Basalt Sandstone

Infrared Automatic Stone Splitter

$5,000 - $10,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Infrared automatic stone splitter has an automatic conveying mechanism, which is suitable for processing the feldspar strips that need to be continuously fed into square stones after sawing.The thickness of the splitting is controlled by an infrared sensor, and the adjustment is convenient and efficient.

Hydraulic Splitting Machine–50T

$5,000 - $6,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The hydraulic splitting machine is used to split cube stones, kerbstones, wall stones and any kinds of stones.This is an automatic splitting machine specially designed for cubes and strips with small size.Work on granite and marble.

30HP 60HP Thin Stone Veneer Saw Strip Cutting Machine

$12,000 - $14,400

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Our patented veneer saws make cutting thinstone veneer flats and 90-degree corners quick, simple, and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16” high and 2.5” thick.

Hydraulic Splitting Machine–60T

$8,300 - $8,800

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Hydraulic Splitting Machine-60T This machine is used to split the large size block to the small pieces. By using the hydraulic system, it splits the stone in a moment overpass the upper and down. The hydraulic splitting machine is used to split cube stones, kerbstones, wall stones and any kinds of stones. Work on granite and marble.

Decorative Stone Breaking Machine-R180

$4,000 - $5,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Decorative Stone Breaking Machine-R180 It is an electric operation machine used for processing of rusticating tiles for cladding or internal/external decoration. This machine is useful to the industry for the recovery of material. It works on granite, marble, travertine and slates, etc. The R180 has robust structure and ease of use.

BENE 28Ton Forklift Loader 28Ton Quarry Wheel Loader With Forks

$68,000 - $80,000

Type: Stone Quarry Machines › Quarry Heavy Equipments › Wheel Forklift Loaders

Warranty: 18 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The loader with double rocker arm connecting rod can lift materials up to more than 28 T. Powerful turbocharged thgine with 6-cylinder 4-stroke for excellent performance and high torque reserve is low-oil consumption. Beautiful streamlined appearance .Pressurized cabin with optional air conditioning and heating system provides comfortable operation environment . Four-wheel ,dual-line and pliers disc brake system ensures safer and more reliable operation. Double-turbo hydraulic torque conver

Bucket Tooth Pin Lock V29PN,V33PN,V43PN,V51PN,V59PN,V61PN,V69PN

$2 - $10

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

5.Hitachi pin lock & rubber :18-20PN,18LK,22PN,22LK,25-30PN,25-30LK,35PN ,205-70-74281,35-40LK,205-70-74291,40PN,35-40LK,45PN,45LK,50PN,50LK,55PN,55LK,56PN,56LK,66PN,66LK,76PN,76LK,86PN,86LK,4K0043,4K0041.V13-V17PN,V19-V23PN,V29PN,V33PN,V39PN,V43PN,V51PN,V59PN,V61PN,V69PN,V71PN,V81PN,21LKS,27LKS,37LKS,47LKS,57LKS Minimum Order Quantity: 500 PCS HRC:38°-42° Material:40Cr Place of Origin: Ningbo,China Certification: ISO9001:2008 Packaging Details: Carton box + Wooden case Delivery Time: 25-30 days

WIND STAR stone splitting machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Basalt, Quartzite, Sandstone

Machinery Function Features:

Wind Star is the Steinex range of splitting machinery used in automatic splitting lines for splitting sawn stone and concrete. In addition to the traditional upper and lower blades, Wind Star splitting machines are equipped with lateral or side blades. This four-blade system permits splitting pressure to be exerted to all four principal stone faces resulting in a straighter split or profile With certain types of stone, using this technology it is possible to produce very thin cladding and tiles

Hydraulic Pressing Machine-HC30

$3,500 - $4,500

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Hydraulic Pressing Machine-HC30 The machine is for cutting marble and granite pieces at different shapes. It splits stone pieces with alloy moulds, driven by hydraulic pistons. At least, 40 different moulds. The moulds can be custom-made. Reuse the leftover and slabs.

HM-2 Cross cutting machine with double blade and controlled positioning

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The HM-2 cross cutting machine combines the possibility of cutting with two units with the positioning precision of the mobile spindle, employing advanced technologies when cutting strips of marble and granite. It finds its application in consecutive cuts of different sizes and is ideal for recovering waste material.

Thin Stone Veneer Saw – Veneer 280

$12,000 - $12,500

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The veneer saw cuts thin stone veneer fats and 90 degrees corners. It cuts stone with irregular shapes and variable dimensions. While maintaining its natural shape, the cut stone presents an even surface, making it easy to place on any surface.It uses vertical blades and an automatical controlled conveyor to accurately cut fat and corner pieces to uniform sizes.Cut types: Flats + Corners.Up to 380mm high and 60mm thick.Material: Sandstone. Brick. Limestone. Other stone. Operating the is easy. Si

Cross Cutting Machine Band ESINTI-650

Type: Stone Factory Machines › Stone Tile Cutting Machines › Multi-Blade Cross-Cutter,Trimming

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS Çalışma Genişliği / Working Width 680 mm Çalışma Kalınlığı / Working Thickness 75 mm Bant Motor Gücü / Band Engine Power 2 hp Testere Motoru / Saw Engine 15 kw 3000 dev/dak (Rpm) Testere Çapı / Saw Diameter 450 mm Kesim Hareket Motoru Gücü / Cutting Movement Engine Power 2 hp Toplam Güç Tüketimi / Total Electricity Consumption 6,25 kw Ebatlar / Dimensions 190 x 190 x 480 cm Ağırlık / Weight 1500 kg Kontrol Paneli / Control Panel PLC Otomasyon / Automa

Hydraulic Tracked Drilling Machine - Meteor

Type: Stone Quarry Machines › Quarry Drilling Machine › Hydraulic Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Hydraulic Tracked Drilling Machine has the function of squaring (turning masses into blocks). It is autonomous, hybrid and automatic (drilling and horizontal movement). It can be remote controlled from a distance. It has lateral displacement and inclination in the tower. Individual advance control system for hammers to optimize performance. Patented. Key Features and Specifications Autonomy: The machine is autonomous, hybrid, and automatic for drilling and horizontal movement. Control: It ca

Crosscut Saw KS 40 Mitre Saw, Edge Cutting Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Crosscut saw KS 40 The good cut A good crosscut saw belongs in every stone processing plant. We offer a wide range of crosscut saws, from the simple crosscut saw to the swiveling machine for miter and angle cuts.

Brembana Venkon - 5 axis monoblock CNC bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Its the new generation of a numerically controlled 5 axes Bridge Saws. Extremely compact and easy to install; it doesnt require any foundations, even as a possibile re-installation. The machine is built with the needs of workshops in mind and it is used for cutting slabs up to 200 mm in thickness (with blade 625 mm) of natural stone, synthetic stone, and ceramic. Advantages: - The weight of the machine up to 4.400 kg guarantees high constant precision over time. - Blade automatic redressing stat

TC1350 V2 CNC Bridge Saw 5 Axis Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

5 axis CN machine (3 or 5 interpolated according to the versions), the TC1350 V2 permits to make cuts in all directions automatically without moving the slab. The 360° disc rotation does not require any turning table. Standard equipment: Cross Laser Line Laser Lubrication unit Remote control Touch-screen 15″ console 1 disc housing Ø1650 mm Optional extras: Fixed, mobile or tilting table Tool sensor Camera Tool magazine 11 slots Available versions: Track lengths available : *5880 mm *8505 mm *111

Universal SNM-PM Mono-Block Profiling And Cutting Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Multipurpose Manual Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The SNM-PM is a heavy-duty high precision mono-bloc profiling and cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite, cement, etc. It is easy to handle and maintenance free. This machine is equipped with a laser device for very precise copying of profiles and has an optional feature of two diamond blades that doubles its profiling capacity. Main characteristics: Head guide ways are in hard chrome.

Rupes 3-Head Manual Rotary Bush Hammers

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

These manual bush hammering tools are the result of our exclusive planning and production processes; different makes and types of edge polishing machine available such as: "BOSCH - FLEX - MAKITA - RUPES" and others on request, all electrically-operated at 900W with variable speeds from 1500rpm to 4000rpm, supplied with a 3-head rotary bush hammer plate with diameter of 100 mm, with grain of choice from the 6 models available. Different machining processes can be carried out, including non-slip s

MARBLE BENCH SAW W/BELT DRIVE TRANSMISSION – ITC 1200 AV

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Marble bench saw ITC AV/AA with toothed belt-drive transmission system. Perfect for both building sites and for small-medium marble-works. Ideal for cutting brickworks, natural stones and stone-like materials, bricks, marbles, granites and Grès porcelain stone-wares. A solid and precise wet saw, available with manual advancement of the cutting head (by means of a flywheel on the right hand side of the machine) – model “AV” – or motorized (with inverter for regulating the speed of advancement) –

TWISTER PENTASPEED portable electronic edge profiling machine

Type: Stone Hand Held Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The fist and only portable electronic profiling machine, with inverter. It has five different speeds making it capable of working every type of stone: marble, granite, composite material, synthetic material, cement etc..

Stone Crusher-Smart 50

$3,000 - $6,000

Type: Stone Quarry Machines › Rock Crushers, Jaw Crushers

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Stone Crusher-Smart50 This is a small,practical and silent jaw crusher to make gravels. Good for stone fabricators to make leftover stone valuable. The reinforced mouth gives long life of the machine. The machine is equipped with the separator. For crush small stones,make waste stone valuable.

Hydraulic Quarry Drilling Machine

Type: Stone Quarry Machines › Quarry Drilling Machine › Hydraulic Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

22 -11 L/DK. HYDRAULIC PUMP Accessories: Fixing chain and pile, long centering tip for corner holes, pipe wrench

Phoenix 43 Es Single Brush Floor Polishing Machine

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Phoenix 43 ES, thanks to its high motor power, and high brush rotating speed, it’s the ideal machine with the dedicated accessory for all high specificity applications, such as smoothing of (dry) cement substrates, marble, granite, stones, wood and resin floors. The high elasticity and power of its engine together with high brush rotating speed ensures excellent performance. The high reliability and wide range of accessories, make it essential for whoever uses it as his daily working tool. The e

Superior Edge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Our SUPERİOR machine is patented and not imitated. With the help of a half-up mechanic hand, there is a CENTRAL CASE force mechanism. There is a wheel movement system on the tapla that allows the marble to slide easily and when it is started, the mechanism opens itself and the stone provides comfortable movement. The machine, which is mounted on a steel frame, has a closed and oil reservoir rail system, and the speed control and the dimensions given with the desired cutting speed make precise cu

Discovery 5 Axis Plus CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

It is equipped with a suction cups device, used to move cut pieces to increase the production process while reducing processing time. Machine frame and work table made of hot galvanized dipped electro-welded steel that guarantees high water resistance. Digital brushless type axis drives, coupled with high precision gear motors, linear guides with recirculating balls protected by bellows, allow for extremely precise cuts. The blade motor has 24Hp - 17.6 kW power, can reach a maximum speed of 4300

Slim Driller - Pneumatic drilling machine

Type: Stone Quarry Machines › Quarry Drilling Machine › Pneumatic Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Pneumatic drilling machine with a down-the-hole hammer for vertical and horizontal holes, for insertion of diamond wire.

Lapisystem Robotic Wiresaw Carving Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving Robot

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Lapisystem with wire saw head T&D Robotics has developed and patented the new wire saw application for the robot. Thanks to its ( also patented ) system of interchangeable flange, the robot can pick up whatever end effector he needs : electrospindle , disc , waterjet head , wire saw. The wire saw application has been applied on the carving of a 120 tons block in Carrara at Company Tor Art , which long time partnership with T&D Robotics is proved by the 4 ( the fifth is coming ) robots in the com

U Type Container Loader, Slab Container Loading Boards

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Container loader Boards HELPFUL uploads and downloads PACKAGES OF TABLES Undoubtedly one of the most efficient in the process of boosting transport marble tables tools. This tool allows upload and download packages of tablets in closed containers with the crane, as reflected in the next picture. features Weight: 1,440 kg. Max Load Weight: 4 Tons Crane load. Min 5 Ton Dimensions: L 6000 mm. X 1500 mm

Scandinvent Cx4 - 4-Axis Cnc Work Center Sawing, Milling, Polishing

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

CX4 - 4-axis CNC Work Center Sawing, Milling, Polishing - Full production, just one machine! The CX4 has been designed with high production in mind. With the CX4’s compact design, open gantry for easy loading and innovative, easy-to-use software you will save valuable time on the whole CNC process Benefits To Be Mentioned • Easy to install and operate • Compact size • Fully automated tool change • ScandSOFT software included • Interpolated, automatic 4-axis

TMC/3 - Multiple Automatic Mosaic, Strip, Tile Cutting Machine with 3 Heads

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

PATENTED Automatic machine for cuts, antislip incisions, pre-cut and special cut such as: mosaic, triangle, rombhus. Able to work with marble, granite, gres porcellanato, agglomerated, brick and single-double firing. ADVANTAGES OF TMC3 SYSTEM - On the shaft of motor-spindle it is possible to mount till 4 cutting blades, divided by spacers and flanges, in order to obtain different sizes and multiple cuts contemporarly. - The motorized conveyor belt improves the working quality and allows the prod

Vibratory Tumbling Machine - T600

$2,000 - $6,000

Type: Stone Factory Machines › Stone Surface Processing Machines › Vibratory Tumbling Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Tumbling Machine-T600 Tumbling Stone Mosaic Polishing Machine It is an ideal machine for antiquating and polishing of small pieces of stone such as mosaics. The tumbling machine is equipped with a motor vibrator and a polyurethane tank. The wearable material guarantees the long life of machine.

MB 2003 - Satellite floor grinding machine

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

One of our best-selling products: spread all over the world, and meeting any machining need you may have, this grinding machine is now a "must have". MB2003 combines high performance, weight and compact size: even though it weighs only 100 kg, it is able to handle every stage of processing, ensuring perfect flatness and comfort when working. Above all, the roughing phase is perfect thanks to the double rotation as well as the size of the plate, thus allowing one to speed up the following phases.

Denver Tecnika Elite /Tecnika Elite Solid 5 axes monoblock bridge saw

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Tecnika ELITE is the new 5-axis interpolated cutting center specifically designed for processing natural and engineered stone, ceramic and ultra-compact materials fully meeting the very parameters - speed, accuracy, working strokes and software interface - required for all tasks connected to efficient slab fabrication encompassing trimming, de-tensioning cuts, mitering, multidirectional and curvilinear jobs, as well as inner cut-outs. Advanced materials such as engineered stone, ceramic and othe

Universal CNC working center for stone MASTER 850-1200

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

THE PERFECT COMBINATION OF POWER AND PRECISION The Master 850-1200 range represents the evolution of large Intermac machining centers for the machining of sheets, slabs and blocks of natural and composite stone. The uniqueness of this machine is that it can achieve a very high quality finish not just on sheets but on slabs and blocks as well. It's the ideal "all in one" solution for marble processing applied to construction, monumental, funerary and architectural projects. STURDY AND ROBUST Stur

Portable Shaping Machine and Edge Profiling

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

ART.162 PORTABLE SHAPING MACHINE AND PROFILING DIAMOND WHEELS FOR MARBLE AND GRANITE

Kap-04w Air Wet Polisher for Marble, Granite, Ceramic

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

For polishing of stone, marble, granite and ceramic tiles Always supply adequate water during operation Pad size 3-15/16 in. 100.0 mm Free speed - 6,000 r.p.m. Length (w/o pad) 8-7/16 in. 214.0 mm Height (w/o pad) 2-1/4 in. 57.0 mm Weight (w/o pad) 2.6 lbs 1.2 kg Air consumption (Normal) 20.1 c.f.m. 0.57 m³/min Hose size 1/4 in. 6.5 mm Air Lead Hose 16.40 ft. 5.0 m Water Hose 16.40 ft. 5.0 m ※ Performance figures are at 0.62 MPa(Pe) (90P.S.I.) air pressure.

Comandulli MUSA Conveyor Belt Edge polishing machine for straight edge

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Conveyor belt machines Belt Edge polishing machine for straight edge. MUSA, so much value locked up in a compact design. Automatic edge polishing machine able to perform all the finishing field, furnichings and monuments. It performs gauging, straight edge, bevels, lower and upper groove through fast and simple procedures. Features THE EXCLUSIVE FEATURES OF A COMANDULLI MACHINE MUSA Steel structure, electrowelded, fully worked by milling machine. All our machines are protected against corrosion

Prodim Software Stairs Check

Type: Stone Hand Held Machines › Tile Surface Scanners

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Prodim Stairs Prodim Stairs is Prodim’s unique solution to measure and fabricate stair coverings. Using this solution, a staircase can be measured easily and accurately. Within minutes the job can be done! It does not matter how complex a staircase is. The Proliner covers all the shapes and styles of each single step. It can measure every aspect of a stair. All stairs (wooden, stone, metal or glass stairs) follow the same procedure with our digital templating device. Prodim Stairs Check With the

MEM 2000 - MEM ECO Single Wire Cutting,Block Squaring Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone

Machinery Function Features:

The MEB 2000 wire saw from Grani Roc is a machine designed for dressing and slabbing stone blocks. The machine is built with the classic setup of static structure and rotating trolley to position and to move the block. · The bridge structure and pillars of the machine are built in laminated steel. All surfaces of contact between the different parts are machined for guaranteeing high precision in assembly and also in the cutting process. · All the steel elements of the structure are subjected to

SMART LINES 30/40/45/60 Customized Resin Line with Combined Static Storehouse

Type: Stone Factory Machines › Resin Line Machines › Automatic Filling-Resining Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SMART LINES 30/40/45/60 PRODUCTION CAPACITY: FROM 10 TO 20 SLABS/H “CUSTOMIZED“ RESIN LINES STOREHOUSES TYPES RESIN LINES WITH STATIC COMBINED STOREHOUSES Smart Lines are characterized by the fact that the drying and catalysis stores are assembled in the same machine. The capacity of the store can change according with the production capacity needed. Starting from a store capacity of 30 slabs, with the line Smart 30, for a maximun production of 10 slabs hour, it’s possibile to join a store capac