Post Your Needs
2948

Slate Stone

(2,948)Have Prices
Bestlink Factory 30HP 60HP Thin Stone Saw Cutting Machine

Bestlink Factory 30HP 60HP Thin Stone Saw Cutting Machine

$12,500 - $16,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Strip Cutting,Edge Trimming Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Bestlink factory 30HP 60HP Thin Stone Saw Cutting Machine for Basalt Stone VS series thin stone veneer saw (mighty stone saw) make cutting thin stone veneer flats and 90-degree corners quick, simple, low maintenance,and profitable. The unique v-structured cutting surface easily cuts split-face or natural finished sandstone, brick, limestone, and other hard stones up to 16" high and 2.5" thick. A single pass through the saw turns large stone pieces into thin stone veneer with unmatched consistenc

BTC-2800 Multi Blade Granite Block Cutting Machine

BTC-2800 Multi Blade Granite Block Cutting Machine

$27,000 - $35,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

BTC-2200/2500/2800 Multi-blades Granite Marble Bridge Block Cutting Machine uses inverter to control left-right feeding, speed adjustable. It uses hydraulic lifting system, combined with four guide poles, also Guide Sleeve with multi-functions layer seals, like waterproof, dustproof, anti-spill. Forward-backward slicing uses high-precision screw nut driving, automatic slicing. Main spare parts adopt imported good-quality materials, the block can be placed on the ground directly. Thus the whole m

Portable Drill For Stone Anchor Of Wall Panel

Portable Drill For Stone Anchor Of Wall Panel

$900 - $1,000

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Portable Drill for Stone Anchor of Wall Panel Application: Stone hand drill machines for granite anchorage used to drill holes for undercut anchors in ceramic or stone panels of granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board, etc. For wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, tools. Packing: Export Wooden Packing. Advantages: 1. High quality with long life. 2. High working effici

Multifunctional Hydraulic Stone Leftover Recycling Stamping Machine

Multifunctional Hydraulic Stone Leftover Recycling Stamping Machine

$5,000 - $8,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Stamping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Bestlink Multifunctional Hydraulic Stone Leftover Recycling Stamping Machine CP90 is specially designed for changing leftovers of slabs or tiles into different shapes with different moulds by hydraulic system inside; And it also has the function of splitting stone of long bar; Furthermore, it could be used for natural face splitting; The CP-90 machine have the output around 50m²~100m² per day,certainlly,if the operators have very good experience and skill,the yield will be much more,the machine

QSZQ-1400 Medium Bridge Stone Cutting Machine

QSZQ-1400 Medium Bridge Stone Cutting Machine

$21,500 - $22,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This machine uses hydraulic lifting system (or screw lifting system).It uses inverter to control left-right feeding, it can adjust the cutting speed according to the stone material hardness. Main spare parts adopt imported good quality materials. Main power: 30 KW, Max diameter of blade: 1400mm; Thus the whole machine is featured as high cutting efficiency, high stability, easy- operating to suit products.

Giant Disc Bridge Saw Machine Block Cutter-BL3000

Giant Disc Bridge Saw Machine Block Cutter-BL3000

$23,000 - $26,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Block Cutter – BL3000 The block cutter is for cutting marble and granite blocks. It uses either single blade or multi blades. The machine has single cut or multi cuts cycles. The beam moving automatically gives the accuracy of the cutting. The X-axis cutting speed is controlled by an inverter. The movement of the beam and spindle are on prismatic guides in oil bath. They are designed to avoid tilting and jumping of the spindle. This solution eliminates the blade deviation during the cutting at a

Hand Grinding Polisher Machine Single Head Hand Polishing Machine

Hand Grinding Polisher Machine Single Head Hand Polishing Machine

$9,000 - $15,000

Type: Stone Factory Machines › Stone Surface Processing Machines › Arm Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Wisdom Arm Polishing Machine is made of high grade cast iron. The polishing arms have thick walls to avoid breakage. Quality bearings used in the arm joints and polishing head ensure the arms swing very flexible and long working life. Wisdom Arm Polishing Machine is suitable for polishing the kind of slab with thickness not varying too much.

DQCM-26-75-A Heavy Duty Structure Multiblade Block Cutting Machine- Big Disc Bridge Saw Machine

DQCM-26-75-A Heavy Duty Structure Multiblade Block Cutting Machine- Big Disc Bridge Saw Machine

$48,000 - $53,000

Type: Stone Factory Machines › Stone Block Cutting Machines › Giant Disc Bridge Saw Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

DQCM-26-75, Dual driver heavy duty block cutting machine, adopts our patented dual-drive mode(one pull and one push) for moving left and right, and can adjust the moving speed according to the material, and cooperated with the Dual V-track beam track, so moving more stable; lifting using hydraulic, with four guide post made of 200mm solid round steel chrome-plated; front and back adopt screw drive and double nut drive, and cooepate with the oil-immersed sidebeam rail, which is more wear-resistan

Manual Drilling Tool For Stone Wall Cladding

Manual Drilling Tool For Stone Wall Cladding

$900 - $1,000

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Manual Drilling Tool for stone wall cladding Application: Stone hand drill machines for fixing anchor used to drill holes for undercut anchors in ceramic or stone panels of granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board, etc. For wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, tools. Packing: Export Wooden Packing. Advantages: 1. High quality with long life. 2. High working efficiency.

5.5HP Semi-automatic Concrete Floor Polishing Machine

5.5HP Semi-automatic Concrete Floor Polishing Machine

$3,500 - $3,700

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Operating width 550mm Grinding disc 230mm*3 (3heads) Rotating speed 300-1600rpm Horse power /HP 7.5HP Voltage 380-440V three phase Weight 230kg(include addweight 30kg/piece) Water tank 30L Packing size 120*75*115 Delivery time 1 week Payment term TT/Western Union Certificate CE/SGS/ISO9001 Configuration Wonder motor and Delta inverter

11 Ton All Terrain Forklift Jib Crane For Lifting Marble Loading Work- Jib Arm/U Type Container Loader

11 Ton All Terrain Forklift Jib Crane For Lifting Marble Loading Work- Jib Arm/U Type Container Loader

$50,000 - $60,000

Type: Stone Factory Machines › Stone Handling, Loading Machines › Jib Arm/U Type Container Loader

Warranty: 18 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The Jib Crane Loader works with front-wheel drive, rear-wheel steering, rigid suspension; adopt total four hydromechanical drive gear-boxes in the back and front as the transmission, hydraulic power steering, caliper disc brake; the working device is composed of two quadrilateral portable telescopic arms and a rotary boom. It is specially used for lift on/off the stone slab container and it can also be used as a normal crane. It is widely available for the factory, dock, goods yard, forestry cen

Daewoo Bucket Tooth Pins And Retainer  DH60,DH150,DH200,DH300,DH420

Daewoo Bucket Tooth Pins And Retainer DH60,DH150,DH200,DH300,DH420

$1 - $2

Type: Stone Quarry Machines › Quarry Heavy Equipments › Excavator

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Daewoo bucket tooth pins and Retainer: 2705-9014,2705-9015,2705-1020,2114-9008,2705-9010,2114-1849,2705-1021,2114-1849,2705-1034,2114-1931. Minimum Order Quantity: 500 PCS HRC:38°-42° Material:40Cr Place of Origin: Ningbo,China Certification: ISO9001:2008 Packaging Details: Carton box + Wooden case Delivery Time: 25-30 days after confirmation of the order Payment Terms: T/T Supply Ability: 500 tons per month

Facade Anchor Drilling For Undercut Bolt

Facade Anchor Drilling For Undercut Bolt

$900 - $1,000

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Facade Anchor Drilling For Undercut Bolt Application:Stone hand drill machine for limestone anchor used with diamond drill bits to drill holes for undercut anchors in ceramic or stone panels of granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board, etc. For exterior and interior wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, tools. Advantages: 1. High quality with long life. 2. High working

CNC Block Dividing Machine Single Wire Saw Block Squaring Machine

CNC Block Dividing Machine Single Wire Saw Block Squaring Machine

$30,000 - $50,000

Type: Stone Factory Machines › Stone Block Cutting Machines › CNC Diamond Wire Shaping Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

1) Equipped with CNC system, which makes the man-machine interface easy and flexible. 2) Flywheels tension has a stable, constant stretch mode to enhance cutting accuracy. 3) Cutting speed is adjustable according to different requirements. 4) High efficiency, the slates it processed are of exact size, and the margin is flattened and sleek.

APM-350-2000-10 PLC Mable Granite Arc Slab Polishing Machine

APM-350-2000-10 PLC Mable Granite Arc Slab Polishing Machine

$27,500 - $30,000

Type: Stone Factory Machines › Stone Surface Processing Machines › Single Head Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

APM350-2000,Arc Slab Polishing Machine fix the arc slab by vacuum sucker, replaced conventional clamping fixing on both sides, solved the deviation of the squareness and Xianda APM-350-2000 Natural Stone Circular Slab Polishing Machine inclination which were generated by the steps trimming-grinding, at the meanwhile, clear the customer's concerns about arc slab edge & angle damage. Machine adopt linear guides, multi grinding head and PLC system. it has a high-precision, high efficiency, easy ope

Hand Held Stone Splitting Cutter -Breaking Machine For Mosaic

Hand Held Stone Splitting Cutter -Breaking Machine For Mosaic

$400 - $600

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 6 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

The mosaic chopping machines are the result of a very long experience, we acquired in the construction of this kind of tools. The weight of each part and the relation occurring between them are fully optimized with the result that is possible to obtain a precise and effective cut just with a minimum effort. Both of the machines are realized for cutting various sizes of stones: Tesserae, cubes& all the shapes desired. The structure of both the machines is realized in steel, while fly-wheel and sl

HCM -600 Manual Stone Cutting Machine

HCM -600 Manual Stone Cutting Machine

$5,000 - $6,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Multipurpose Manual Machine

Warranty: 12 Months

Usage: Granite, Marble, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

This machine used fully enclosed dust-proof system,easy tomaintain, which is suitable for tombstone, paving stone, shape cutting.

Portable Mitre Saw Wet And Dry Cutting CTS 800

Portable Mitre Saw Wet And Dry Cutting CTS 800

€3,250

Type: Stone Factory Machines › Stone Tile Cutting Machines › Mitre Saw, Edge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Construction site saw wet and dry cutting CTS 800 € 3,250.00 * excl. VAT plus shipping costs Available again soon Product number: O09.190 description Product information "Construction site saw wet and dry cutting CTS 800" Perfect machine for wet and dry cutting Efficient dust extraction in a closed system with a cyclone filter as a pre-separator Cutting table with ball-bearing rollers Delivery including universal cutting disc 350 mm Ø, noise-dampened The vacuum cleaner is not included in the sco

J. Konig GmbH & CoJ. Konig GmbH & CoGermanyGermanyContact Supplier
4 Head Horizontal Drilling Machine Anchor Hole Machine Side Drilling

4 Head Horizontal Drilling Machine Anchor Hole Machine Side Drilling

$12,000 - $15,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Stone Drilling, Slot Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

4 Head Horizontal Drilling Machine Anchor Hole Machine Side Drilling Main application: This stone drilling machine is suitable for PC side drilling holes for stainless steel dowel pin anchors in various kinds of stone panels, such as marble, granite, sandstone, travertine, basalt, limestone, quartzite, artifical stone, high-density cement panels...etc. The main accessories are originally imported, manual control of advance and retreat, high-speed spindle drilling, and automatic control of drilli

Infrared Bridge Saw For Quartz Kitchen Countertop Making

Infrared Bridge Saw For Quartz Kitchen Countertop Making

$25,000 - $30,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Machine Features Jumbo slab optional, Max cutting size: 3500*2200 mm Full size miter cutting optional 1. Super heavy duty Casted iron bridge 2. Monoblock frame, easy for installation and transportation 3. Side beam only 4 meter, require less footprint 4. 25Hp Italian type Blade motor,30Hp optional 5. Double speed motor , Variable Frequency Drive (VFD) optional 6. Auto on/off water 7. Plunge Cutting Miter Feature 8. Heavy duty hydraulic rotate table 9. Table lock at automatically at every 45° 10.

Cobble/Paving/Wall Stone Splitting Machine

Cobble/Paving/Wall Stone Splitting Machine

$10,000 - $35,000

Type: Stone Factory Machines › Stone Tile Cutting Machines › Hydraulic Stone Splitting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Specification: 1 Hydraulic open-frame splitting machine for paving stone 2 CE certificate 3 world famous components 4 low maintain BESTLINK HYDRAULIC STONE SPLITTING MACHINE Bestlink's BRT series hydraulic stone splitting machine is suitable for splitting all types of natural and artificial stones, cube stone/curb stone/wall stone/blockstone/tiles/pavingstone/countertops/vanity tops. Every splitting machine can be integrated in a production line. It could be especially designed according to your

EM17 - 2+4  Calibrating & Bush Hammering Machine

EM17 - 2+4 Calibrating & Bush Hammering Machine

Type: Stone Factory Machines › Stone Surface Processing Machines › Bush Hammering Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

EM17 - 2+4 Calibrating and Bush-Hammered Machine • Belt Width: 700 mm • Number Of Calibrating Heads: 2 • Calibrating Motor Power: 22 kW • Calibrating Up–Down Motor Power: 0,55 kW • Diameter of Calibrating Disc Tray: 650 mm • Working Thickness: 10 – 80 mm • Diameter Of Bush Hammering Tray: 650 mm • Number Of Bush Hammering Heads: 4 • Bush Hammering Motor Power: 1,1 kW (126 Rpm) • Minimum Working Width: 300 mm • Maximum Working Width: 610 mm • Belt Motor Power: 0,75 kW • Belt Speed: 0 – 400 mm / m

CNCM-3 Multifunction Profiling-Polishing Machine

CNCM-3 Multifunction Profiling-Polishing Machine

$5,000 - $6,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Kaida CNCM-3 CNCM-3 Multifunction Polishing Machine shapes and polishes quality edges on granite, marble, and quartz.It can perform multiple different flat polishing details.The polishing wheel of each group has various polishing structures for different structures, thicknesses, densities and glosses.

COBALM LUX/LUX CU Single Head Bridge Polishing Machine

COBALM LUX/LUX CU Single Head Bridge Polishing Machine

Type: Stone Factory Machines › Stone Surface Processing Machines › Single Head Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Single head bridge polishing machine. The machine is built in electrowelded metal that has been hot galvanized and treated with epoxy coatings. Working table built in heavy metal covered with plywood staves, galvanized protection side panels. single block machine in rugged costruction, that does not require masonry work or technical assistance for installation. It is easy to use for polishing, sanding, brushing and specific rotary tool it can bush-hammered, scratch etc.. Control panel with color

YTQQ-500/600 Mono-block Bridge Cutting Machine

YTQQ-500/600 Mono-block Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

High efficiency for cutting slab & tile, flexible, accurate and reliable. With the mono-block structure, installation is not necessary for this machine, and it brings much convenience to users. Feature * Mono-block structure, side beams are fixed on the steel, solid and stable. * Equipped with infrared device for precise cutting location * Wide crossbeam of bridge structure for large size of slab cutting and it is made of strong cast iron to avoid distortion after long-term use. * Guide rail on

EOT crane

EOT crane

Type: Stone Factory Machines › Stone Handling, Loading Machines › Gantry Crane, Overhead Cranes

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx

Portable Drill For Undercut Anchor Of Stone Accessories

Portable Drill For Undercut Anchor Of Stone Accessories

$900 - $1,000

Type: Stone Hand Held Machines › Stone Hand Drill Machines

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Portable Drill for Undercut Anchor of Stone Accessories Application: Stone hand drill machines for aluminium bracket used to drill holes for undercut anchors in ceramic or stone panels of granite, marble,travertine, limestone, sand stone, concrete panels, cement fiber board, etc. For wall cladding projects. Specification: 350mm(Length)x380mm(Width)x500mm(Height). Accessory: Air Compressor, Water Pump, tools. Packing: Export Wooden Packing. Advantages: 1. High quality with long life. 2. High work

30HP Thin Stone Veneer Mighty Stone Saw Cutting Machine

30HP Thin Stone Veneer Mighty Stone Saw Cutting Machine

$12,500 - $16,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Automatic Edge Trimming Line for Slabs

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

The mighty stone saw (30 horsepower) model is compact, portable, and lighter - making the task of hauling much easier. This model comes with a smaller and faster 30 in. Blade for quicker cutting of your everyday stones. Effectively changing the stone cutting industry, this mighty stone saw has been designed to be safe, sturdy and simply low maintenance. Every aspect-from components to assembly-was designed to fit all the below criteria and do it at a reasonable price.

Bridge Stone Cutting Machine For Marble Granite Quartz Tile Cutter

Bridge Stone Cutting Machine For Marble Granite Quartz Tile Cutter

$25,000 - $30,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › Infrared Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Jumbo slab optional, Max cutting size: 3500*2200 mm Full size miter cutting optional 1. Super heavy duty Casted iron bridge 2. Monoblock frame, easy for installation and transportation 3. Side beam only 4 meter, require less footprint 4. 25Hp Italian type Blade motor,30Hp optional 5. Double speed motor , Variable Frequency Drive (VFD) optional 6. Auto on/off water 7. Plunge Cutting Miter Feature 8. Heavy duty hydraulic rotate table 9. Table lock at automatically at every 45° 10. Heavy duty green

XTJ-200 Full Automatic Line Edge Profiling, Processing Machine- Edge Grinding & Polishing Machine

XTJ-200 Full Automatic Line Edge Profiling, Processing Machine- Edge Grinding & Polishing Machine

$11,000 - $15,000

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Edge Profiling, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

XTJ-200 Automatic Combination Grinding & Polishing Machine,Kaida stone machinery product, is a professional stone slab side processing machinery, mainly used for grinding, modeling and polishing the flat edges of marble, quartz, granite or artificial stone slabs, forming bright & smooth flat edge, oblique corner and various curve edges.

70ton Four Blades Hydraulic Sawn Stone Splitting Machine Guillotine

70ton Four Blades Hydraulic Sawn Stone Splitting Machine Guillotine

$14,000 - $16,000

Type: Stone Quarry Machines › Quarry Hydro-Bags, Rock Splitter › Hydraulic Rock Splitter

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Hydraulic splitting machine It suitable for splitting all types of natural and artifical stones,used for the production of large and small materials for mosaic and stone flooring.and characterized by high reliability and easy handling,every splitting machine can be integrated in a production line,especially designed according to your needs. Using our splitting machines you could produce a wide range of products like: Cobble stones, Paving stones, Tiles for paving and cladding, Wall stones and Ke

Wanlong Manual Stone Surface Manual Arm Polishing Machine

Wanlong Manual Stone Surface Manual Arm Polishing Machine

$2,500 - $2,600

Type: Stone Factory Machines › Stone Surface Processing Machines › Arm Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Sandstone

Machinery Function Features:

1. Indigenous double speed main motor, 4.5KW-4/5.5KW-2, Lifting motor power 0.75KW 2. Eletric screw rod for front & back arm lifting 3. Pneumatic lifting head 4. Maximum polishing size 2600x900mm

NEWProdim ProCutter

Prodim ProCutter

Type: Stone Hand Held Machines › Hand Held Stone Cutter

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Simplify your production process with the ProCutter. Easily connect the ProCutter Plotter to the Proliner host software or CAD program and create the Winning Team. First measure your objects digitally and then immediately produce a physical template. This template may be useful to show your customer how an object will look like or you may need it to cut your stone, wood or glass. The ProCutter is also very useful for companies that do not have a CNC machine. Use the ProCutter Plotter as a check

NEWMB 2001 Satellite Natural Stone floor grinding machine

MB 2001 Satellite Natural Stone floor grinding machine

Type: Stone Maintenance Machines › Floor Grinding, Polishing Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Medium-size grinding machine with speed regulation, high frequency engine and three 223mm satellites. Designed to work in large spaces, however, it has relatively small dimensions, so it is used in apartment too: it is compact and easy to handle, weighs 180kg and can be easily dismantled into two parts. Very high yield (300-400 square meters per day on marble in the roughing phase), perfect flatness, and easy of use are the elements that characterize it and allows the operator to optimize costs

NEWMISTRAL SERIES - Storage and handling systems for sheets of natural stone, quartz and ceramic

MISTRAL SERIES - Storage and handling systems for sheets of natural stone, quartz and ceramic

Type: Stone Factory Machines › Stone Handling, Loading Machines › Automatic Loader, Unloader for Slabs

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

PRODUCTIVITY AND FLEXIBILITY IN SMALL SPACES The entire MISTRAL range sets the standard for automated systems for the storage and handling of sheets of marble, granite, quartz and ceramic. All MISTRAL solutions are tailor made and designed to enhance company performance, optimising the level of automation, efficiency and operator safety whilst at the same time eliminating the risk of accidents due to incorrect handling. Full integration with the cutting lines Intermac offers a complete range of

NEWHorizontal Mosaic Splitting Machine, Mosaic Chipping Machine

Horizontal Mosaic Splitting Machine, Mosaic Chipping Machine

$1

Type: Stone Factory Machines › Stone Finishing, Profiling Machines › Mosaic Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Travertine

Machinery Function Features:

Description: MOSAIC STONE CUTTING MACHINE, STONE POLISHING MACHINE, STONE BREAKING MACHINE, STONE PROFILLING MACHINE Technical Information Motor Power 1,5 kW Number of Strokes 140 min / pcs Min. Max. Stone Highest Range 10 - 50 mm Min. Max. Stone Thickness Range 10 - 50 mm Max. stone length 200mm Machine Dimensions ( W / L / H ) 1100 / 1330 / 860 mm

Let suppliers know exactly what you want to buy