Quartzite

Kolb Ke-Multi Bridge Saw Machine

$120,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Please call for pricing and availability. Freight shipment only.

Vibrationstechnik Model Sw 150 Manual Cutting Machine

$2,288

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

motor with 230V power supply with a capacity of 2.0 kW or 400V power of 2.9 kW, 2,800 revs / min. Mobile ideal saw for work on construction and renovation areas customer by a system of folding legs and quick release head for easy transportation in the car combi very simple to operate rail to cut 45% long-lived 12 - bearing sliding head galvanized worktable integrated water pump 40 height-adjustable cutting head to discs 250 mm and 300 mm -25.4 shaft diameter mm Maximum cutting depth of 80 mm max

MB Extra - Satellite floor grinding machine

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The range that combines great performance and environmental sustainability The small, medium and large size Green Line satellite grinding machines renews a classic Menghini & Bonfanti with specific equipment also for dry processing. Built with innovative design and ergonomic structure for a comfortable use. Great performances: Excellent results in quick time to carry out any process on every kind of surface. Inverter to adjust the speed and optimize the performances according to the working phas

Master 23 Work Centre CNC Carving Machine, CNC Profiling

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

PC controlled work centre, Master 23 is Intermac’s new proposal dedicated to the stone processing. The careful analysis of the commercial and technical requirements filtered by Intermac experience, have brought to the intuitive conception of an easy operating machine, where the numerical control is completely integrated into the PC structure with Windows XP, that allows an automatic machine management and high configurability. Thanks to its high technology and flexibility, Master 23 can be adapt

Profiling Machine ΚΤY-350

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

DIMENSIONS (L X W X H) (MM): 5600 X 2950 X 2250 BLADE DIAMETER (MM): Φ350 – Φ500 BLADE’S VERTICAL SROKE (MM): 250 HEAD INCLINATION (FOR SIDELONG CUTS): 0 – 45 & VERTICALLY CUTTING TABLE’S ROTATION RANGE: 0 – 360 (ELECTRONICAL CONTROLLED) POWER OF MAIN ENGINE: 15HP / 11KW SIZE OF CUTTING TABLE: 0 – 85 WEIGHT (KGR): 4500 AUTOMATICALLY LUBRICATED: AVAILABLE MATERIAL OF CONSTRUCTION: CAST IRON & IRON AUTOMATED COPY SYSTEM: AVAILABLE UPON REQUEST METAL SUPPORTING BASE: INCLUDED ΜΙΝΙ REMOTE CONTROL

ARTEMISIA New Customized Slab Polishing Lines

Type: Stone Factory Machines › Stone Surface Processing Machines › Slab Polishing Line Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

STRENGHTS The machine can be considered the state of the art of polishing machines. BEST QUALITY IN POLISHING HIGH PRODUCTION RATE LOW OPERATING COST Thanks to: Highest reading precision of the shape of the slabHighest stability of plates holding the abrasivesFast and accurate movement of the head due to HSS systemErase of “shadow” problem on the polishing surface thanks to the Proportional ValvesVery high dynamic of the beam thanks to its perfect balancing and to the couple of brushless motors

Art 131 Floor Smoothing Machine for Marble and Palladiana

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Marble, Limestone, Onyx, Quartzite, Sandstone, Travertine

Machinery Function Features:

Floor smoothing machine for marble and palladiana: Three-phases motor HP 4,5 Gas engine HP 8

Mobile Crane

Type: Stone Factory Machines › Stone Handling, Loading Machines › Wheel Loader for Blocks

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone

Machinery Function Features:

Mobile crane riconditioned from mother factory. Capacity 9 ton

Quarry Diamond Wire Saw

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Machinery Function Features:

Quarry Diamond Wire Saw Machine to extract stone from land. Extracting stone from land. Cutting big block / boulders on site. Small cutting loss / Smooth cut surface. Low sound cuttng.

Demetrius Multiwire Stone Wire Saw Machines

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Wire Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Using years of experience in building diamond wire cutting machines, Poeiras by Indseq developed Multiwire Demetrius Machinery Line allowing its clients to choose between roller and fixed models. Each diamond wire has an independent tensioning system, allowing the total tensionning effect and the downward moving speed create an optimal cut while reducing the diamond wire fatigue of to the minimum.

35 Tons Lift Truck

$296,500

Type: Stone Factory Machines › Stone Handling, Loading Machines › Wheel Loader for Blocks

Warranty: 36 Months

Usage: Granite, Marble, Limestone, Quartzite

Machinery Function Features:

35 tons lift truck for stone handling www.uplifting.es

Technosplit 220 Ton Multitooth Complete Line

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Technosplit 220 Ton multitooth complete line (machine+hopper+conveyour belt+accesories) Model TS 100/140X40

DGS1800 Marble Strips Gang Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Multi Blade Gang Saw

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Machinery Function Features:

DGS1800: Marble strips gang saw Marble gangsaw, version whit the lifting of the block, specifically designed for the cut of layers into strips up to a height of 650 mm. The layer is fixed on the platform by a vacuum system which allows the perfect anchoring of the material during the cutting solicitation. When the blades are completely inside the material, an automatic oleodinamic pusher starts in order to make the strips compact in to keep the stability even if the material is fragile or defect

Mfc Monowire Saw Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Monowire is a cutting machine for ornamental stone diamond wire that has as main purpose the preparation of the raw material extracted crude for further processing. For the same reason, it is prepared to process large blocks and can run sheet for sawing or polishing disc by cutting, or simply hit blocks for mills strip or multiwire. One of the main advantages of the diamond wire cutting, in addition to smoothness and low power consumption, is precisely cut large floor area, far superior to any d

SIMECWIRE/01 - Monowire machine for cutting and squaring blocks

Type: Stone Factory Machines › Stone Block Cutting Machines › Single Wire Block Squaring Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

SIMEC completes its range of multiwire machines SIMECWIRE SW with different solutions for squaring blocks and cutting thick slabs by means of monowire machines. The SIMECWIRE/01 machines can be efficiently used for preparing blocks to the next cutting phases, performed by multiwire machines or they can also be directly used for sawing blocks into slabs, assuring the highest standards in terms of accuracy and productivity for this typology of machines. Granite, Marble, Block, Blocks, Monowire, 5.

EASYBEVEL The Beveling Machine For Stone

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Transform your angle grinder into an unerring beveling machine to make a chamfered edge without any difficulty, also on hard materials. WHICH PROBLEM DOES IT SOLVE FOR THE STONE FABRICATOR? Easybevel allows you to bevel any kind of stone and ceramics with the highest precision and finally forget the nightmare to fix the angle of beveling: you do not need to hold it at a certain angle, you just fix the desired angle at the beginning and move the machine from the left to the right. STONE PROCESSIN

Globo Variaxis Plus XL 5 interpolated axis CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Multifunction with 5 interpolated axis managed by new generation numeric control that manages both automatic movements of all axis that the new device with suction cups used for the shift of the pieces. The structure of the vertical carriage in the form of a cage, is performed in electro-welded steel which ensures the machine more stability and rigidity, minimizing the vibrations generated during processings. The high speed movements of the X, Y and Z axis, are obtained with brushless motors and

EasySTONE NC - Touch CAD/CAM for stone processing used for CNC routers

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

EasySTONE NC is the touch CAD/CAM software solution for stone and related materials processing designed to be installed onboard the CNC router. The touchscreen and its catchy interface allows you to generate in a simple and intuitive way. Possibility to add customizable commands for CNC interactive control. NC Interface EasySTONE NC is the operator interface of the machining center: direct and customizable commands improve the use of numerical controls. The touch-screen and its catchy interface

GMM - RADIA automatic bridge saw block cutting machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The RADIA automatic bridge saw is a large machine ideal for small, medium and large companies for cutting stone, marble and granite, in both manual and automatic cycles. This machine also produces complex profiles and shapes on a very large cutting surface. The ability to use a blade with a diameter of 1200 to 1600 mm The saw is made of cast iron and stainless steel guards. The standard machine ships with the following options: * with motor drive and programmable head for marble and granite, * o

Maya-625 Bridge Saw Machine

$45,000 - $48,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Steel Frame No need to build concrete walls Main Motor Direct Drive - 20 HP (220V 3 phase 60Amp.)+/- 5% regulated 30 kW Engine Speed Cutting speed 1450RPM Production Rate 10’ in 3cm (1 1/4") granite in less than 60 seconds Cutting Thickness 4"-7" (auto cut computerized) Step Cutting (Two way cutting) Over all dimensions (L x W x H) 19' x 16' x 8.5' (6.5 x 5.5 x 2.8 m) Table Turn/Tilt "http://www.marbleservices.com/Bridge_Saw/Rotating_&_tilting_table">Powered tilting 85° & Power rotating 0° - 360

12" Hand-Held Planetary Surface Polisher

€2,545

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite

Machinery Function Features:

This planetary polisher / grinder used three 5" pads to produce a flatter, scratch free, swirl-free, higher-polish finish than a single-head machine. This workhorse of a machine uses an active gear/chain transmission to drive both the heads and base in opposite directions. It has a center coolant feed, built-in vacuum port and operates wet or dry. The custom made triple sealed bearings and unique transmission air flow make this the most durable machine on the market. Powered by a 3 year garranti

Overhead Crane

Type: Stone Factory Machines › Stone Handling, Loading Machines › Gantry Crane, Overhead Cranes

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Northwood CNC Router

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Marble, Limestone, Quartzite

Machinery Function Features:

The machine above has a 20-position, Dynamic Tool Changer, 1.25 diameter steel Part Location Stops, and a Trespa Matrix Fixture table. Matrix tables are available in several materials including aluminum and can include many integrate options. This front to back design allows for easy loading and unloading by allowing access to three sides of the work envelope.For dust and chip collection, Northwood offers a dust hood with up to 10" outlet that is capable of significantly reducing airborne partic

Pantographs Sculpture Carving Machine, Engraving Machine

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Carving,Engraving Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Pantographs Sculpture Carving Machine Ideal machine for making funeral attributes or advertising boards

Master Wholesale Hand Held Marble & Granite Economy Dry Polishing Kit-Grade Diteq G30005 Variable Speed Grinder

$139

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Shipping: Free Shipping Status: In Stock - Usually Ships in 24 Hours Condition: New This kit contains everything you need to start polishing stone counters and tiles. The kit includes our imported (yet sturdy professional grade) Diteq G30005 variable speed grinder, a 7 piece set of RockMaster Diamond Dry Polishing E-Pads, and a 4" velcro pad holder. For the do-it-yourself crowd, this is the ideal way to get professional results at an affordable price. Professional Grade Diteq G30005 Variable Spe

JPG260 Straight Grinders Collect Type Air Tools Used for Grinding, Polishing and Deburring

€198

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Collect type air tools used for grinding, polishing and deburring, using mounted points and carbide burs. The compact size and low weight also allow for machining in tight spaces without tiring the operator. The Sorma range includes tools with speeds ranging between 25,000 and 80,000 rpm with a fixed or interchangeable collet *Fixed type collet chuck microgrinder *High torque and tight tolerance in rotation

Stone Single Head Cutting Machine, Archway and Cornice Machine

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

CONSTRUCTION OF VAULTS, ARCHWAY AND CORNICES MACHINES The machine has 3 settings, detailed as follows: 1) the first setting is provided with milling helical cutter with a diameter up to 5-6 mm, tilt in degrees, for the realization of the ribs of ashlars and, providing proper knives, for the realization of the frames; 2) the second setting is provided with diamond blade tiltable with 800 mm diameter for the cutting of the blocks in degrees; 3) the third setting is provided with helical cutter of

Gpw001 Air Grinders- Gpw002 Air Grinders

Type: Stone Hand Held Machines › Stone Air Polisher, Grinder

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

Description: 1) GPW001 AIR GRINDERS GPW-7L TECHNICAL FEATURES: -Spindle thread: M14 -Speed: 4500 giri/min. -Weight 1,16 kg. -Length: 242 mm -Air flow: 0,49 m3/min. -Pressure: 90 PSI 2) GPW002 AIR GRINDERS GPW-221L TECHNICAL FEATURES: -Spindle thread: M14 -Speed: 3600 giri/min. -Weight: 1,61 kg. -Length: 295 mm -Air Flow: 0,27 m3/min -Pressure: 90 PSI -Size pipe: 6,5 mm

TBC 90/2 HD-TBC 90/2 Heavy duty quarry drilling machine

Type: Stone Quarry Machines › Quarry Drilling Machine › Pneumatic Drill Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Heavy duty drilling machine for one or two hammers, with automatic thrust adjustment, air motor for travel on the rail and air oiler. can be used for both vertical and horizontal drilling.

EBC Quarry Wire Saw Machine

Type: Stone Quarry Machines › Quarry Wire Saw Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

* The machine is built with electro-welded machined steel that garantees precision, toughness and durability. * Electric direct motor with smooth start of the main wheel through inverter allowing to increase progressively the wire speed and to tune the lineal speed of the wire. * Motorized rotation of the main wheel head 180º * Security system that stops the machine in case of problems (wire breakage, overload on the main motor, etc.). * Wheel drive Ø400 mm that guarantees a good transmission of

Aspirio P Suction Wall with Nebulized Water Filter

Type: Stone Factory Machines › Stone Factory Cleaning Equipments › Water Treatment Equipment

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

ASPIRIO P Suction wall with nebulized water filter. Great abatement efficiency guaranteed by 4 stages of filtration. https://sites.google.com/biogeria.com/biogeria-ing/home

GR-CP CNC Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The wide variety of GR CP machines allow us to work with discs from 350 mm to 800 mm. These machines are the perfect option to cut marble, granite, silestone, dekton and many more. They can also cut mitres, make moulding and make several different shapes. All the machines GR CP are made to increase production, and besides they make to the marble-workers their work easier and faster. Optional Accessories: - Laser positioning system - Table with rotatory system from 0o to 360o - Speed controller f

Automatic Strip Polisher

Type: Stone Factory Machines › Stone Surface Processing Machines › Slab Polishing Line Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Automatic strip polisher used to polish rough material, granite and marble surfaces. There is a first zone which incorporates the gauging headstocks. The second one is provided with the polishing headstocks which have a swing movement in order to guarantee a good finish result. This machine enjoys an accurate design. On the frontal part there is a strip with transparent components as well as the headstocks and strip controls so that the work which is being done can be comfortably controlled and

BILDA handheld slot milling machine

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine

Machinery Function Features:

BILDA handheld slot milling machine makes narrow half-moon precision slots in the sides of facade panels of various materials, mainly natural stone and ceramics. The slots are compatible with BILDA cladding system, which comprises a special grid substructure and interface components. The machine is designed for productivity and ease of use. ADVANTAGES: • Easy to operate without special technical training of the operator • Lightweight, compact and easily transportable • Slots are produced with pr

Ve Tt - Slide Table with Double Mold for the Plastic Coating Of the Diamond Wire

Type: Stone Factory Machines › Stone Handling, Loading Machines › Stone Tools Machinery

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

VE TT - Slide Table with Double Mold It allows an high productivity, allowing the operator to unload the finished pieces and to load the new inserts Designing and building injection molding machines for the plastic coating of the diamond wire..

Bridge Cutting Machine

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Coch R30 Cnc Stone Working Center

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › CNC Working Center

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Machinery Function Features:

R30 Multipurpose Work Station Machine, accomplish sink cut outs millings; drilling, profile polish of edges, and polish scratches from surfaces as well. Its table has a 2° angle inclination to accomplish draining boards too. Its variable speed from 200 – 10,000 RPM assures an expedite high-quality job. And because its “inter-changeable bit spindle” works using water one can feel good about not having dust issues.

Block-cutting Machine-LT 1204

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Machinery Function Features:

Block-cutting machine-LT 1204 The block cutting machine LT 1204 with four columns is built for the processing of marble blocks from which one can obtain strips in various sizes and thicknesses for the production of marble tiles for floors and walls, steps, jambs and other products for the building industry. The machine is composed by four carrying columns made solid by four steel cross beams.

Stone Cutting Saw

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine

Bridge Sawing - Profiling Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Quartzite, Travertine