Quarry Hydraulic Jacks

It's widely used in coal mining, soft rock, digging pits for post brackets, digging slots, breaking concrete, frozen earth in construction and installation engineering or constructing works in casting industries.
G7 G10 G15 G20
Weight 7.2 kg 10 kg 15 kg 20 kg
Length 456 mm 570 mm 580 mm 485 mm
Cylinder Diameter 35 mm 38 mm 42 mm 40 mm
Stroke 120 mm 155 mm 155 mm 165 mm
Working Pressure 0.4~0.5 MPa 0.5~0.63 MPa 0.5~0.63 MPa 0.63 MPa
Impact Energy 30 J 43 J 55 J 60 J
Impact Frequency 21.6 HZ 16 HZ 16 HZ 16 HZ
Air Consumption 1 m3/min 22 L/s 26 L/s 23 L/s
Air Pipe Diameter 19 mm 16 mm 16 mm 16 mm

1. Gas is safer than explosives. It is not a civil explosive product, and transportation, storage, and use do not require approval.
2. There is no need for cumbersome procedures for the approval of explosives and strict supervision by the public security department.
3. There is no destructive vibration and short wave during the blasting process, the proportion of dust is reduced, and there is little impact on the surrounding environment.
4. It can be used in complex operating environments, such as coal mines and mines.
5. Carbon dioxide gas is easy to purchase, and some devices can be reused.
6. Multiple blasting cylinders can be connected in parallel at the same time, the blasting power is large, and the rocks after blasting are large.

CO2 rock-breaking system is a new type of rock-breaking equipment that can replace explosive blasting. There is no vibration, shock wave, open flame, or harmful gas during the construction of a CO2 rock-breaking system, which is very safe and convenient. And it can be reused, which significantly reduces the construction cost. The emergence of a CO2 rock-breaking system perfectly solves the problem of the prohibition of blasting in mines and rock excavation and the low efficiency of hydraulic breakers! It has been widely used in mining, quarrying, highway construction, construction foundations, tunnel excavation, and other fields.

How does it work:
Carbon dioxide gas blasting uses the principle of volume expansion of high-pressure carbon dioxide gas to break rocks.
01: Use a rock drill to drill a hole with a specified diameter and depth on the object to be blasted.
02: Put the Rilong brand rock blasting system into the hole and connect the line to the detonator.
03: The operator starts the detonator to blast according to the on-site conditions.
04: When the blasting is completed, remove the Rilong brand rock blasting system from the site.
05: Repeat the process until the entire structure is divided into sections, the sizes of which vary according to the operator’s needs and equipment, ready for dismantling and disposal.

Our hydraulic breaker could fit to any brand excavator from 0.5-70 ton
Chisel from 35-210 mm
Unit price with spare parts as below:
1: With plywood box package
2: With standard spare parts
2 chisels
2 oil piping
1 N2 gas bottle
1 tool box
1 N2 pressure gauge
Deliver time: 7-15 days after down payment
Deliver method: By sea or by air based on your request

This machine is used in marble and granite quarry. It is used to push the stone. Hard chrome is applied to on piston. Its very hardened material. H6. 486 hydraulic cylinder hardened and grinding. Hydraulic pump 3 way piston polyhydron made. Oil seal of bronze Teflon is used so that it can be usable for long life.
Description
Machine is equipped with 2 HP.AC. Motor
Hydraulic jack pushing capacity is 6 Inches & Whatever is your need.
Hydraulic jack and power pack capacity 300 tons.

A pair of hydraulic cylinders for bench tipping. The unit composed of:Oleodynamic device equipped with a two stages pump for use 700 atm. That can be powered either by tree phase 3 HP electric motor 220/380 Volts with reversing (Tiatano/E Model) or by compustion engine 5 HP and automatic adjuster (Titano/SC model) or by pneumatic motor 3.5 HP(Titani/PN). The unit is composed of: two jacks manufactured in specially treated stell whit chromed cylinder and complete with quick couplings, safety valves and limit switch; each jack ton pushing capacity.

Description：hydraulic jack machine is specially designed according to the characteristics of stone quarrying.
Mainly used for moving, overturning large size rocks.
It is indispensable and widely used for quarrying
Product features:
Hydraulic jack machine is specially designed according to the characteristics of stone quarrying.
Mainly used for moving, overturning large size rocks.
It is indispensable and widely used for quarrying