting process occurs. Water is sending to the cutting zone by hoses controlled with valves. The water protects the cutting equipment from warming up and takes the marble dust away.

Ucler 4 Post St 1750 Marble Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

OZKM80 80-Blades Gangsaw Block Cutting Machine, Multi Blade Gang Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Özteknik Makine manufactures OZKM80 gang-saw, equipped with maximum 80 diamond blades, to transform a stone block to many slabs simultaneously and efficiently. Özteknik Makine’s OZKM80 gang-saws employ components that are carefully designed to transfer the movement to the blade rack, flywheel and the connecting rods. The 3.5 meter flywheel is of cast iron, and guarantees a constant cutting speed. Flywheel drive shaft, produced from steel, and two cast iron supports and two spherical roller beari

TSC2100 M Diamond Wire Saw Machine - Single Wire Block Squaring Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Mobile structure single diamond wire saw machine for vertical cutting. Diamond wire saw machine for Vertical sawing. Moving on rails to program several blocks. Runway from 39.37’ to 78.74’. Autonomous machine: possibility to lay out several sawing blocks. The machine can be installed outside. https://www.thibaut.fr/en/machine-tsc2100-m-diamond-wire-saws-monument-building-landscaping/

Twix Roller Wire Saw Machine for Chipping Blocks-Block Squaring Machine, Block Dressing

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Ref.: 98 Twix Roller for chipping the blocks with the diamond wire. The machine has two adjustable mobile parts to enable cutting the block into different sizes in one go. It can be programmed to cut several measurements in the same block or in various sequenced rows of blocks. Data management and storage.

Circular Blocksaw TB 1600 CNC Bridge Type Block Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Circular Blocksaw for Blades up to 2200 mm The heavy bridge saw of the TB 1600 series with blade diameters up to 2200 mm is the optimal machine for sawing medium-sized blocks. It combines a sophisticated design with an intelligent control system. This very powerful saw is characterized by a high degree of operational reliability coupled with low tool costs and is the first choice especially in soft stone (limestone, sandstone, etc.).

Monowire Saw Machine for Trimming Blocks-Block Squaring Machine, Block Dressing

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Ref.: 99 Monowire Roller has the function of trimming blocks with diamond wire and cutting slabs of variable thickness. Programmable to cut several measures in the same block or in several blocks in a row placed in line. Data management and memorization.

TSC400 Diamond Wire Saw for cutting complex shapes automatically monuments

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Ideal for cutting complex shapes automatically. Features Diamond wire machine for profiling of flat workpieces. Cutting capacity of all circular shapes from 520 to 3000 mm in diameter. The vertical capacity of the TSC400 is from 20 to 400 mm maximum thickness. The machine is very compact. Mechanically welded frame for perfect rigidity. Roller table rotatable over 360°. Precise cable tension by pneumatic control. For better use, the machine includes a console with a touch screen and a control han

Kodiak 5 Evolution Multiwire machine for Marble Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. The machine installs 5 diamond wires for different thickness slabs from 2 to 70 cm, it can contains up to 15 diamond wires only for slabs of 2 cm. The machine is exclusively constructed on 2 columns and can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent tension

Thibaut TSH2200 Diamond Horizontal Wire Saw Machine for Block Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

A revolutionary system The TSH1800/TSH2200 is a revolution in primary sawing because it saws the blocks horizontally with an automatic wedging insert system. It is a new concept allowing you to cut upon request without blocks handling up to 16 blocks on 40 m runway. Accuracy and flatness in the cuttings allow saving time and abrasives when flat polishing. The accuracy is +/- 0,5 mm. Minimum handling and maxi safety thanks to flat unloading of the slabs (TSH had an award from the “BERUFGENOSSENSC

T35 SE Giant Blade Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone

Machinery Function Features:

T35 SE Giant Blade Saw: Two strong welded steel columns support and guide vertical movement of bridge of large dimensions made in special cast iron. Structure given added stability/reduced vibration/less resonance thanks to ribs in cast iron. Built in welded steel with giant blade for extra cutting depth, a robust machine built on two columns that support and guide the vertical cutting unit movement along the cast iron bridge. Manual setting of limit switches avoided because of encoder for setti

Hand Stone Cutter

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Arm Block Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone

Machinery Function Features:

The HK-0101/A Block Cutter is fully automatic. We put a block on the table, and we insert the parameter of width of tile to be cut (example: 2 cm), then the machine works automatically, it cuts the block with the specified width then the table moves to cut another tile from the block and so on until the block is finished. We can also work manually with this machine. It has 1 column; we can install a disk of 1300 mm of diameter. The cutting process is controlled with an Inverter. The machine shou

BLOCK CUTTING MACHINE Model HTB

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Large size block cutter which works with one or more vertical disks and a horizontal disk. Its structure sits on four pillars in order to grant the stability and strenght needed to guarantee an accurate cut. It is recommended to complete the block cutter with the automatic discharger in order to make the already cut pieces unloading easier. Different models depending on the amount and the diameter of the vertical disks to be used.

DUOMATIC Multiwire Machine for Block Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine has the classic setup of static structure with moving trolley and has an automatic system for changing the thickness between wires. This system makes the machine being very versatile and time saving in changing the thickness of each cut. ·The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for g

N8000/8500 Series Giant Disc Bridge Type Block Cutters

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble

Machinery Function Features:

NODOSAFER slicers are very solid and precise machines, characterized by their robustness, great production versatility and easy handling. These slicers are equipped with the latest technological advances in terms of their particular mechanical and electronic design. Particularly noteworthy is the linear guide system of the headstock bridge, supported by two longitudinal beams, parallel to the cutting table, with precision linear guides and high-precision, high-rigidity recirculating ball slides,

Pedrini JUPITER GS210 Singlewire for marble, granite and natural stones blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Pedrini single wire and two wire JUPITER GS210 machines perform cuts on marble, granite and natural stones blocks up to 4200 mm long. They can be used both for squaring and for cutting blocks into slabs. It works with a closed circuit diamond wire and it is manufactured in different configurations and with various automation levels to better suit each customer’s needs. SINGLEWIRE JUPITER GS210 is available in two main versions: fixed and self-moving. This last version can be used individually or

Granite Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

MAIN MOTOR : 15 HP, 1440 RPM (Hindustan, Crompton, Siemeans) BEAM LENGTH : 12 FEET TRAVELLING MOTOR : 2 HP DC/AC UP / DOWN MOTOR : 2 HP CONTROL PANEL WITH LOOM : PANEL TO MACHINE V-RAIL LINE {10 feet x 2 nos.} : 20 FEET FOUNDATION BOLTS : 12 NOS. {With nut & washer} LOADING TROLLEY : 2 NOS. { Manual} MASTER TROLLEY : 1 NOS. { Manual} CUTTER GUARD : 1 NOS.

Wire Saw Machine BSS 600 - Single Wire Block Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

Our wire saws enable the fully automatic cutting of blocks of hard or soft stone into slabs from 20 mm thickness. Depending on the customer

Kodiak 20 Evolution Multiwire for Marble,Granite Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. It is made in different size models, in order to install from 20 up to 84 diamond wires. The machine is exclusively constructed on 4 columns, guaranteeing the best stability and cutting precision. The machine can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent t

T30 S Electronic Giant Disc Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone

Machinery Function Features:

T30 S Electronic Giant Disc Saw: Stability of machine in operation guaranteed by a over dimensioned frame in welded steel. On the electrical board it is installed the control panel with Touch Screen to visualize alarms, operator instructions and operational parameters for development of correct workyng cycle to be seen in real time. Cutting unit with rack / pinion system powered for beam travel by electric gear motor that allows cutting speed selection. Bridge translates on bearings with rack /

Pedrini M585 - Multidisc block cutter for granite, lava stone, marble

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

4 columns block cutter for cutting granite, lava stone and marble blocks into strips by means of a set of vertical diamond discs and a horizontal disc. It works on stationary block. M585 is available in several versions according to the vertical discs maximum diameter (from 1300 to 1700 mm) and to the maximum number of vertical discs (34 or 56 discs). It can be equipped with automatic or semi-automatic unloaders. This 4 columns machine cuts stationary block and produces 460/650 max. wide strips

Multi Blade Block / Stone Cutter

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Arm Block Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

DUOMATIC GANTRY Multi Wire Saw Machine for Block Cutting

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Two-Wires Saw Machine of Grani Roc is designed for a high slabbing production from stone blocks. The machine is mobile and has an automatic system for thickness changing. These characteristics make the machine being very versatile and time saving in loading and unloading operations as well as changing the thickness of each cut. In this machine the user can input up to 10 different measurements for the thickness of the slabs and the machine will move automatically the wires and also will adap

Block Cutter Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Travertine

Machinery Function Features:

The HK-0103/A Block Cutter is fully automatic with 4 columns. It can support a block with 25 tons of weight. It cuts the block in vertical and horizontal ways. The table goes out to take the block, and then the table will come back to the center of the machine and remain stable so that the machine starts to work and move to cut the block. We insert the parameter of width of tile to be cut (example: 2 cm) and the height of the tile to be cut, then the machine works automatically. We can also work

MAXI 3000 RX and MAXI 3500 RX - Sawing Machines with Jumbo Disc for Granite and Marble Blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

MAXI 3000 RX and MAXI 3500 RX are sawing machines with a jumbo disc for cutting marble and granite at the desired thickness. These machines follow the Simec philosophy of the NT2 block cutters, with 2 columns fixed to the ground and the mobile block carrying trolley, to guarantee the absence of vibration, high productivity and long diamond lifetime.

Pedrini M586- Giant Disc Block cutter for marble, travertine, slate

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Marble, Limestone, Slate, Sandstone, Travertine

Machinery Function Features:

4 columns block cutter machine for cutting marble, travertine and limestone blocks into strips by means of one or more vertical discs and a horizontal disc. It works on stationary block. M586 is available in several versions according to the vertical disc maximum diameter (from 1300 to 1700 mm), the cutting system and the main motor power. It can be equipped with automatic or semi-automatic unloaders. Pedrini M586 block cutter is the result of the technological evolution deriving from the manufa

Genesis GS141-142 Giant Disc Saw Block cutter for granite, marble

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

GENESIS GS141 and GS142 are machines with programmable automatic cycle that were designed for the sawing of 1800 mm max. high blocks, and that are targeted to the production of large thickness slabs for tombstone art, buildings and paving stones in marble, granite and lava stone. Disc programmed down feed can be performed during the last phase of each cutting stroke. Through such technology the disc reciprocates immediately the cutting sense at the end of each stroke thus creating a “PENDULAR“ m

Squaring Block Machine Mod. SQB /PFE

Type: Stone Factory Machines › Stone Block Cutting Machines › Monolama Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

SQUARING BLOCK MACHINE Mod. SQB /PFE The squaring block machine model SQB/PF is a static machine particularly suitable for fast cutting of blocks in medium soft stone. The peculiarities of this machine are the possibility of making dry cut and the contained dimensions. So it can be easily used even in different places from the usual working area. The cutting chain is 26 mm thick and it is equipped with cutting tools in PCD (polycrystalline diamond) allowing a long and continuous activity of the