Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from S
Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically. Features: High rigidity, ensuring long-term stability and efficient operation; Friendly man-machine interface, easy to operate and maintain; PLC integrated control, realizing no dead angle cutting; The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high eficiency .
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high efficiency .
Chain saws machines, Stationary machines for laboratory / sawmill Chain saw machine The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna. The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts. Arms and chains a
The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut. The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
GD-CS2500, GD-CS3200, GD-CS4000,GD-CS6000, GD-CS7500 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can transla
GD-CS3200-XD marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-YT marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-LY marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
LD-CS2500-P marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining require
Crawler-type chain saw is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
Mobile Single Wire Saw with Crawler harmonizes the advantages of a stationary machine with a mobile quarry machine. It is composed of a single wire structure installed on a track chassis and is equipped with a diesel engine, which can be easily configured for transport from quarry to quarry on trailer. Equipped with 4 hydraulic stabilizers, the cutting arch is rotated and brought to the desired height, thus aligning the wire to the face of the block to be cut. The arch structure slides verticall
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels Installed power: 60 kW Weight: 30,000 Kg Electrical power supply: 400V/50 Hz Cutting depth: 3.0 m (XXL) Tunnel height: 5.15-5.62 m max GU70RXC Sawmill Machine for Tunnels Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunne
Terna FANTINI Block Sawing Machine The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank. As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works
70BU-C Block Sawing Machine Chain Saw Model 70BU-C is a self-propelled crawler for vertical cutting, and can be fitted with arms that can cut up to 4.0 metres deep. The machine is fitted with a unique self-propelled track with hydraulic stabiliser feet. It can autonomously move into different areas of a quarry to make cuts into floors or square off blocks, without the need for water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
TECHNICAL SPECIFICATIONS Model ST 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Cutting width 42 mm Useful cutting depth 4,20 mt (max) Rotation of cutting jib 360° Weight 5.100 kg. This model is designed for open top quarries.
The 70RABU chain saw machine features a cutting capacity of up to 5.1 m and is even suitable for use with marble and other very hard stones. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor, and can execute horizontal and vertical cuts without the need for water cooling. The main feature of this machine is the single rail that allows it to be repositioned longitudinally rapidly and without the need for lifting equipment. Technical Specifi
The 70 SUPER /H chain saw machine is the most powerful model in the FANTINI range. It features a vertical cutting capacity of up to 8.0 m and provides excellent results with both marble and other types of hard stone. The machine is operated by a hydraulic system with variable capacity main pump driven by an electric motor. The electro-hydraulically operated controls guarantee power and speed in all operating conditions and the machine can execute horizontal and vertical cuts without the need for
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
CARATTERISTICHE TECNICHE TECHNICAL SPECIFICATION Model HSTK 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Operation speed 0 - 44 cm/min Cutting width 42 mm Useful cutting depth 2,75 mt (max) Rotation of cutting jib 360° Weight of the machine 6.900 kg Weight of the hydraulic device 1.450 kg This model is designed for underground quarries, the max cutting height is 4.500 mm.
The Fantini 50.81 chain saw machine is designed for use in medium hardness stone quarries and can execute cuts to a depth of up to di 3.4 m. In the case of hard type marble and stone, the cutting depth is reduced to 2.8 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (RA/P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the
The 70RATA sawing machine can cut up to 5.10 m and can even be used for marble and high hardness stones. Thanks to the presence of PLC and Encoders, its main feature is the ability to perform vertical and horizontal cuts in unattended mode, by setting the cutting measurements (depth and length) before execution. The machine is driven by a hydraulic device with the main, variable flow rate pump driven by an electric motor, and performs horizontal and vertical cutting without the need for cooling
The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P), or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for lif
Chain Saw Model 70.RA/PD can make cuts of up to 5.1 metres, and was designed and built to make vertical and horizontal cuts on hard and/or abrasive stones without the need for cooling water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for any electrical wiring connections to generators or power grids. This model is particularly useful in working environments that are not connected to the power grid. Technical Specifications Instal
Chain Saw Model GU50-SC is a compact version for tunnel extraction work. By setting the cutting depth in automatic mode the machine makes vertical and horizontal cuts against the tunnel face. It is self-propelled on a track and radio-controlled, and hence completely autonomous in its movements. Only one operator is sufficient to operate the machine. This model can run cuts up to 1.7 metres in depth. Technical Specifications Total installed power: 45 KW Overall weight: 14,000 Kg Hydraulic tank ca
SQB/P Sectioning Sawing Machine The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks with a horizontal arm capable of vertical cuts for the squaring off and blocking of hard and/or abrasive stones. The cuts are programmable by means of a computerised system loaded with positioning and cutting parameters. Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without re
The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks, and a horizontal arm that can make vertical cuts for squaring off and blocking hard and/or abrasive stones. The cuts can be programmed by means of a computerised system loaded with positioning and cutting parameters. Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without the need for interventions by an oper
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Quartzite
Machinery Function Features:
UNDERGROUND MACHINE Mod. SV-C 50 Special chain saw machine for back cut of blocks in the underground quarry. Total power 30 KW Hidrostatic transmission with variable speed pump Weight Kg. 8.000 Useful cut up to 1.60 mt (on the right side as well as on the left side) Hydraulic oil tank capacity Lt. 150 Chain rotation speed from 0,1 to 0,7 mt./sec. Arm cutting speed rate up to 15 cm/min. Grease capacity up to 500gr/h Noise level rate: 85 decibel Max speed on tracks 1,5 km/h Chain saw dimensions: L
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high efficiency .
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Electric diamond belt sawing machine, designed to make tunnel cuts, vertical and horizontal. The JET BELT 940 is composed of two columns with two telescopic extensions for the machine fixing, connected with an horizontal beam of 462 cm that bears the electric cutting unit. This is composed of the main motor and the cutting arm with the diamond belt installed. The column bases are motorized for an easy positioning of the whole structure. The cutting tool consists of aspecial plastic belt with sin
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Quartzite Limestone Chain Saw Machine.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
China
Italy
Greece
Turkey
6YR
