Limestone Cnc Bridge Saw Machine

5 Axis CNC Granite Marble Quartz Stone Cutting For Kitchen Countertops

$30,000 - $35,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 24 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Wisdom 500CNC Bridge Cutting Machine is a 5-Axis simultaneous movement control machine with cutting,milling,carving and drilling fuctions,which can provide remote control and remote fault diagnosis. -It adopts a stone CNC 5-axis special numerical control system to achieve the processing of irregular surfaces in one installation,facilitating,monoblock frame make it easy installation and transportation. -Ether CAD bus servo. -17-bit absolute value encoding counting,with power-off memory function.

Skema Denver Monoblock Bridge Saw Cutting Machine 3-4 Axes

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

SKEMA Denver 3-4 axis monoblock bridge saw. 3-4-axis monoblock saw with rotating head through 90° (180° opt): easier and faster execution of straight and diagonal cuts. SKEMA is a modern monobloc bridge saw with tilting head and hot zinc coated frame for an exceptionally long lasting sturdiness and accuracy. It features 3 powered axes travelling on steel guideways with revolving balls protected by bellows and lubricated by a centralized system. The 0°-90° head rotation allows width and depth wis

SPRINTER 825 CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

The SPRINTER 825 CNC is a 5 axis interpolated bridge milling machine particularly flexible, suitable for the production of different types of products such as kitchen tops, bathroom tops, shower trays, engravings, bas-reliefs and various coatings for the building industry. It is a machine that allows a wide range of processes, from cutting, to milling, drilling, shaping and, thanks to the countless accessories, it is possible to carry out these operations simultaneously without moving the piece

TC1200 CNC Bridge Saw 5-axis numerically controlled cutting and shaping centre

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

The TC1200 is a genuine 5-axis numerically controlled cutting and shaping centre. It allows cuts to be made in all directions automatically without moving the slab. Very innovative, the TC1200 allows you to carry out very simply and with very high precision all cuts in materials up to 425 mm thick. Standard equipment: Cross Laser Line Laser Lubrication unit Remote control Touch-screen 15″ console Optional extras: Fixed, mobile or tilting table Tool sensor Camera Software: Included: Express Jobs

CNC 4 Axis Bridge Cutting Machine Expand 450 / 450 MC

$25,000 - $35,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

4 Axis bridge cutting machine adopts four-axis linkage CNC system control, bus absolute value servo (with power-off memory function), high-precision linear guide, rack drive, oil-immersed track structure, with multi-function, high precision and strong stability and other advantages.

3 Axis 45° 90° CNC Bridge Saw Quartz Stone Marble, Granite Cutting Machine - ASC-2032-S-3

$16,500 - $17,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

This is a 3 axis CNC bridge cutting saw machine, it is designed for stone company, this marble cutting machine can meet the diversified processing needs of the stone market. Compared with traditional infrared bridge CNC saw machine, our stone slab cutting machine has advanced servo motor and hydraulic turning table (maximum turning 85°). Not only that, this granite cutting tools also supports Vertical 90° cutting and 45° angle cutting, chamfering. If you want to know more information about this

Creat 5 5 Axis Bridge Cutting Machine

$48,000 - $55,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

5 Axis Bridge cutting machine adopt 5 Axis linkage CNC System Control,Bus-based absolute value servo (with memory function for power off).high-precision linear guide rail,ball screw transmission.oil-immersed track structure.with multi-function, high precision,strong stability and other advantages.Its processing functions include arbitrary-shaped lines,fan-shaped plates, wash basin and special-shaped edge profiling,etc.The equipment has multiple processing functions,wide application, small space,

Granite Marble CNC Bridge Cutter Machine For Stone Cutting With CE

$6,800 - $19,880

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

control system Self developed bridge cutting customization system (touch, manual input) Tilt angle of saw blade 0-45° Main motor power 15KW Standard RPM 2800r /min Electric spindle 7.5kw Sports power (W) 18.5kW voltage 380V/50Hz transmission X/Y gear rack+planetary gearbox+Z ball screw guide rail 30 straight square guide rails XYZ motion system Communication 1.5KW bus servo Cutting speed of X-axis 1-12000 millimeters per minute Y-axis cutting speed 1-12000mm/min Z-axis cutting speed 1-2000 milli

Marble, Granite Stone CNC Bridge Saw Cutting Machine

$20,000 - $50,000

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 18 Months

Usage: Granite, Marble, Limestone, Slate, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Marble, Granite Stone CNC Bridge Saw Machine- CNC Bridge Cutting Machine

QUADRIX DV 1100 Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Quartzite, Sandstone, Travertine

Machinery Function Features:

QUADRIX DV 1100 is a medium-sized numeric control cutting and shaping center with 5 interpolated axes having Z axis stroke 1000 mm, rotary head, prepared for single or incremental – pass cutting and shaping processes for the performance of marble, granite, stone and sintered materials products. It is suitable for oblique, circular, elliptical, inclined cuts, rectilinear, concave, convex, arched, elliptic shapes, excavations of two-dimensional and three-dimensional slabs. The possibility to mount

Brembana Venkon - 5 axis monoblock CNC bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Its the new generation of a numerically controlled 5 axes Bridge Saws. Extremely compact and easy to install; it doesnt require any foundations, even as a possibile re-installation. The machine is built with the needs of workshops in mind and it is used for cutting slabs up to 200 mm in thickness (with blade 625 mm) of natural stone, synthetic stone, and ceramic. Advantages: - The weight of the machine up to 4.400 kg guarantees high constant precision over time. - Blade automatic redressing stat

TC1350 V2 CNC Bridge Saw 5 Axis Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

5 axis CN machine (3 or 5 interpolated according to the versions), the TC1350 V2 permits to make cuts in all directions automatically without moving the slab. The 360° disc rotation does not require any turning table. Standard equipment: Cross Laser Line Laser Lubrication unit Remote control Touch-screen 15″ console 1 disc housing Ø1650 mm Optional extras: Fixed, mobile or tilting table Tool sensor Camera Tool magazine 11 slots Available versions: Track lengths available : *5880 mm *8505 mm *111

Discovery 5 Axis Plus CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

It is equipped with a suction cups device, used to move cut pieces to increase the production process while reducing processing time. Machine frame and work table made of hot galvanized dipped electro-welded steel that guarantees high water resistance. Digital brushless type axis drives, coupled with high precision gear motors, linear guides with recirculating balls protected by bellows, allow for extremely precise cuts. The blade motor has 24Hp - 17.6 kW power, can reach a maximum speed of 4300

Denver Tecnika Elite /Tecnika Elite Solid 5 axes monoblock bridge saw

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Tecnika ELITE is the new 5-axis interpolated cutting center specifically designed for processing natural and engineered stone, ceramic and ultra-compact materials fully meeting the very parameters - speed, accuracy, working strokes and software interface - required for all tasks connected to efficient slab fabrication encompassing trimming, de-tensioning cuts, mitering, multidirectional and curvilinear jobs, as well as inner cut-outs. Advanced materials such as engineered stone, ceramic and othe

KBS 47 Prima Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Machinery Function Features:

KBS 47 Prima Saw Machine Circular slide bearing with rise and fall-rest and cross carriage from vibrationless cast iron offers extraordinary cutting precision. Excellent cutting stability and noise reduction at the same time. The follow-up cost for reworking such as grinding is reduced to a minimum. User friendly due to control table and portable control panel. This ensures quick, optimal positioning of the saw blade. Automatic interval central lubrication system, individually clocked, avoiding

5 Axis CNC Bridge Saw Cutting Machine For Granite Marble Stone

$6,800 - $19,880

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

control system Self developed bridge cutting customization system (touch, manual input) Tilt angle of saw blade 0-45° Main motor power 15KW Standard RPM 2800r /min Electric spindle 7.5kw Sports power (W) 18.5kW voltage 380V/50Hz transmission X/Y gear rack+planetary gearbox+Z ball screw guide rail 30 straight square guide rails XYZ motion system Communication 1.5KW bus servo Cutting speed of X-axis 1-12000 millimeters per minute Y-axis cutting speed 1-12000mm/min Z-axis cutting speed 1-2000 milli

Bridge Saw - CNC Bridge Cutting Machine - Cnc Router

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Helios Cut 500 is a fast and performing 5 interpolated axes bridge saw. It has been developed for high precision cutting processes on ceramics, quartzites, as well as marbles and granites. The exclusive characteristic is the stainless steel monolithic structure, which guarantees a total endurance against corrosion and a remarkable duration over time. The bridge saw can have both manual and total automated functions thanks to the advanced levels of the software, which allow to process easily a lo

5 Axis CNC Bridge Saw Cutting Machine

$6,800 - $19,880

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

control system Self developed bridge cutting customization system (touch, manual input) Tilt angle of saw blade 0-45° Main motor power 15KW Standard RPM 2800r /min Electric spindle 7.5kw Sports power (W) 18.5kW voltage 380V/50Hz transmission X/Y gear rack+planetary gearbox+Z ball screw guide rail 30 straight square guide rails XYZ motion system Communication 1.5KW bus servo Cutting speed of X-axis 1-12000 millimeters per minute Y-axis cutting speed 1-12000mm/min Z-axis cutting speed 1-2000 milli

Brembana kosmos 5-axis CNC monolithic bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Its the new generation of a numerically controlled 5 axes Bridge Saws. Extremely compact and easy to install; it doesnt require any foundations, even as a possibile re-installation. This machine is built with the needs of workshops in mind and it is used for cutting slabs up to 200 mm thickness (with blade 625 mm) of natural stone, synthetic stone, and ceramic. Advantages: - The weight of the machine up to 5.100 kg guarantees a high constant precision over time - the machine can therefore perfor

CNC 5-Axis CNC Bridge Cutting Machine For Stone Processing

$6,800 - $19,880

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

control system Self developed bridge cutting customization system (touch, manual input) Tilt angle of saw blade 0-45° Main motor power 15KW Standard RPM 2800r /min Electric spindle 7.5kw Sports power (W) 18.5kW voltage 380V/50Hz transmission X/Y gear rack+planetary gearbox+Z ball screw guide rail 30 straight square guide rails XYZ motion system Communication 1.5KW bus servo Cutting speed of X-axis 1-12000 millimeters per minute Y-axis cutting speed 1-12000mm/min Z-axis cutting speed 1-2000 milli

Brembana Impact Monoblock 5-axis CNC bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Brembana Impact Monoblock 5-axis CNC bridge saw is the right choice for workshops that require a complete machine with minimal investment. It can carry out rectangular, shaped, vertical or inclined cuts, 3D profiling, pocketing, and lettering operations. This machine is popularly used for cutting marble slabs, granite, synthetic stone, ceramic, and solid stone blocks as well. The monoblock support structure does not require any foundations, which minimizes both the installation and set-up cost.

BRIDGE SAW MillenniumCNC 5 axes

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone, Travertine

Italia CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 3 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Automatic centralized greased lubrication. In case of anomalies the machine stops Watertight IP 55 electric cabinet with safety thermostat Sound power level: 80 ÷ 90 dB(A)

Ideal 600 Bridge Saw Monoblock Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Ideal600 Monoblock Bridge Saw. Machine with head rotation from 0º to 90º, to cut marble, granite, quartz and porcelain slabs. Ref. 8902 Bridge Saw Monoblock Ideal600 Ref. 8902 Technical characteristics: One-piece self-supporting steel structure. The structure does not need a foundation and is completely fixed to the ground. Structure accompanied by tilting bench with wood and rubber surface. Technical characteristics: -Maximum cutting length (X axis): 3300mm -Maximum cutting width (Y axis): 2000

Forma Bridge Saw With CNC

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone

Machinery Function Features:

Forma Bridge Saw With CNC: Machine for the all handicraft and industrial laboratories for processing marble and granite. Disc diameter up to 1.200 mm, management of 4 axes, head inclination motorised. CNC for programming slabs cut, linear, concave and convex shaping, honing of shapes with side of the disc, circular and interrupted cuts. Machine suitable for both small and large workshops for marble / granite. Bridge main frame / table in cast iron for stability / minimum vibration/greater machin

Astra 5 Axis Plus CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

It is equipped with a manipulator device, used to move automatically cut pieces, in order to increase the productivity, by reducing the processing time. Automatic bridge saw with 5 interpolated axis. Machine frame and work table made of hot galvanized dipped electro-welded steel that guarantees high water resistance. The blade motor has 18Hp - 13.2 kW (S6) power, can reach a maximum speed of 3000 Rpm (Optional tools 6000 Rpm) and it can cut thicknesses up to 145mm. with disc max Ø 500 mm. Digita

Denver Formula Lab / Formula Elite Bridge Saw 5-axis interpolated cutting center

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Formula LAB is the new 5-axis interpolated cutting center specifically designed for processing natural and engineered stone, ceramic and ultra-compact materials fully meeting the very parameters – speed, accuracy, working strokes and software interface - required for all tasks connected to efficient slab fabrication encompassing trimming, de-tensioning cuts, mitering, multidirectional and curvilinear jobs, as well as inner cut-outs. Advanced materials such as engineered stone, ceramic and other

Bridge Saw LDZ 2000 Fully Automatic 5-Axis Bridge Saw And Machining Center

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

With the LDZ 2000 series, we offer a state of the art 5 axis bridge saw with automatic tool change. This provides you with the optimum machine for mastering the new daily challenges in the tough competitive environment. Especially for the future-oriented small and medium sized business, the LDZ 2000 WZW represents the perfect combination of a high precision bridge saw with a fully fledged CNC machining center. The machine covers a wide range of applications from individual kitchen countertops to

OZKKM 700/500 AQUILA CNC Bridge Saw Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Saw Motor Power: 20 kW Max Saw Diameter: 700 mm Maximum Working Length: 3500 mm Maximum Working Width: 2100 mm Maximum Working Thickness: 240 mm Water Consumption: 50 lt/dk Machine Length: 5500 mm Machine Width: 3200 mm Machine Height: 4000 mm OZKKM 700/500 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 700/500 is mo

Bridge Saw Cat. 850 Mod. Vic-Tab Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Sandstone

Machinery Function Features:

Bridge saw CAT. 850 modello VIC-TAB: machine with 3 linear axes X (trolley), Y (bridge), Z (head), simple and sturdy with two-beam bridge, designed and manufactured to satisfy the most demanding companies in the stone machining sector for traditional cutting and shaping. Suitable for manual, semi-automatic and automatic machining work with latest-generation "SIPRO siax150" numerical control. The work bench is sturdy and heavy and can be rotated 360° manually with a precision bearing. It can be t

Brembana Sprint Numerically Controlled 5 interpolated-axis bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Numerically Controlled 5 interpolated-axis bridge saw equipped with tilting head and fixed table to carry out any type of machining, cutting (straight or shaped, vertical or inclined), 3D profiling and milling operations, on slabs and stone blocks. This machine can work one shot or step by step to shape marble, granite, composite stone and ceramic pieces. The 4.250 mm stroke of the bridge guarantees easy machining of large sized slabs or stone blocks. Brembana sprint is also available with the f

OZKKM CRUX CNC Bridge Saw 5 Axis Stone Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

OZKKM CRUX is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of CRUX is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc configuration can be expl

5 Axis CNC Bridge Saw CSA 598 Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The 5 axis bridge saw CSA 598 synonymous with precision, reliability and economy. Combined with an autoloader, a band saw table and a manipulator for automatic removal of the sawn workpieces, the result is a high performance sawing system for industrial production. The modular machine concept of the CSA 598 also allows the machine to be equipped with a 2D or 3D waterjet head. By combining a bridge with waterjet head and a saw bridge, the performance of the plant can be significantly increased, e

Brembana Gixa Large sized 5-axis CNC bridge saw machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite

Machinery Function Features:

Numerically Controlled 5 interpolated-axis bridge saw equipped with tilting head and fixed table to carry out any type of machining, cutting (straight or shaped, vertical or inclined), 3D profiling and milling operations, on slabs and stone blocks. This machine can work one shot or step by step to shape marble, granite, composite stone, and ceramic pieces. The 4.250 mm stroke of the bridge guarantees easy machining of large sized slabs or stone blocks. Its extraordinary stability allows to reach

Cnc Cutting Machine - Cnc Bridge Saw - Router

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Basalt, Quartzite

Machinery Function Features:

Helios Cut 500 is a fast and performing 5 interpolated axes bridge saw. It has been developed for high precision cutting processes on ceramics, quartzites, as well as marbles and granites. The exclusive characteristic is the stainless steel monolithic structure, which guarantees a total endurance against corrosion and a remarkable duration over time. The bridge saw can have both manual and total automated functions thanks to the advanced levels of the software, which allow to process easily a lo

OZKKM 750/650 AQUILA CNC Bridge Saw Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

OZKKM 750/650 AQUILA is monobloc bridge sawing machines that, thanks to the advanced functionality, allow every stone fabrication shop to be equipped with accurate and quick machines, without giving up quality. The standard versions of AQUILA 750/650 is monobloc, i.e.: mounted on a monolithic structure of steel carpentry that assures utmost rigidity and stability levels, with no need of any concrete foundation. For this reason, if necessary, they can be easily moved elsewhere. The monobloc confi

Brembana Formax Jet 5-axis bridge saw jet machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Artificial Stone, Basalt, Quartzite, Sandstone

Machinery Function Features:

Brembana Formax Jet is a Numerically Controlled 5 interpolated-axis bridge saw equipped with tilting head and fixed table. It can carry out any type of machining, cutting (straight or shaped, vertical or inclined), 3D profiling and milling operations, on marble, granite, composite stone, and ceramic as well as stone blocks. The machine is equipped with an abrasive waterjet cutting head that, working in combination with the diamond disk, enables automating natural and composite stone slab cutting

5 Axis CNC Bridge Saw Machine CSA 567/569

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

The modern 5 axis CSA 567/569 rotary head saw for blade diameters up to 1600 mm is ideal for solid work. The speed of the saw motor is reduced via a gearbox so that the full motor power is available, especially in the low speed range. An optional vacuum suction device with a max. load capacity of 1500 kg can also automate the manipulation of the workpieces.

Affordable Bridge Saw - Cnc Router - Countertop CNC Bridge Cutting Machine

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features:

Helios Cut 500 is a fast and performing 5 interpolated axes bridge saw. It has been developed for high precision cutting processes on ceramics, quartzites, as well as marbles and granites. The exclusive characteristic is the stainless steel monolithic structure, which guarantees a total endurance against corrosion and a remarkable duration over time. The bridge saw can have both manual and total automated functions thanks to the advanced levels of the software, which allow to process easily a lo

5 axis CNC Bridge Saw Orbit A5

Type: Stone Factory Machines › Stone Slab Cutting Machines › CNC Bridge Cutting Machine

Warranty: 12 Months

Usage: Granite, Marble, Limestone, Sandstone

Machinery Function Features:

This bridge saw has everything a technologically advanced bridge saw needs to have today: 5 interpolated axis, spindle with half inch fitting with trough-spindle lubrication, tilting table up to 85°, vacuum manipulator system for parts movement during automatic cut process, on-board camera, blade presetting and stone thickness probe. The machine in details -This machine is a fully interpolated 5 axis bridge saw. The Y axis is moved by a gantry system. This guarantees a perfect square of the brid